• The Transactions of the Korean Institute of Power Electronics
• /
• v.19 no.4
• /
• pp.327-331
• /
• 2014

LED(Light Emitting Diode) is a semiconductor device utilizing electroluminescent effect is a phenomenon in which a type of P-N junction diode, the light of short wavelength which a voltage is applied in the forward direction is released. LED is advantageous in reducing the energy as environmentally materials that can greatly reduce the carbon emissions, recent it has attracted attention IT(Information Technology) and GT(Green Technology) industry. In addition, there are advantages long life, high efficiency, and excellent response speed, LED have come into the spotlight as the illumination means to replace the existing fluorescent light and incandescent light bulb. When connecting to MR16 electronic transformer for existing LED driver circuit, due to malfunction of the dimmer and the electronic transformer, flicker occurs and linear dimming is not possible. Therefore, in this paper, we suggest an LED drive circuit there is no flicker with the corresponding dimming MR16 electronic transformer. Further, we explain the principles of the LED current control technique and the principle of the drive circuit of the LED, in order to validate the proposed circuit through prototyping and simulation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.6
• /
• pp.1375-1381
• /
• 2010

LED(Light Emitting Diode) is an emitting device which energy is same to the bandgap energy of p-type and n-type semiconductor junction. Recently high brightness LED is used in fish-luring light and traffic signal light alternative of normal light bulb, and widely used in the area of display pannel. Moreover nowadays LED has been used as a back light of LCD display. Recently, visible light communication(VLC) using LED, that allow two-way serial data communication between LEDs over a distance of sveral centimeters or meters, has been widely studied in the area of digital information transmission along with illumination and display. In this paper, we present LED communication system and their applications.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.226-229
• /
• 2010

LED(Light Emitting Diode) is an emitting device which energy is same to the bandgap of p-type and n-type semiconductor junction. Recently high brightness LED is used in fish-luring light and traffic signal light alternative of normal light bulb, and widely used in the area of display pannel. Moreover nowadays LED has been used as a back light of LCD display. Recently, visible light communication(VLC) using LED, that allow two-way serial data communication between LEDs over a distance of sveral centimeters or meters, has been widely studied in the area of digital information transmission along with illumination and display. In this paper, we present LED communication system and their applications.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1530-1535
• /
• 2011

Heat radiation of LED luminaires has risen a problem when applied indoor. LEDs can save energy with higher efficacy than other light sources. However, their heat radiation may increase power consumption for air-conditioning. Therefore, this paper carried out a comparative analysis on the amount of heat radiation for MR16, E26 bulb, and down-light which will be replaced to LED luminaires. Heat amount of LED-MR16 and LED-downlight was 48% and 87.5% lower than that of conventional lamps, halogen MR16 and E26 CFL, respectively. Consequently, the heat amount and indoor temperature were proportional to the power consumption of luminaire. Therefore, the use of LED luminaire can reduce the amount of heat radiation as well as power consumption.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.9
• /
• pp.2160-2166
• /
• 2013

The usability of marine lantern has been improved significantly by using the LED bulb and applying IT technology, However it is hard to fix immediately when the failure occurs, and there would be some additional costs in maintenance. Therefore, alternatives for those problems are required. In this regard, in this paper, we proposed the integrated duel-function LED marine lantern that has main and auxiliary light source at the same time so that it can operate auxiliary light source when the main light source has breakdowns or malfunctions.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.9
• /
• pp.750-754
• /
• 2012

An LED (light emitting diode) has the advantages of lower power consumption, energy saving, high efficiency, long lifetime, and environmental friendliness so that it has been getting the spotlight as a next-generation light source. Thus, the application range of an LED has been extended to various fields including indoor and outdoor lighting. Recently, the high efficient LED lighting has been developed, an LED has been extended its market rapidly every year and is expected to replace the general light source within near future. In this study were measured electrical and optical properties for 6 types of LED bulbs which are being developed to replace the general incandescent lamps, and were analysed under the standard of the omnidirectional lamp required by the Energy Star.

• Proceedings of the KIEE Conference
• /
• 2007.10c
• /
• pp.157-159
• /
• 2007

For a vessel to safely navigate on the ocean, it is required to check the vessel position as frequently as possible. When a vessel navigates oil the ocean or entering/leaving a port, the target area such as islands, points and mountain peak, etc. are used. However, when such target are not available or when vessel navigates in night time, installed artificial navigation aid facilities help successful vessel navigation. Light Wave Aid helps to confirm a position to the navigator directly and quickly. So, the synchronous light to display the accurate signal has wide applications. However, lantern domestic industry is small, and most of the products show non-compatibility. Consequently, this paper presents the synchronous lighting using UTC of GPS, which maintains compatibility with different lanterns. Also, by replacing conventional electric bulb with LED lamp, simple and efficient lighting system is obtained.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2017.11a
• /
• pp.220-221
• /
• 2017

The initial light emitting diode (LED) has been used as a display device for various mechanical devices due to its low power. The development of LED technology has made it possible to express color with high power and high brightness. Therefore, it is used as a display such as a traffic signal, a large electric signboard, and an automobile display, and is also adapted as an indoor or outdoor light source such as an incandescent or a fluorescent lamp which requires the high luminance. The bulb of marine lantern, which is used for the aids to navigation, was replaced to LED. The first marine LED lantern was manufactured using multiple LEDs. However, if the optical design is renewed by the development of LED or even if a few LEDs are used, it is possible to satisfy the brightness and the light distribution required by the marine LED lantern.

• Journal of Applied Biological Chemistry
• /
• v.59 no.2
• /
• pp.99-102
• /
• 2016

The phototactic behavioral responses of Tribolium castaneum adults to light-emitting diodes (LEDs) of seven different wavelengths were determined under various conditions (light exposure times, light sources, and luminance intensities) and compared with those of a black light bulb (BLB) under laboratory conditions. Based on the attractive rate (%) of T. castaneum adults under optimal conditions (50 lx and an 48 h exposure time) in the dark, red LED ($625{\pm}10nm$) exhibited the highest potential attractive rate (97.8 %), followed by yellow ($590{\pm}5nm$, 68.9 %), green ($520{\pm}5nm$, 55.6 %), infrared (IR) (730 nm, 54.4 %), white (450-620 nm, 41.1 %), blue ($470{\pm}10nm$, 34.4 %), and ultraviolet (UV) (365 nm, 0.06 %) LEDs. In comparison, red LED (97.8 %) was approximately 3.4 times more attractive to T. castaneum adults than the BLB (28.9 %). These results indicate that a red LED trap could be useful to control T. castaneum adults.

• International Journal of Advanced Culture Technology
• /
• v.4 no.4
• /
• pp.6-12
• /
• 2016

Due to the development of technology, the modern people became to require not only more convenient life but also more comfortable and emotional environment, and individually suitable living environment is applied to residents in a residential space. Recently, while the LED lighting was variously attempted in every sector in society, it is needed to express differentiated lighting according to the resident's individual lifestyle in a residential space. In this paper, we analyze the role of LED lighting suitable for the digitalized lifestyle of the modern people through the relevant literature survey and case studies. The following results are obtained in summary of the rapidly changed recent trends of LED lighting. First, LED light replace existing light sources due to the advanced new technology in LED industry, and take the spotlight as a new lighting solution with the development of variable color LED bulb and the control technology by the wired and wireless communications. Second, LED lighting can be structurally applicable to every lighting device because of its compact and lightweight units, can produce abundant light environment by expression of variable colors and moods with the easy coloring and dimming control, can be reborn as emotional lighting design. Third, as recently practices are constantly appeared that integrate LED lights in the interior elements, such as object and furniture, and combine advanced LED lighting technology to new materials, the portion of illumination on the indoor environment is further increased after integrating the LED lighting and interior elements make boundaries of lighting and product architecture become blurred. LED lighting is confirmed that is being changed from the external functionality including material, shape, color, and etc. into the contextual emotion design including the lights expression, variable color, brightness control, making image, and etc. as the light source in current smart lighting era.