• Design & Manufacturing
• /
• 제14권2호
• /
• pp.42-48
• /
• 2020

This study is on the injection molding analysis for the LED outdoor lighting top cover of one heat sink body type structure. Thermoplastic and thermosetting resins were applied to compare the thermal properties during the injection molding process. The thermoplastic resin is used in this study due to special characteristics that it is light, good strength and dose long not transmute quality even if pass long time. The thermosetting resin is applied to this study due to good in strength, lightweight and excellent etc, thermal conductivity. This study presented a preliminary analysis of fill time, weld line, air trap etc. for the injection molding process of LED lamp cover and body through simulation using Moldflow. As a result of the study, it was selected HTM-102 material because the thermosetting resin has excellent strength and heat conductivity.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.348-350
• /
• 2006

Currently the indication method of the traffic signal light which is established in our country displays each "red, yellow, green" using the brightness LED signal light. In this paper, one LED circular arrangement replaces the Current indication method of the traffic signal light using two color LED. Also the blinking signal function of present time uses the MCU of AVR series and it is embodied with magnification and abridgment of the circular arrangement for recognizing easily far away. The signal light indication method which is proposed will be able to substitute the signal light of 3 colors with 1 signal light with economic profit presented the reform measure of energy efficiency improvement together.

• 대한임베디드공학회논문지
• /
• 제6권1호
• /
• pp.25-31
• /
• 2011

LEDs are becoming the most suitable candidate replacing traditional fluorescent street-light lamps because of its energy efficiency and high brightness. Furthermore, most countries are urging to pursue energy savings in conjunction with IT and sensor network. In order to conserve energy of LED lamp and ensure the safety of pedestrian, we propose a new smart control method for LED light system based on USN using compound sensors, such as illuminance, motion, temperature and humidity sensor. An elaborate simulation shows that the proposed system with a smart control based switching can reduce the energy by 40%, compared to the previous street-light system with a fixed time based switching.

• 조명전기설비학회논문지
• /
• 제20권1호
• /
• pp.1-6
• /
• 2006

반도체 광원(LED소자)을 이용한 새로운 해상용 등명기의 경우 기존의 해상용 등명기와는 발광 원리 및 발광 방식이 다르며, LED는 반도체 소자로서 외기 환경(온도)의 변화에 따른 그 특성이 변화하는 문제점을 내포하고 있어, 본 논문에서는 우리나라의 계절적 변화에 적응되고, 해양 환경 특성에 적합한 LED 등명기를 개발하여 현재 사용중인 등명기의 문제점을 해소하고 품질 개선, 시인효과 및 신뢰성 향상으로 이용자에게 양질의 서비스를 제공하고 선박의 안전운항에 기여하고자 하였다. 이를 위하여 기존 전구식 등명기의 기술기준, 고휘도 LED 광원을 이용한 고광도 등명기 광원 선계, 및 고휘도 LED 등명기의 실효광도 및 색도의 측정 분석시험에 대해 연구를 수행하였다.

• 한국인터넷방송통신학회논문지
• /
• 제11권4호
• /
• pp.203-207
• /
• 2011

LED(Lighting emitted diode)는 전기 에너지를 빛으로 변환하는 효율이 좋고 수명이 길어서 차세대 조명으로 관심 받고 있으며, 최근에 자동차의 후미등, 신호등, 실내등에 사용되고 있다. 부가적인 기능으로서 LED를 이용하여 데이터 정보를 조명과 동시에 전송하는 융합(Convergence) 기술에 대한 연구가 진행되고 있다. 본 논문에서는 실내 환경을 1mm 단위의 격자 형태로 분할하고 LED에서 출발한 광입자가 격자에 도달한 후에 반사되어 직선 운동을 하다가 포토다이오도(PD)에 도달하는 원리를 이용하여 LED 무선 채널의 특성을 연구한다.

• 한국전기전자재료학회논문지
• /
• 제29권11호
• /
• pp.729-735
• /
• 2016

It is highly important issue to use an energy efficiently for sustainable prosperity of mankind. From this point of view, using LED lighting can be a good alternative because it has a lot of advantages such as high efficiency, long life time and eco-friendly manufacturing process. That is the reason why using LED lighting has been encouraged worldwide. However, in situations that LED lighting is replacing traditional lighting quickly, the problem of the flicker of LED lighting has emerged as an important issue. Therefore, in foreign countries like US or Japan in order to ensure the reliability of LED lighting, study for flickering effects of the human body and test methods are have been actively conducted. But related research in domestic situation is an insufficient condition. In this study, a flicker characteristic was measured conventional lamps such as incandescent lamps or fluorescent lamp and 81 items of LED lightings which are distributed in domestic markets.

• 한국전기전자재료학회논문지
• /
• 제27권8호
• /
• pp.535-540
• /
• 2014

Because of the development of LED technology, products due to high output and compact, the material with high thermal conductivity has been developed. Now that heat radiating part of the LED lamp is currently used for die casting of aluminum. The development of aluminum with excellent thermal conductivity is required. In this study, we measured the thermal properties and compared them while we produced the alloy by changing the component of die casting aluminum. From this study, the thermal conductivity and thermal resistance of the developed alloy were superior to die casting aluminum.

• Journal of Applied Biological Chemistry
• /
• 제59권2호
• /
• pp.95-98
• /
• 2016

Phototactic behavioral responses of the Indian meal moth, Plodia interpunctella ($H{\ddot{u}}bner$), adults were determined to different light-emitting diodes (LEDs) of seven wavelengths, and their behavioral responses were compared to that using a commercial luring lamp (BLB) under laboratory conditions. Based on the attractive responses under optimal light conditions (60 lx luminance intensity and 30 min light exposure time), the green LED ($520{\pm}5nm$) showed the highest attractive rate ($520{\pm}5nm$, 52.2 %), followed by the blue LED ($470{\pm}10nm$, 33.9 %), the yellow LED ($590{\pm}5nm$, 32.2 %), BLB (28.9 %), UV LED (365 nm, 22.8 %), the red LED ($625{\pm}10nm$, 14.5 %), the white LED (450-620 nm, 10.6 %), and IR LED (730 nm, 9.5 %). In addition, the green LED to P. interpunctella adults was approximately 1.81 times more attractive than BLB. These results indicate that the green LED could be most useful for monitoring of P. interpunctella adults.

• 조명전기설비학회논문지
• /
• 제28권7호
• /
• pp.19-25
• /
• 2014

In the LED lighting applications, because LED packages are the origin of heat generation, there are thermal design problem on heat sinks. In the thermal design, it is important to consider the total volume and the total weight of heat sink simultaneously. In this study, an Al 6063 heat sink was optimized using Computational Fluid Dynamics(CFD) simulation tool for the cooling of 30W LED module, and then the cooling performance and the total weight of heat sinks with Al 6063 and Thermal Conductive Polycarbonate(TCP) were compared under the same conditions. As the result of simulation, an Al 6063 heat sink was optimized with 22 ea. of fins and 1.6 mm of fin thickness. LED Junction Temperature of the TCP Heat Sink was $5.6^{\circ}C$ higher, but total weight of it was 47 % less than the Al 6063.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2006년도 전력전자학술대회 논문집
• /
• pp.504-507
• /
• 2006

현재 LCD(Liquid Crystal Display)용 광원으로서 주로 냉음극 방전램프(CCFL : Cold Cathode Fluorescent Lamp)가 사용되고 있으며, 그 외 LED를 비롯해서 외부전극 방전램프(EEFL: External Electrode Fluorescent Lamp), 면광원(FFL : Flat Fluorescent Lamp), 전계 방출램프(FEL : Field Emission Lamp)등 다른 광원에 대한 적용도 활발히 진행되고 있다. 본 논문에서는 멀티램프 구동이 유리하여 인버터 개수를 줄일 수 있는 장점을 가지고 있는 EEFL을 사용하였으며, 변압기의 자체 손실을 줄이고 소형화가 가능하며, 높은 승압 비를 갖는 압전 변압기를 병렬로 연결하여 멀티램프 구동이 가능하도록 하였다. 최적의 EEFL 구동회로를 구성하기 위해서 Push-Pull 타입의 압전 인버터를 설계하였으며, 설계된 인버터 회로에 대한 시뮬레이션 분석을 수행하고, 향후 여러 형태의 구동 방법을 적용하므로 서 압전 변압기로도 대화면 멀티 램프 구동용 인버터의 제작이 가능함을 제시하였다.