• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.3
• /
• pp.349-355
• /
• 2013

Recent high oil price results in the development of energy saving technology such as LED lighting system. Street-lighting system using COH LED package can save energy because the heat dissipation through cupper base is better than conventional technology. Studies on manufacturing processes of lighting system are insufficient even though LED package design and its heat analysis have been studied. This study focuses on the problem and solution of manufacturing processes such as LED packaging process, optimized emission angle, and LED bar dimension for mechanical assembly. As a result, we established better manufacturing alternatives of LED packaging and street-lighting system with higher lighting efficiency of 84 lm/W, as well as good illumination intensity of 39.7 lux at 6 m from lighting source.

• Journal of Sensor Science and Technology
• /
• v.25 no.3
• /
• pp.189-195
• /
• 2016

In this paper, we newly introduce a visible light communication (VLC) repeater using the LED array in an LED lamp. The LED array is used for a light source in the repeater, which radiates light both for illumination and data transmission. A VLC repeater is made by adding some electronic circuits to the LED array including a photodetector, a demodulator, and a modulator. The repeater is installed on the ceiling of a room like a conventional LED lamp, receives the VLC signal from an arbitrary transmitter, recovers data, and radiates the signal to wide area in the room. We used a carrier frequency of 100 kHz for the uplink from a transmitter to the repeater, and 500 kHz for the downlink from the repeater to a receiver. The repeater is useful for increasing the transmission path to wide area over the obstacles that may exist between VLC transmitters and receivers.

• Korean Journal of Optics and Photonics
• /
• v.18 no.2
• /
• pp.111-116
• /
• 2007

A high power LED which is being used in many illumination applications as a new light source was simulated for its physical structure and then its optical properties were analyzed. To obtain accurate results from the designed LED model, properties of the die chip and reflector cup were varied. As a result, a high power LED model which has a radiation pattern of a Lambertian with its viewing angle of approximately $140^{\circ}$ and total included angle of $160^{\circ}$ was designed.

• Proceedings of the Optical Society of Korea Conference
• /
• 2006.02a
• /
• pp.371-372
• /
• 2006

A 10Mbps optical wireless link using LED array has been demonstrated. The modulation bandwidth of the LED has been measured, and the transmission test according to modulation frequency has been also carried out. The good communication performance has been obtained at about 30cm distance at 10Mbps data rate.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2006.05a
• /
• pp.160-163
• /
• 2006

In this paper present installation of LED lighting at Cheonggyecheon that represents the culture and a leisure of Seoul. The objective which presents this paper is n order to rises the creativity of spaces and the quality of life as establishes an illumination in other culture and living spaces.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.2
• /
• pp.199-208
• /
• 2009

This study was performed to improve the conventional $DIFOTI^{TM}$ system(EOS Inc., USA) by developing the prototype of DIFOTI system which consists of light emitting diode(LED) and digital camera. The images of enamel surfaces treated under Carbopol 907 de-mineralizing solution were taken daily during 7 days of experimental periods by both DIFOTI systems. The results of comparative analyses of obtained images can be summarized as follows: 1. Trans-illumination indices of images taken from sample enamel surfaces were decreased with time in both systems. 2. The difference of intensity of luminance between sound and de-mineralized enamel surface in prototype DIFOTI system was shown to be relatively smaller than conventional $DIFOTI^{TM}$ system. The application of LED light source in prototype DIFOTI system could possibly reduce the amount of current consumption and that could ultimately lead us to the successful development of wireless model with battery. The innovative development of digital camera is undoubtedly expected to create much clearer image despite of wireless transfer. LED and digital camera can be combined into a smaller size but a very important task of improving image manager and analyzing program into a simpler and easier one to manipulate has to be solved.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.3
• /
• pp.265-272
• /
• 2009

In this paper, a simple optical method that uses an infrared(IR) cut filter is proposed to minimize variation of eye image by external infrared(IR) sources in a video based head mounted eye tracking system that is used in the field of sports. For this, the IR cut filter is attached to a head mount of the eye tracking system, and the camera with an IR LED is located between the IR cut filter and eye. In this structure, external IR is blocked by the IR cut filter, and the IR intensity on the eye can be controlled by the IR LED. Therefore, the illumination condition of the camera to capture the eye can be stable without being affected by external IR illuminations. To verify the proposed idea, variation of the eye image and intensity of the IR with/without the IR cut filter is measured under various illumination conditions. The measured data show that the IR cut filter method can block external IR effectively, and complex pupil detection algorithms can be replaced by a simple binarized method.

• Current Optics and Photonics
• /
• v.2 no.6
• /
• pp.532-539
• /
• 2018

Multiple LED arrays can be utilized in visible-light communication (VLC) to improve communication efficiency, while maintaining smart illumination functionality through dimming control. This paper proposes a modulation scheme called "Spatial Intensity Modulation" (SIM), where the effective number of turned-on LEDs is employed for data modulation and dimming control in VLC systems. Unlike the conventional pulse-amplitude modulation (PAM), symbol intensity levels are not determined by the amplitude levels of a VLC signal from each LED, but by counting the number of turned-on LEDs, illuminating with a single amplitude level. Because the intensity of a SIM symbol and the target dimming level are determined solely in the spatial domain, the problems of conventional PAM-based VLC and related MIMO VLC schemes, such as unstable dimming control, non uniform illumination functionality, and burdens of channel prediction, can be solved. By varying the number and formation of turned-on LEDs around the target dimming level in time, the proposed SIM scheme guarantees homogeneous illumination over a target area. An analysis of the dimming capacity, which is the achievable communication rate under the target dimming level in VLC, is provided by deriving the turn-on probability to maximize the entropy of the SIM-based VLC system. In addition, a practical design of dimmable SIM scheme applying the multilevel inverse source coding (MISC) method is proposed. The simulation results under a range of parameters provide baseline data to verify the performance of the proposed dimmable SIM scheme and applications in real systems.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.953-956
• /
• 2009

We have investigated the effect of light on amorphous silicon thin film transistors based photo-sensor applications. We have analyzed the instability caused by electrical gate bias stresses under the light illumination and the effect of photo-induced quasi-annealing on the instability. Threshold voltage ($V_{TH}$) under the negative gate bias stress with light illumination was more decreased than that under the negative gate bias stress without light illumination even though $V_{TH}$ caused by the light-induced stress without negative gate bias was shifted positively. These results are because the increase of carrier density in a channel region caused by the light illumination has the enhanced effect on the instability caused by negative gate bias stress. The prolonged light illumination led to the recovery of shifted VTH caused by negative gate bias stress under the light illumination due to the recombination of trapped hole charges.

• Current Optics and Photonics
• /
• v.7 no.6
• /
• pp.755-760
• /
• 2023

In this paper, an illumination optical system that can mitigate the saturation phenomenon in the center of an image (caused by the typical flexible-endoscope illumination system using LEDs with Lambertian light distribution) is designed. When an LED with Lambertian light distribution is used as a light source, the amount of light in the center of the endoscopic illumination system is relatively high, compared to the periphery, causing saturation in the image. Since this phenomenon causes difficulty in detecting the patient's lesion, it is necessary to find a lighting-system design that can alleviate the saturation phenomenon. Therefore, in this paper a lighting system with bat-wing light distribution, which can lower the intensity at the center and secure the maximum amount of light at the maximum light distribution angle, is designed. In addition, to check the performance of the designed lighting system, a simulation of illumination and luminance is conducted for a system using a common aspherical lens with otherwise the same components. As a result, it is confirmed that the lighting system designed in this paper effectively reduces the luminance value at the center and secures more luminance values at the periphery than the familiar lighting system.