• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2021년도 학술발표회
• /
• pp.60-60
• /
• 2021

Investigating Backward-Facing Step(BFS) flow is important in that it is a representative case for separation flows in various engineering flow systems. There have been a wide range of experimental, theoretical, and numerical studies to investigate the flow characteristics over BFS, such as flow separation, reattachment length and recirculation zone. However, most of such previous studies were concentrated only on the perpendicular step angle. In this study, several numerical investigations on the flow pattern over BFS with various step angles (10° ~ 90°) and expansion ratios (1.48, 2 and 3.27) under different Reynolds numbers (5000 ~ 64000) were carried out, mainly focused on the reattachment length. The numerical simulations were performed using an open source 3D CFD software, OpenFOAM, in which the velocity profiles and turbulence intensities are calculated by RANS (Reynolds Averaged Navier-Stokes equation) and 3D LES (Large Eddy Simulation) turbulence models. Overall, it shows a good agreement between simulations and the experimental data by Ruck and Makiola (1993). In comparison with the results obtained from RANS and 3D LES, it was shown that 3D LES model can capture much better and more details on the velocity profiles, turbulence intensities, and reattachment length behind the step for relatively low Reynolds number(Re < 11000) cases. However, the simulation results by both of RANS and 3D LES showed very good agreement with the experimental data for the high Reynolds number cases(Re > 11000). For Re > 11000, the reattachment length is no longer dependent on the Reynolds number, and it tends to be nearly constant for the step angles larger than 30°.) Based on the calibrated and validated numerical simulations, several additional numerical simulations were also conducted with higher Reynolds number and another expansion ratio which were not considered in the experiments by Ruck and Makiola (1993).

• 한국항공우주학회지
• /
• 제35권8호
• /
• pp.699-705
• /
• 2007

최근의 실험 결과를 통해 하이브리드 로켓 연료의 표면에 연소가 진행되지 않은 채 남아있는 고립된 부분들이 존재함을 확인하였다. 이러한 불규칙적인 spot은 연료의 기화로 인한 분출유동(blowing velocity)과 산화제의 유동 사이에서 발생하는 경계층 교란에 의한 현상인 것으로 여겨진다. 본 연구에서는 22,500의 높은 Reynolds수와 벽면분출 현상을 효과적으로 처리할 수 있도록 LES 기법을 이용하여, 연료 표면 근처의 난류 유동 및 열전달 특성을 해석하였다. 비록 원형 그레인 아닌 단순채널 형상을 고려하였으며 화학반응이 없는 경우의 난류유동을 해석하였으나, 연료 표면에서 발생하는 불규칙한 spot의 발생은 경계층과 분출되는 유동이 상호 간섭함으로써 난류구조들의 기구학적 특성을 변경시키기 때문인 것으로 추측되는 결과들을 얻을 수 있었다.

• Structural Engineering and Mechanics
• /
• 제74권1호
• /
• pp.55-67
• /
• 2020

The common practice to predict the characteristic structural load effects (LEs) in long reference periods is to employ the extreme value theory (EVT) for building limit distributions. However, most applications ignore that LEs are driven by multiple loading events and thus do not have the identical distribution, a prerequisite for EVT. In this study, we propose the composite extreme value modeling approach using clustering to (a) cluster initial blended samples into finite identical distributed subsamples using the finite mixture model, expectation-maximization algorithm, and the Akaike information criterion; (b) combine limit distributions of subsamples into a composite prediction equation using the generalized Pareto distribution based on a joint threshold. The proposed approach was validated both through numerical examples with known solutions and engineering applications of bridge traffic LEs on a long-span bridge. The results indicate that a joint threshold largely benefits the composite extreme value modeling, many appropriate tail approaching models can be used, and the equation form is simply the sum of the weighted models. In numerical examples, the proposed approach using clustering generated accurate extrema prediction of any reference period compared with the known solutions, whereas the common practice of employing EVT without clustering on the mixture data showed large deviations. Real-world bridge traffic LEs are driven by multi-events and present multipeak distributions, and the proposed approach is more capable of capturing the tendency of tailed LEs than the conventional approach. The proposed approach is expected to have wide applications to general problems such as samples that are driven by multiple events and that do not have the identical distribution.

• 대한토목학회논문집
• /
• 제30권3B호
• /
• pp.325-335
• /
• 2010

본 연구에서는 투수층 매설에 따른 해빈안정화의 효과를 논의하기 위하여, 파 투과성구조물 해빈/해저지반의 상호간섭을 직접해석 할 수 있는 3D-수치모델(LES-WASS-3D; 허동수와 이우동, 2007)을 이용하였다. 이 모델은 투과성구조물 내부의 유체저항으로서 층류저항, 난류저항, 관성저항을 포함하고 있으며 격자 크기보다 작은 와류를 고려하기 위하여 LES기법을 도입하고 있다. 먼저, 기존의 수리모형 실험치와 본 연구의 계산치를 비교 검토하여 이용한 수치모델의 타당성 및 유효성을 검증한 후, 해빈 내부에 투수층을 설치하여 수치시뮬레이션을 실시하였다. 수치실험결과를 통하여 투수층 매설에 따른 평균지하수위의 하강, 이안류 강도의 저하 등, 배수의 메커니즘을 파악한 후, 투수층의 배치형태(평균입경, 두께, 매설깊이, 경사) 및 입사파조건(파고, 주기)에 따른 해빈 내부의 평균지하수위분포에 대하여 고찰하였다.

• Archives of Pharmacal Research
• /
• 제24권6호
• /
• pp.546-551
• /
• 2001

We have previously shown that, in circular muscle cells of the lower esophageal sphincter (LES) isolated by enzymatic digestion, contraction in response to maximally effective doses of acetylcholine (ACh) or Inositol Triphosphate ($IP_3$) depends on the release of $Ca^{2+}$ from intracellular stores and activation of a $Ca6{2+}$-calmodulin (CaM)-dependent pathway. On the contrary, maintenance of LES tone, and response to low doses of ACh or $IP_3$ depend on a protein kinase C (PKC) mediated pathway. In the present investigation, we have examined requirements for $Ca6{2+}$ regulation of the interaction between CaM- and PKC-dependent pathways in LES contraction. Thapsigargin (TG) treatment for 30 min dose dependently reduced ACh-induced contraction of permeable LES cells in free $Ca6{2+}$ medium. ACh-induced contraction following the low level of reduction of $Ca6{2+}$ stores by a low dose of TG ($10^{-9}{\;}M$) was blocked by the CaM antagonist, CCS9343B but not by the PKC antagonists chelerythrine or H7, indicating that the contraction is CaM-dependent. After maximal reduction in intracellular $Ca{2+}$ from $Ca6{2+}$stores by TG ($10^{-6}{\;}M$), ACh-induced contraction was blocked by chelerythrine or H7, but not by CCS9343B, indicating that it is PKC-dependent. In normal $Ca^{2+}$medium, the contraction by ACh after TG ($10^{-9}{\;}M$) treatment was also CaM-dependent, whereas the contraction by ACh after TG ($10^{-9}{\;}M$) treatment was PKC-dependent. We examined whether PKC activation was inhibited by activated CaM. CCS 7343B Inhibited the CaM-induced contraction, but did not inhibit the DAC-induced contraction. CaM inhibited the DAC-induced contraction in the presence of CCS 9343B. This inhibition by CaM was $Ca{2+}$dependent. These data are consistent with the view that the switch from a PKC-dependent pathway to a CaM dependent pathway can occur and can be regulated by cytosolic $Ca{2+}$ in the LES.

• 정보저장시스템학회:학술대회논문집
• /
• 정보저장시스템학회 2005년도 추계학술대회 논문집
• /
• pp.242-245
• /
• 2005

The rotating flow in the space between co-rotating disks is of considerable importance in information storage systems. Hard disk drivers(HDD) in computer are used extensively as data storage capacity. The trend in the computer industry to produce smaller disk drives rotating at higher speed requires an improved understanding of fluid motion in the space between disks. In this study, we have tried LES model for inner-disk flowfield to investigate the flow disturbance and the flow structure driven by co-rotating disks. The boundary pattern between inner region and outer region obtained lobe-shape structure clearly and its number has been validated on experimental data by our previous study. We obtain the spectra of velocity and pressure components with several frequencies. We revealed there are two kinds of disturbances, one is global wave propagation and another is local wave propagation on Ekman boundary layer.

• 한국자동차공학회논문집
• /
• 제20권4호
• /
• pp.92-102
• /
• 2012

The process of the wind noise analysis around an OSRVM is developed and is verified by simulating unsteady flow field past a generic OSRVM mounted on the flat plate at the Reynolds number of $Re_D=5.2{\times}10^5$ based on the mirror diameter. The transient flow field past a generic OSRVM is simulated with various turbulence models, namely DES-SA, LES Constant SGS, and LES Dynamic SGS. The sound radiation is predicted using the Ffowcs- Williams and Hawkings analogy. For the present simulation, the 6.35million cells are generated. Time averaged pressure coefficients at 34 locations on the surface of the generic OSRVM are compared with the available experimental data. Also, 12 Sound Pressure Levels located on the surrounding mirror are compared with the available experimental data. Both of them show good agreements with experimental data.

• Nuclear Engineering and Technology
• /
• 제41권2호
• /
• pp.199-214
• /
• 2009

High burn-up transformation process in low temperature nuclear fuel oxides material was observed in the early sixties in LWR $UO_2$ fuels, but not studied in depth. Increasing progressively the fuel discharge burn-up in PWR power plants, this material transformation was again observed in 1985 and identified as an important process to be accounted for in the fuel simulations due to its expected consequence on fuel heat transfer and therefore on the fission gas release. Fission gas release was one of the major concerns in PWR fuels, mainly during transient or accidents events. The behaviour of such a material in case of rod failure was also an important aspect to analyse. Therefore several national and international programs were launched during the last 25 years to understand the mechanisms leading to the high burn-up structure formation and to evaluate the physical properties of the final material. A large observations database has been acquired, using the more sophisticated techniques available in hot cells. This large database is discussed in this paper, providing basis to build an engineering-model, which is based on phenomenological description data and information accumulated. In addition this paper has the ambition to construct the best logical model to understand restructuring.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 춘계학술대회 논문집
• /
• pp.99-102
• /
• 2009

비정상 난류 유동장으로 분사되는 액체 제트의 액주 분열과 미립화 현상에 관한 LES를 수행하였다. 기체상태의 공기 유동 해석에 오일러리안 해법을 사용하고, 액적 추적을 위하여 라그랑지안 해법을 사용하여 기체-액체간 이상유동(two phase flow) 해석을 수행하였다. 액주의 1차 및 2차 분열이 관찰되었다. 일정한 속도로 유입되는 공기유동 중에 액체 분사 속도를 달리하여, 액체-기체 운동량 플럭스 비의 변화를 고려하여 액체 제트의 침투깊이를 조사하였으며 실험결과와 유사함을 알 수 있었다. 제트 후류에서 입자 평균직경에 대한 분석을 수행하였다.

• 한국해양공학회지
• /
• 제23권1호
• /
• pp.7-15
• /
• 2009

The aim of this study was to survey the effects of the beachface gradient on 3-D currents around the open inlets of submerged breakwaters. First, the numerical model was validated by a comparison with existing experimental data. This model is able to consider the flow through a porous medium with inertial, laminar, and turbulent resistance terms, i.e. simulate directly WAve?Structure?Seabed/Sandy beach interaction, and can determine the eddy viscosity with a LES turbulent model in a 3-Dimensional wave field (LES-WASS-3D). Using the numerical results of this model, the 3-D currents around the open inlets of submerged breakwaters were examined in relation to the beachface gradient. Moreover, the wave height distribution and mean flow around them are also discussed, as well as the distribution of the wave breaking points over the crest.