• 제목/요약/키워드: LED illumination

검색결과 359건 처리시간 0.024초

대화면 액정 화상 투영기용 다층 배열 엘이디 광원 및 조명광학계 설계 (Optical Design of a Multilayer LED Array Light Source and Illumination Optics for a Large-Screen LC Projection Display System)

  • 김현희;한동진;김진승
    • 한국광학회지
    • /
    • 제26권4호
    • /
    • pp.226-232
    • /
    • 2015
  • $8m{\times}6m$(400인치)의 대형 화면 액정 화상 투영기에 쓸 수 있는 광원부로서 엘이디를 2층으로 촘촘하게 배열한 광원과 그에 수반되는 조명광학계 설계의 개념을 제시하였다. 엘이디를 촘촘히 배열할 때 생기는 방열문제는 엘이디를 2층으로 배열하면 해결됨을 열분석을 통해 보였다. 뒤 층의 엘이디에서 나오는 빛이 앞 층에 가려질 수 있는 문제는 앞뒤로 어긋나게 배열하여 해결했고, 엘이디 배열에서 나온 빛을 투영렌즈에 맞추어 액정판을 고르게 비추는 조명광학계를 함께 설계하였다.

실내 가시광 통신 시스템에서 성능에 영향을 주는 요인에 관한 연구 (A Study About Fact Influence on Performance at Indoor Visible Light Communication)

  • 이창우;최덕재;김한필
    • 조명전기설비학회논문지
    • /
    • 제27권10호
    • /
    • pp.1-8
    • /
    • 2013
  • Wireless Visible Light Communication is the technology that enables communication using LED illumination Infrastructure instead of existing illumination such as incandescent lamp or fluorescent light. Because VLC uses light for communication, it has no problem of frequency permission and is harmless to human body. It is also possible to check the communication through eye. So VLC can be used as a supplement to the Radio Frequency communication, Infrared in indoor environment. So far, researchers on the LED Visible light communication have focused on the increasing transmission speed, transmission distance, modulation method. However, there is few research of main factors that influence on system performance. System performance has been mainly predicted through simulation. In this paper, I recognized that these factors such as outside light noise, obstacle, LED panel position or emitted angle have a great impact on wireless communication system. So I experimented VLC system by changing distance and position to discover location suitable for BER regulation.

Design and Implementation of Green Coastal Lighting System for Entrance to Coastal Pier

  • Jae-Kyung Lee;Jae-Hong Yim
    • 한국항해항만학회지
    • /
    • 제47권2호
    • /
    • pp.85-92
    • /
    • 2023
  • The hardware of an LED lighting control system for coastal lighting at coastal pier entrance consists of a power supply unit, an AVR control unit, a CLCD output unit, an LED control unit, a scenario selection switch unit, and an operation speed display unit. It is made of an 8-channel. The CPU used ATmega128 and the FET was used to control the current signal. To operate the CPU, DC 12V was converted to DC 5V using a regulator 7805. A heat sink was used to remove heat generated in the FET. By connecting the load LED module to the manufactured 8-channel LED lighting control system, the operation was confirmed through various production scenarios. In addition, a control system was designed to show the most suitable color for the atmosphere of the coastal pier according to the input value of temperature and illumination using a fuzzy control system. Computer simulation was then conducted. Results confirmed that fuzzy control did not need to store many data inputs due to characteristics of artificial intelligence and that it could efficiently represent many output values with simple fuzzy rules.

녹색성장 LED 융합 기술 동향 분석 (The Convergence Technology Analysis of Green Growth LED Illumination)

  • 강태규;박성희;장일순;김인수;한동원
    • 전자통신동향분석
    • /
    • 제24권5호
    • /
    • pp.30-37
    • /
    • 2009
  • LED는 빛을 내는 반도체이다. LED는 백열전등에 비하여 전기 절감 효과가 높고, 형광 등에 비하여 수은을 사용하지 않아 친환경적이기 때문에 녹색성장의 대표주자 중 하나이다. 메모리 반도체와 전자통신 기기가 융합하여 지난 20년간 발전하여 왔듯이, 앞으로는 LED와 전자통신이 융합하여 새로운 형태의 융합 기술이 발전할 것이다. 현재 예상 가능한 LED 전자통신 융합 기술은 LED 조명과 동시에 통신을 할 수 있는 가시광 무선통신 기술과 감성 및 전기 절감을 실현할 수 있는 LED 조명 모듈간 유선 네트워킹 기술이다. 본 고에서는 LED 조명과 녹색성장이 연계된 배경, 가시광 무선통신의 국내 및 국제 표준 동향, LED 조명 네트워킹 기술을 설명한다. LED 융합 기술에 의하여 인간중심의 편리 시설을 제공하면서도 전기 절감 및 저탄소를 실현할 수 있다.

비구면 광학계를 이용한 고출력 LED 스포트라이트에 관한 연구 (A Study on the LED Spotlight with a High Power using an Aspherical Optical System)

  • 문재일;유경선;현동훈
    • 한국생산제조학회지
    • /
    • 제21권3호
    • /
    • pp.487-492
    • /
    • 2012
  • In this study we researched a spotlight in LED lighting. Ordinary LED spotlight was manufactured with characterized property of traveling straightness of LED light source, but multiple use of shell type LED, a yellow band has formed caused by light source interference between the LED. Also, there was a high miscellaneous light efficiency with losing light source homogeneity and efficiency due to light source control uneasiness. The study uses aspheric reflector and aspheric lens, so we can control the light source of LED spotlight with effectively and we reached surface light source by using COB/COM for LED module. Furthermore it can change its use by a reduced scale of light system. It has been designed to make its various application from low power consumption of bicycle lamp, up to high power consumption of automobile lamps and lighthouse.

주광을 활용한 LED조명시스템의 컨트롤에 관한 실험적 연구 (An Experimental Study on Control Strategy of LED System Using Daylight)

  • 윤경;윤갑천;김강수
    • KIEAE Journal
    • /
    • 제10권6호
    • /
    • pp.33-39
    • /
    • 2010
  • Visual Environment and productivity are correlated. So we need to create a comfortable visual environment and maintain proper workplane illumination level. We can obtain lighting energy savings and comfortable visual environment using daylight and LED lights. In this study, we characterized the indoor illuminance level according to the sky condition and proposed dimming control strategy of LED lights. Energy savings in On/Off control mode are 40% at clear sky and 28% at intermediate sky. In dimming control mode, energy savings are 77.2% at clear sky and 64.1% at intermediate sky. Then we obtain the appropriate dimming control strategy of LED lights based on data. Dimming rates are 0-14.2-80(min-avg-max, %) for LED 1, 0-19.9-60% for LED 2 and 30-61.4-90% for LED 3. Lighting energy savings are 68.2% for LED dimming system applied this control method.

포르말린과 청색 LED 병용처리에 의한 항스쿠티카 효과 (Anti-scuticociliate effects of a combined treatment with formalin and blue LED)

  • 강문경;이주엽;이윤항;김도형
    • 한국어병학회지
    • /
    • 제35권1호
    • /
    • pp.113-120
    • /
    • 2022
  • Scuticociliatosis caused by Miamiensis avidus is a very important parasitic disease in olive flounder farming industry. The aim of this study was to determine effect of combined treatment with blue LED (light-emitting diode) illumination and formalin on olive flounder (Paralichthys olivaceus) infected with M. avidus. Different intensity of 405 nm LED (20, 40, and 60 μmol·m-2·s-1) was illuminated on 2.2×104 cells/well of M. avidus in a 24 well microplate for 24 h. Also, 2.4×104 cells/well of M. avidus were exposed to varying combinations of 60 μmol·m-2·s-1 of 405 nm LED and serial 10-fold dilutions of formalin (from 10 to 100 ppm) for 15, 30, 45, and 60 min. Surviving M. avidus were counted using a hemocytometer. For in vivo test, flounder acclimatized at 11-12 practical salinity unit (psu) were challenged with 2×106 cells/ml of M. avidus by immersion method for 1 h. Then, fish were moved and divided into four groups; "F" group, treated with formalin at 50 ppm; "L" group, treated with 60 μmol·m-2·s-1 of 405 nm LED; "C" group, treated with combination of the two methods; and the control group. After treatment for 30 min, fish were transferred to new tanks (salinity = 11-12 psu) and observed for 3 weeks. As a result, illumination of 405 nm LED at 60 μmol·m-2·s-1 killed 100% of M. avidus after 12 h, while 67% and 90% of the scuticociliate died at 20 and 40 μmol·m-2·s-1, respectively, after 24 h exposure. One hundred percent of M. avidus was killed at 90, 80, 80 and 70 ppm after exposure to formalin for 15, 30, 45 and 60 min, respectively. However, combined method (e.g., 60 μmol·m-2·s-1 of 405 nm-LED plus 50 ppm formalin) killed the parasite within 30 min. From in vivo test, similarly, survival rates of fish challenged with M. avidus were 100%, 43%, 29% and 0% in the C, F, L, and control groups, respectively. Results obtained in this study demonstrates that the combined treatment method has clear synergistic effect on scuticociliatosis in fish.

SOLAR-LED 시스템과 저탄소녹색동굴조명 (Low Carbon and Green Growth Cave Lightings with SOLAR-LED System)

  • 소대화;강상택;소현준
    • 동굴
    • /
    • 제95호
    • /
    • pp.15-21
    • /
    • 2009
  • 온실가스와 지구촌 온난화, 그리고 이를 치유하기 위한 인간의 노력과 필요한 대안기술은 마치 성난 자연을 잠재우기 위한 노력과 그에 필요한 재원을 동원하기보다도 더 어려운 일인가보다. 한정된 화석연료는 수십 년 내에 고갈될 수밖에 없으며, 국제무대에서 나라마다 자원을 확보하려는 외교활동의 치열함은 마치 자원 확보를 위한 전쟁을 방불케 하는 모습이다. 화석연료의 고갈은 친환경 녹색성장이라는 새로운 대안정책을 불러왔고, 태양에너지 활용을 위한 태양전지기술은 날로 발전을 거듭하고 있으며, 이와 함께 세상을 밝혀주기 위한 조명광기술은 석유등, 백열등으로부터 발광다이오드에 이르러 첨단 광역시장을 이루었다. 따라서 이들을 탄생시킨 반도체기술로부터 태양전지와 발광다이오드를 접목시켜 일체화시킨 SOLAR-LED 시스템과 함께 저탄소녹색조명의 동굴응용 기술을 조명한다.

Desktop-LED lighting for Eye Muscle Movement by Adjusting the Light Illuminance and Color Temperature

  • Kim, Byoung-Chul;Kim, Seon-Jong;Kim, Joo-Man
    • International journal of advanced smart convergence
    • /
    • 제9권4호
    • /
    • pp.203-208
    • /
    • 2020
  • In this paper, we propose the design and implementation of a desktop LED stand and smart app that automatically adjusts color temperature and illuminance for optimal brightness and eye health by improving the structural problem of the LED stand. It is a tabletop LED stand that supports optimal brightness through color temperature control and heat transfer through infrared LED to relieve eye strain through blood circulation and muscle movement. The LED stand works with the smartphone to automatically adjust the optimal brightness and color temperature for the user's environment. In addition, the brightness of the infrared LED is adjusted to a living frequency of 4Hz to relax the eye muscles and reduce eye strain. This study implemented an effective measured data-based system of previous studies through the color temperature and illumination of LED lighting, and near-infrared rays, and presented meaningful results by conducting an experiment to prove the effect through subjects.

COH형 LED 패키지를 이용한 가로등 생산공정에 관한 연구 (A Study on Manufacturing Processes of Street-lighting System using COH LED Package)

  • 이종항;양근주
    • 한국정밀공학회지
    • /
    • 제30권3호
    • /
    • pp.349-355
    • /
    • 2013
  • Recent high oil price results in the development of energy saving technology such as LED lighting system. Street-lighting system using COH LED package can save energy because the heat dissipation through cupper base is better than conventional technology. Studies on manufacturing processes of lighting system are insufficient even though LED package design and its heat analysis have been studied. This study focuses on the problem and solution of manufacturing processes such as LED packaging process, optimized emission angle, and LED bar dimension for mechanical assembly. As a result, we established better manufacturing alternatives of LED packaging and street-lighting system with higher lighting efficiency of 84 lm/W, as well as good illumination intensity of 39.7 lux at 6 m from lighting source.