• Journal of Surface Science and Engineering
• /
• v.29 no.5
• /
• pp.393-398
• /
• 1996

Soft magnetic properties and microstructural evolution of FeTaNC films were investigated, and compared with FeTaN and FeTaC films. Effects of substrate species (glass vs. $CaTiO_3$) on the magnetic properties were also investigated. Co-addition of N and C significantly enhance the grain refinments and magnetism, compared with N or C addition only. Good soft magnetic characteristics of coercivity of 0.17 Oe, permeability of 4000 (5MHz), and saturation flux density of 17 kG can be obtained in the FeTaNC in the relatively wide process windows. While these values appears to be similar to those of FeTaN on glass substrate, most distinctive difference between FeTaNC and FeTaN(or C) is in the effects of substrate. Whereas FeTaNC films show good magnetic characteristics for both glass and $CaTiO_3$ substrates, FeTaN(or C) films show significant degradation on the $CaTiO_3$ substrate.

• Proceedings of the SAREK Conference
• /
• 2003.07a
• /
• pp.241-241
• /
• 2003

• Journal of the Economic Geographical Society of Korea
• /
• v.4 no.1
• /
• pp.19-35
• /
• 2001

This paper is concerned with the relationships between large firms with global reaches in their markets and subcontracting firms, mostly small and medium-sized firms. It then attempts to focus in more detail on the dynamic relational dimensions between the two. In doing so, we draw upon the secondary data and the results of interviewing survey with some senior managers. The empirical study shows that the localisation of subcontracting networks have been increasingly reinforced thanks to the increasing tendency of vertical disintegration by LC. However, it is identified that there is a tendency that local subcontractors are specialised in producing relatively low value-added and low technology-intensive electronic parts/components. Based on these results, the author suggests the implications of regional economic development in the context of innovation and learning.

• ETRI Journal
• /
• v.31 no.2
• /
• pp.105-110
• /
• 2009

In this paper, we propose a curved projection integral imaging system to improve the horizontal and vertical viewing angles. The proposed system can be easily implemented by additional use of a large-aperture convex lens in conventional projection integral imaging. To obtain the simultaneous display of 3D images through real and virtual image fields, we propose a computer-generated pickup method based on ray optics and elemental images, which are synthesized for the proposed system. To show the feasibility of the proposed system, preliminary experiments are carried out. Experimental results indicate that our system improves the viewing angle and displays 3D images simultaneously in real and virtual image fields.

• 한국전산유체공학회:학술대회논문집
• /
• 2006.05a
• /
• pp.408-411
• /
• 2006

• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.994-997
• /
• 2003

Simple tuning formulae are derived to design a Pl controller to meet the gain and phase margin specifications. These formulae are suitable for the auto-tuning of a process where the robustness should be guaranteed. The auto-tuned PI controller is examined for the speed regulation of a PM synchronous motor.

• Journal of Magnetics
• /
• v.9 no.3
• /
• pp.69-74
• /
• 2004

A method of processing signals of unaligned geomagnetic sensors placed on the seabed is presented. The offset drifts of the fluxgate sensors are processed by polynomial fitting and the orientations of the sensor axes are found by minimizing the noise power using wavelet analysis. The noise power was reduced by 9.1 dB by processing the components of magnetic field separately using subtraction filter, polynomial fitting and wavelet analysis.

• ETRI Journal
• /
• v.28 no.3
• /
• pp.347-354
• /
• 2006

The characteristic variation of 3-dimensional (3-D) solenoid-type embedded inductors is investigated. Four different structures of a 3-D inductor are fabricated by using a low-temperature co-fired ceramic (LTCC) process, and their s-parameters are measured between 50 MHz and 5 GHz. The circuit model parameters of each building block are optimized and extracted using the partial element equivalent circuit method and an HSPICE circuit simulator. Based on the model parameters, the characteristics of the test structures such as self-resonant frequency, inductance, and quality (Q) factor are analyzed, and predictive modeling is applied to the structures composed of a combination of the modeled building blocks. In addition, characteristic variations of the 3-D inductors with different structures using extracted building blocks are also investigated. This approach can provide a characteristic estimation of 3-D solenoid embedded inductors for structural variations.

• Journal of Power System Engineering
• /
• v.21 no.1
• /
• pp.50-56
• /
• 2017

To increase the enthalpy exchange efficiency of ERV elements, the moisture exchange character must be improved. The moisture exchange efficiency depends on material characteristics. The material used for ERV is Hwang-to paper based on Han-ji which is Korean traditional paper. The paper has excellent performance in moisture exchange and heat transfer compared with polymer and other papers. To have an anti bacteria performance and to improve moisture exchange performance of Han-ji, Hwang-to is added to the Han-ji. The enthalpy exchange efficiency of the Hwang-to paper shows 5% greater than that of the conventional paper. In case of Escherichia Coli, the reduction rate of bacteria is 96.6% and in case of Pseudomonas, the reduction rate of bacteria is 97.5%. The ERV element made of Hwang-to paper has a great possibility as an ERV element.

• Fashion & Textile Research Journal
• /
• v.8 no.1
• /
• pp.134-138
• /
• 2006

The washing efficiency of two types of washing machine- drum(drum washing) and drum using steam jet system(steam drum washing) was studied. The purpose of this paper is to clarify the performance of new steam drum washing. The relationship between washing temperature and washing efficiency(reflectance(%)) by soil removal, and that between washing temperature and electric energy consumption, Fabric damage evaluated by Danish wear method, Fabric shrinkage(%) during laundering were investigated, and compared with those in drum washing machine. Washing efficiency of steam drum washing according to washing temperature is better than that of drum washing. Electric energy consumption and fabric damage in steam drum washing are lower than those of drum washing. Fabric damage increased as washing temperature increased. Shrinkage of fabrics in steam drum washing and drum washing are about same. Therefore, we assumed that in the case of steam drum washing using steam jet system, washing efficiency remarkably increased, and fabric damage decreased, even with a lot of saving in given electric energy and water used.