• 한국통신학회논문지
• /
• 제16권12호
• /
• pp.1348-1356
• /
• 1991

MAN(Meropolitan Area Network)은 높은 전송속도로, 텍스트 위주의 트래픽뿐만 아니라 음성 신화와 같은 실시간 트래픽도 제공하는 도시 영역의 네트워크로써, 그 필요성이 커가고 있다. 특히 광섬유를 이용한 MAN의 경우 기존의 네트워크 구조를 그대로 사용하면 스테이션의 수가 제한되거나, 중간 처리노드가 많아 신뢰성이 떨어지고, 음성신호의 전송을 위한 지연시간을 만족하지 않는 등의 단점이 있다. 또한, 이러한 단점들을 극복하기 위하여 제안된 여러 MAN이나 IEEE 802.6 표준안으로 제안된 MAN의 경우, 그 방식이나 구현이 복잡하다고 할 수 있다. 본 연구는 서울의 43개 전화국들을 중심으로 지역망간을 접속하는 광섬유를 이용한 계층적 Metropolitan Area Network의 설계 및 성능 평가에 관한 것이다. 기존의 네트워크를 검토하여 그 단점을 극복할 수 있도록 LAN과 백본 네트워크 각각에 적합한 토폴로지와 액세스 프로토콜을 설계하여, 성능을 분석한다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 춘계학술대회 논문집
• /
• pp.1064-1072
• /
• 2005

Since July 1st of 2004, a transit fare system of Seoul metropolitan area has been changed. The distinguished characteristics of the system can be described as two issues that can be summarized by distance based fare for Seoul metropolitan area and fare discount between bus and transit in Seoul city area. In Seoul city area, some existing subway users, however, complained the raised fare compared to previous fare system. An alternative, season ticket was introduced by Seoul local government in July 15th of 2004. Due to the ticket, even though periodic subway users could reduce average subway costs, the benefit of the season ticket was very limited to subway users in Seoul city area. Therefore, this study proposes a methodology to enlarge the benefit of the existing season ticket in Seoul metropolitan area.

• 한국지구과학회지
• /
• 제38권2호
• /
• pp.105-114
• /
• 2017

Two dimensional finite element method with quadrilateral basis functions was applied to the spherical high order filter on the spherical surface limited area domain. The basis function consists of four shape functions which are defined on separate four grid boxes sharing the same gridpoint. With the basis functions, the first order derivative was expressed as an algebraic equation associated with nine point stencil. As the theory depicts, the convergence rate of the error for the spherical Laplacian operator was found to be fourth order, while it was the second order for the spherical Laplacian operator. The accuracy of the new high order filter was shown to be almost the same as those of Fourier finite element high order filter. The two-dimension finite element high order filter was incorporated in the weather research and forecasting (WRF) model as a hyper viscosity. The effect of the high order filter was compared with the built-in viscosity scheme of the WRF model. It was revealed that the high order filter performed better than the built in viscosity scheme did in providing a sharper cutoff of small scale disturbances without affecting the large scale field. Simulation of the tropical cyclone track and intensity with the high order filter showed a forecast performance comparable to the built in viscosity scheme. However, the predicted amount and spatial distribution of the rainfall for the simulation with the high order filter was closer to the observed values than the case of built in viscosity scheme.

• 한국해양공학회지
• /
• 제18권6호
• /
• pp.79-83
• /
• 2004

The curved blocks which compose the bow and stem of a ship contain many skewed joints that are inclined horizontally and vertically. Most of these joints have a large fitness error and are continuously changing their form and are not easily accessible. The welding position and parameter values should be appropriately set in correspondence to the shape and the inclination of the joints. The welding parameters such as current, voltage, travel speed, and melting rate, are related to each other and their values must be in a specific limited range for the sound welding. These correlations and the ranges are dependent up on the kind and size of wire, shielding gas, joint shape and fitness. To determine these relationships, extensive welding experiments were performed. The experimental data were processed using several information processing technologies. The regression method was used to determine the relationship between current voltage, and deposition rate. When a joint is inclined, the weld bead should be confined to a the limited size, inorder to avoid undercut as well as overlap due to flowing down of molten metal by gravity. The dependency of the limited weld size which is defined as the critical deposited area on various factors such as the horizontally and vertically inclined angle of the joint, skewed angle of the joint, up or down welding direction and weaving was investigated through a number of welding experiments. On the basis of this result, an ANN system was developed to estimate the critical deposited area. The ANN system consists of a 4 layer structure and uses an error back propagation learning algorithm. The estimated values of the ANN were validated using experimental values.

• 품질경영학회지
• /
• 제36권2호
• /
• pp.20-27
• /
• 2008

Tolerance design has been identified as an important research area and a number of models have been proposed in the literature. This paper investigates the effect of limited capacity on tolerance design for products with nominal-the-best type (N-type) quality characteristics. The model is developed under the assumption that the reprocessed and nonreprocessed items are produced by the same manufacturing process and therefore their quality characteristics are identically and independently distributed. Profit models are constructed which involve four price/cost components; selling price, cost incurred by imperfect quality, reprocessing and quality inspection costs. Methods of finding the optimal tolerance limits are presented, and a numerical example is given. Sensitivity analyses are also performed to study the effect of a process standard deviation on this model.

• 한국관개배수논문집
• /
• 제18권1호
• /
• pp.68-80
• /
• 2011

To provide a operation rule curve for reservoir with low ratio of watershed area to paddy field area, Duckyong reservoir with watershed area of $15.8km^2$ and paddy field area of 1,071ha was selected, in which 4 meters are being heightened and full water levels will be increased from EL.26.0m to EL.30.0m, total water storages from 365.6M $m^3$ to 708.0M $m^3$. There was no operation rule curve that satisfied over 90% reliability of water supply in reservoir with watershed area of 1.48 times of paddy field area. The differences between observed and simulated reservoir daily water storages were minimized to determine parameters for simulating reservoir inflow in case of paddy field area of 550ha from 1991 to 2010. A operation rule curve was drawn to have a maximum storage with total water storage, which was in paddy field area of 700ha with ratio of 2.3 between watershed area and paddy field area. This case showed that annual irrigation water supply was 668M $m^3$ and instream flow of 57M $m^3$, water supply reliability of 55.6% in normal operation, and annual irrigation water supply was 605M $m^3$ and instream flow of 38M $m^3$, water supply reliability of 95.6% in withdrawal limited operation. Water supply reliabilities showed 35.6% without flood regulation and 17.8% with flood regulation in existing reservoir before heightening.

• 대한건축학회논문집:계획계
• /
• 제35권12호
• /
• pp.115-125
• /
• 2019

Most of construction at urban area is now undertaking a redevelopment because currently the most of city is full. But the research about the collision of urban tissue at urban redevelopment area are very limited and there are many issues at urban redevelopment area. So the purpose of this study is to analyze the collision between different urban tissue at urban redevelopment area and suggest proper method for urban redevelopment. The area inside of four main gates, especially Chung Jin, Gong pyeong, Mu gyo- Da dong district are selected to analyze because the area inside of these gates is the oldest urban redevelopment area and each of them has a different redeveloped method. And current status of research area's urban tissue and collision situation are analyzed by macro and micro scale of view. The results of this study were as follows; Ignoring the timeline of the urban redevelopment process can be a major issue in collision between urban tissue. Therefore, the consideration of intermediate stage of redevelopment process is needed by making public area, a temporal use of vacant lot and changing architectural elements can make a harmony between different urban tissue.

• 대한임베디드공학회논문지
• /
• 제7권5호
• /
• pp.277-284
• /
• 2012

To meet the usage of discrete wavelet transform (DWT) on potable devices, this paper implements 2-level DWT using a reference many-core processor architecture and determine the optimal many-core processor. To explore the optimal many-core processor, we evaluate the impacts of a data-per-processing element ratio that is defined as the amount of data mapped directly to each processing element (PE) on system performance, energy efficiency, and area efficiency, respectively. This paper utilized five PE configurations (PEs=16, 64, 256, 1,024, and 4,096) that were implemented in 130nm CMOS technology with a 720MHz clock frequency. Experimental results indicated that maximum energy and area efficiencies were achieved at PEs=1,024. However, the system area must be limited 140mm2 and the power should not exceed 3 watts in order to implement 2-level DWT on portable devices. When we consider these restrictions, the most reasonable energy and area efficiencies were achieved at PEs=256.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.952-960
• /
• 2009

Foundation soils are greatly influenced on the stability of structures. The soft clay deposited in Incheon Port area is named either nomally consolidated clay or unconsolidated clay. New harbor structures will be constructed in Incheon Port area. Not sufficient soil boring datum are obtained from the filed soil exploration due to limited time and cost. The harbor construct site is pretty large area and the soils are not homogenous. This paper presented the result of reliability analysis which was performed by both Bayesian approach and analysis of variance.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(4)
• /
• pp.255-258
• /
• 2000

This thesis shows controlling the mobile robot with distance information gotten with ultrasonic sensors, and analysis of captured image. The ultrasonic sensors supplies more accurate distance data in limited area but shows unstable data unlimited area while image data generally shows stable data, but this requires so much time because of amounts of calculation. So this thesis considers the merits of ultrasonic sensors and image to implement robot system .