• The Journal of Internal Korean Medicine
• /
• v.27 no.3
• /
• pp.572-578
• /
• 2006

Objectives : This study investigated whether taking herbal medicine over the long-term had any side effects of liver damage. Methods : We checked LFT levels of the 58 admitted patients. Results : When we compared admission LFT levels with discharge LFT levels, we found the levels of AST, ALT and LDH had decreased. This test showed statistically significant decrease. When we compared admission LFT levels with discharge LFT levels, we found the increases of discharge LFT levels fell within the standard deviation. When we compared admission LFT levels with discharge LFT levels, we found the levels of LFT did not increase as much as two standard deviations. Conclusions : According to the above results, taking herbal medicine over a long-term did not have any side effects of drug-induced liver damage.

• Journal of Korea Association of Health Promotion
• /
• v.3 no.2
• /
• pp.121-136
• /
• 2005

Background/Aims The liver funtion tests(LFTs), such as aspartate aminotransferase(AST), alanine amino-transferase(ALT), r -glutamyl transferase( r -GT), have been widely used for screening tests but their low positive predictive value can cause many false positive results. To evaluate the clinical usefulness of these tests, we analyzed serial LFT results of single factory workers and compared the risk factor's in groups divided by the serial LFT results. Methods From June 2001 to October 2001, 1223 consecutive healthy workers in a single factory were enrolled and questionnaire, LFT and liver ultrasonography were performed. Previous LFT results were collected from Annual Health Examination Survey. According to the abnormalities in serial LFT, participants were classified into three groups (abnormal-in-both, alternating normal-in-both) and the risk factors were compared among these groups using multiple logistic regression Results The prevalence of LFT abnormality in a single test was 16.8% but, in serial LFT, only 5% of participants showed consistent abnormality. The risk factors for abnormal-in-both group, compared with alternating group, were liver ultrasonography abnormality such as fatty liver(odds ratio, 2.2; p=0.026) and heavy alcohol intake (more than 210g/week) (odds ratio, 7.2;P=0.064). HBsAg was not significant risk factor for any of the three groups. ConclusionIn factory workers with serial LFT abnormality, alcoholic liver disease could be the principal cause of abnormal LFT. Even if HBsAg were positive in patients with abnormal LFT, there is a possibility of another causes for LFT abnormalities such as alcoholic liver disease and nonalcoholic steatosis or steatohepatitis

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1998.10a
• /
• pp.123-128
• /
• 1998

This paper proposes design of LFT-based fuzzy controllers for model-following, which are better than the previous input-output linearization controllers, which are not able to follow the model system states and which do not guarantee the stability of all states. The method proposed in this paper provides a LFT-based Takagi-Sugeno(T-S) fuzzy controller with guaranteed stability and model-following via the following steps: First, using LFT(Linear Fractional Transformation) and T-S fuzzy model, controllers, are obtained. Next, error dynamics are obtained for model-following, and errors go to 0(zero). Finally, a T-s fuzzy controller that can stabilizxe the system with the requirement on the control input satisfied is obtained by solving the LMIs with the MATLAB LMI Control Toolbox and a model-following controller is obtained. Simulations are performed for the LFT-based T-S fuzzy controller designed by the proposed method, which show better performance than the results of input-out ut linearization controller.

• The Journal of Korean Medicine
• /
• v.37 no.1
• /
• pp.34-40
• /
• 2016

Objectives: To observe safety and efficacy of herbal medicine for psoriasis patients. Methods: We did retrospective chart review for 107 psoriasis patients who had been treated by herbal medicine for 2 months, and we analyzed the liver function test (LFT) results and Psoriasis Area and Severity Index (PASI) scores of before and after the treatment. Results: The mean LFT and the number of patients with abnormal LFT decreased after the treatments. More than 95% of patients with normal LFT maintained normal results at after the treatment, and only 2.1% and 4.6% patients with normal LFT showed abnormal Glutamic Oxaloacetic Transaminase (GOT) and Glutamic Pyruvic Transaminase (GPT) results at after the treatment. Also, both mean PASI scores for all patients and patients with abnormal LFT before the treatment decreased significantly. Conclusions: This study suggest that herbal medicine may be safe and effective treatment for psoriasis.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.8
• /
• pp.3625-3630
• /
• 2013

The modularization accomplished a big contribution in cost down and assembly-time shortening and the quality increase. But few improvements were made to this design largely due to the inflexibility of steel. In recent years, door modules made of PP-LFT material is manufactured using injection molding method. As a result, the plastic door modules allow more flexibility of door shape and become lighter. Warpage is generally large in the molded plastic door carrier plate due to the limitation of gate location and the fiber orientation. So after a few test injection the mold compensation processing for the improvement of an assembly characteristic. This research was performed to determine the factors that contribute to warpage for a injection-molded door carrier plate and presented differences in three mesh types of meshing method and its results. as a result we can improve process of tooling modification can reduce process of trial and error.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.5
• /
• pp.65-72
• /
• 1994

We resolve the suboptimal $\infty$ control problem using (J,J')-lossless coprime factorization by transforming the linear fractional transformation (LFT) into chain scattering description (CSD) in discrete-time systems. The condition transformed LFT into CSD is that the inverse matrix of $P_{21}$ of standard plant exists. But, this paper presents the method of transforming LFT into CSD for 4-block problem in case that the inverse matrix of $P_{21}$ of standard plant does not exist and parameterization of the all suboptimal $\infty$T controllers using (J,J')-lossless coprime factorization. It is shown that this method can resolve the suboptimal $\infty$ control problem solving only two Riccati equations in discrete-time systems.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.6
• /
• pp.133-138
• /
• 2017

Recently, CFRP composites are widely used as lightweight materials have with excellent mechanical properties and can beare widely used in various fields. In general, thermosetting resins are used for CFRP. However, in recent years, studies have been carried out using thermoplastic resins have been actively carried out to overcome the disadvantages of thermosetting resins. The LFT-D system is a molding method in which a fiber is directly cut to a the desired length while being impregnated with a thermoplastic resin to produce a compound and that is then press-molding molded to form the product. In this paper, before the production of the trailing arm, the compression molding analysis was carried out in order to grasp the problems that may occur during production. Through cCompression molding analysis was applied to calculate of the minimum press pressure and to compare and analysis analyze the molding conditions characteristic required to formfor forming the trailing arm.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.5
• /
• pp.25-30
• /
• 2017

Carbon-fiber-reinforced plastic (CFRP) composite materials have been widely used in various industrial fields because the design variables can be adjusted according to the application of the required structure. Thermosetting and thermoplastic resins are used as the base materials of CFRP composites for the lightweight construction of automotive components. Thermoplastics have several advantages such as no curing and recyclability compared to thermosetting resin. In this study, CFRP composites were made using the Long-Fiber Thermoplastic-Direct (LFT-D) process. The LFT-D process includes an in-line production system that directly impregnates a thermoplastic resin, extrudes the composite material, and molds it. This process increases the strength and decreases the molding time. The tensile strength characteristics on the mechanical properties of CFRP were analyzed according to the parameters of LFT-D based on thermoplastics. To analyze the properties of CFRP, the specimens were prepared based on the tensile test standard ASTM 3039 of composite materials.

• Journal of Acupuncture Research
• /
• v.17 no.2
• /
• pp.11-18
• /
• 2000

Bee-venom Acupucture has good effect on pain control but We may be anxious about the problem of Liver and Kidneys on many times treated patients. Therefore, In order to analysis the clinical form, We have observed the LFT, RFT of 37 patients who visited Won-Kwang University Kunpo Oriental Medical Hospital and treated Bee Venom therapy over 20 times from March 1999 to February 2000. The results were summarized as follows 1. The distribution of sex was 25 females, 12 males, and the average of patients age was 42.3 years 2. The distribution of disease was degenerative arthritis, HIVD of L-spine, HIVD of C-spine, spinal stenosis, RA, etc. 3. The total treated times is 1464 and the average of treated times is 39.6 times 4. The results of the LFT(AST, ALT) of 37 patients showed that normal impression is occupied 91.9% and abnormal impression is occupied 8.1%. 5. The results of the RFT(BLTN, Creatinine) of 37 patients showed that normal impression is occupied 100%. 6. The results of treatment using BV-acupunture showed that 81.1% achieved above excelent recovery 13.5% achieved above good recovery, 5.4% achieved fair recovery.

• Proceedings of the KAIS Fall Conference
• /
• 2011.12a
• /
• pp.345-348
• /
• 2011

본 논문에서는 LFT와 같은 고점도 수지의 점도를 추정하기 위한 방법을 제시하였다. 실제 사출공정에서의 점도를 추정함으로써 신뢰할 수 있는 점도데이터를 제공하기 위한 방법을 제시 하였다. 우선 금형 내에 캐비티 압력을 측정할 수 있는 시스템을 구성하였고, 이 시스템을 이용해서 실제 사출과정에서 나타나는 압력 변화를 측정하는 것이다. 상용화 된 CAE 프로그램(Moldflow)은 사출공정에서 캐비티 내부를 흐르는 수지의 압력변화를 모사할 수 있다. 만약, CAE D/B에 있는 수지의 점도 데이터가 정확하다고 가정하면, 실험에서 측정한 압력 프로파일과 CAE로부터 계산 된 압력 프로파일이 일치해야 한다. 이것이 실험값과 일치하지 않으면 가정한 값을 CAE D/B에 입력해서 일치할 때까지 반복함으로써 신뢰성 있는 점도를 추정 할 수 있다. 한편, LFT에 대하여 적용하여 최적화 된 점도 데이터도 추정할 수 있었다.