• 제목/요약/키워드: LED communication

검색결과 1,155건 처리시간 0.023초

퍼지 추론을 이용한 실내 운동 및 휴식 상황에서의 LED 감성조명 설계 (Design of a LED Emotional Lighting System for Indoor Exercise and Resting Situations using Fuzzy Inference)

  • 강은영;김효준;박건준;김용갑
    • 한국인터넷방송통신학회논문지
    • /
    • 제15권2호
    • /
    • pp.181-187
    • /
    • 2015
  • 본 논문은 LED 조명을 이용한 실내 환경에서 사용자가 운동 및 휴식을 취할 때 퍼지 추론을 통하여 상황에 최적화된 LED 감성조명 알고리즘을 구현한다. 기존의 단순 색온도 제어보다 퍼지이론을 사용하여 복잡한 조건하에서 색상과 색온도를 사용자 환경에 맞게 LED 광원을 컨트롤 한다. 사용자의 행동에 따라 감성언어의 색상과 온도에 따른 색상의 배합을 통한 퍼지 추론 기반의 LED 감성조명 시스템을 설계한다. 그 결과 색상과 색온도가 사용자의 감성에 좋은 영향을 주어서 휴식 및 운동에 효과적인 감성조명을 나타낼 수 있을 것이다.

칼라 CCD 영상을 이용한 고휘도 LED 전구의 빔 열화 분석 (Analysis of High Luminance LED Beam Degradation using Color CCD Image)

  • 조재완;최영수;이재철;구인수;홍석붕
    • 제어로봇시스템학회논문지
    • /
    • 제16권6호
    • /
    • pp.586-591
    • /
    • 2010
  • VLC (Visible Light Communication) is a wireless communication method using light that is visible to the human eye. It has a major advantage that it causes no interference to RF-based devices. This makes wireless communication possible in RF hazardous areas such as nuclear facilities. In order to apply VLC communication in harsh environment of nuclear power plant, the high luminance LEDs, which are key components of the VLC communication, have been gamma-ray irradiated at the dose rate of 4kGy/h during 72 hours up to a total dose of 288 kGy. The radiation induced color-center was formed in the LED housing cap made of transparent plastic or acryl material. The beam degradations of high luminance LEDs by high dose-rate gammaray irradiation are analyzed using color CCD image processing technology.

LED 조명통신용 드라이빙기술 기반 VLC 송수신기 모듈의 외란광 분석에 관한 연구 (A Study on Analysis of Disturbance in VLC Transceiver Module Based on LED Communication)

  • 홍근빈;장태수;김태형;김용갑
    • 전기학회논문지
    • /
    • 제60권7호
    • /
    • pp.1391-1395
    • /
    • 2011
  • In this paper, would implement a transceiver for the visible light communication that based on wireless communication driving technology for LED illumination-based infrared ray communication, and measurement analyzed a design error rate of a transceiver variable rate has made about distance change -2.5m. The error rate measured a voltage variable along illuminate change between switchable circumstances, which has illuminated insight and outright. Each analyzed and measurement on the communication distance errors along the differences of disturbance light between night and days. The LED module has implemented for number of 6 through illumination dimming in case of different values. Also, implementation for the system module of a VLC transceiver based on the infrared sensors which used feedback outcome value has analyzed with error rate.

조명용 LED의 스위칭 구동 회로로 변조되는 가시광 통신 시스템의 구현 (Implementation of Visible Light Communication System Modulated by a Switching Driver Circuit of Lighting LED)

  • 조상호;한상규;노정욱;홍성수;장병준
    • 한국전자파학회논문지
    • /
    • 제21권8호
    • /
    • pp.905-910
    • /
    • 2010
  • 본 논문에서는 조명용 LED(Light Emitting Diode)의 스위칭 구동 회로를 이용한 변조 기법으로 조명 기능과 무선 통신 기능을 동시에 수행하는 가시광 통신(VLC: Visible Light Communication) 시스템을 제안하였다. 본 방식은 기존의 선형 영역에서 동작하는 LED 구동 회로를 갖는 가시광 통신 시스템에 비해 고효율이므로 고출력의 조명용 LED 시스템에 적용할 수 있는 장점이 있다. 제안된 시스템의 유용성을 입증하기 위하여 디지틀 방식의 오디오 시스템을 채용하여 가시광 통신 시스템을 구현하고, 그 실험 결과를 제시함으로써 제안된 방식의 우수성을 검증하였다. 실험 결과, 제안 회로의 시작품은 특별한 광필터 없이 20 W급 조명을 사용해서 약 1.5 m의 반경에서 최대 10 Mbps의 데이터 전송률을 달성하였다.

BPSK-OFDM 기반 LED 통신 시스템을 위한 워터마킹 데이터 전송 기법 연구 (A Study of Watermarking Data Transmission Scheme for BPSK-OFDM Based LED Communication System)

  • 이승호;이정훈;차재상
    • 한국통신학회논문지
    • /
    • 제36권10B호
    • /
    • pp.1246-1251
    • /
    • 2011
  • 본 논문에서는 BPSK-OFDM 기반의 LED 풍산 시스템에 워터마킹 기법을 적용하여, LED 통신 데이터의 전송과 동시에 부가 정보 데이터를 함께 전송하는 방법에 대해서 연구하였다. 워터마킹을 위해서 카사미(Kasami) 코드를 확산 코드로 사용하였으며, 확산된 부가 데이터는 BPSK-OFDM 광 신호에 영향을 주지 않는 작은 신호 레벨로 조절되어 BPSK-OFDM 광 신호에 더해져서 전송된다. 카사미 코드의 확산 코드로서의 성능은 무잡음 환경의 자기 상관, 잡음 환경 하의 자기 상관을 통하여 확인하였다. 또한 모의실험을 통하여 제안한 기법이 적용된 BPSK-OFDM 기반 LED 통신 시스템에서 부가 데이터의 신호 크기 레벨에 따른 BPSK-OFDM 통신 시스템의 BER(Bit error rate) 성능 및 워터마킹 신호의 레벨에 따른 부가 데이터의 DER(Detection Error Rate) 성능을 분석하였고, 이를 통하여 제안된 워터마킹 시스템이 부가 데이터 전송을 위한 기법으로 유용함을 확인하였다.

OFDM을 사용하는 무선 가시 광통신에서의 PAPR 저감 기법과 BER성능 개선 (PAPR Reduction Technique and BER Performance Improvement in OFDM-based Wireless Visible Light Communication)

  • 유상범;유흥균
    • 한국통신학회논문지
    • /
    • 제36권3A호
    • /
    • pp.189-197
    • /
    • 2011
  • 무선 광 통신 시스템에서 고속의 데이터를 전송하기 위한 방법으로 대역 효율이 높은 OFDM(orthogonal frequency division multiplexing) 시스템이 연구되고 있다. OFDM 시스템은 PAPR(peak to average power ratio)이 높고 비선형 에러와 디바이스의 불균형으로 발생하는 ICI(inter channel interference)가 발생한다. 무선 광통신 시스템에서 LED(light emission diode)의 구동 전류에 의하여 구동되는 광 출력 파워는 비선형이며 전송 신호는 왜곡된다. 그러므로 비선형 LED 전달함수와 OFDM 신호에 의한 방사된 광 출력의 수신 성능에 대한 연구가 진행되었다. 비선형 왜곡에 의해 발생하는 효과는 기존의 무선 통신에서 사용되는 OFDM의 비선형 특성과 다르며 BER 성능을 저감시킨다. 본 연구에서는 최근 연구된 LED의 비선형성 전달함수를 적용하며, 비선형 왜곡과 Back-off에 의하여 수신기의 주파수영역에서 진폭 감쇄와 ICI를 발생시키므로, BER 성능을 개선시키기 위한 방법을 제안한다. 먼저 LED의 비선형 왜곡을 감소시키기 위한 새로운 PAPR저감 기법을 제안하며, 또한 수산 성능을 향상시키기 위하여 적응형 채널 추정 방식과 전송된 신호를 사용하여 SNR(signal to power ratio)을 개선하여 BER(bit error rate)을 개선하였다. 제안된 방법들을 시뮬레이션 결과를 통하여 확인한다.

LED 광원 크기에 따른 자유 형상 렌즈의 조명 성능 변화와 공차 특성 (Variation of Illumination Performance with Source Size and Tolerance Characteristics of Freeform LED Lenses)

  • 양재석;김대찬;오범환;박세근;유일현;이승걸
    • 한국광학회지
    • /
    • 제24권1호
    • /
    • pp.29-38
    • /
    • 2013
  • 본 논문에서는 점광원을 기준으로 설계된 자유 형상 렌즈(freeform lens)의 조명 성능과 LED 광원 크기와의 관계 및 공차 특성을 살펴보았다. 비교를 위해 발산 조명 모델(divergent illumination model)을 적용한 두 가지 렌즈와 중첩 조명 모델(overlapped illumination model)을 적용한 한가지 렌즈를 설계하였다. LED 광원이 커짐에 따라 평균 조도에 비해 조도 균일도가 상대적으로 크게 감소하였으며, 정렬 오차에 의한 성능 저하는 거의 발생하지 않았다. 하지만 LED 광원의 방출 특성 변화는 LED 광원 크기에 관계없이 조명 성능에 영향을 미치는 것으로 확인하였다. 발산 조명 모델로 설계된 렌즈가 전반적으로 우수한 성능을 보였지만, LED 방출 특성 변화에 대해서는 중첩 조명 모델로 설계된 렌즈의 성능이 상대적으로 적게 변화함을 알 수 있었다.

가시광통신 시스템에서 하이브리드 전송기법을 이용한 BER 성능향상 기법에 대한 연구 (A Study on the BER Performance Improvement Method Using Hybrid Transmission Techniques in Visible Light Communication System)

  • 이규진
    • 산업융합연구
    • /
    • 제22권2호
    • /
    • pp.55-62
    • /
    • 2024
  • 가시광을 이용하여 정보를 전송하는 가시광통신은 초고속, 초지연, 초연결등의 장점이 있어 6G 통신을 보완하기 위한 하나의 방안으로 연구가 진행되고 있다. 본 논문에서는 가시광통신에서 RGB 혼합비율에 의하여 발생하는 성능 열화를 극복하기 위한 연구를 진행하였다. LED 조명을 이용한 가시광통신 시스템은 조명의 역할이 중요한 기능으로 통신을 위해 사용할 경우 RGB 혼합 비율에 따른 성능 차이는 필연적으로 발생한다. 특히, 일정 기준 이하의 빛의 강도를 갖는 경우 시스템 전체의 성능을 열화시키는 문제가 발생한다. 이 연구에서는 RGB 3개의 채널 중 혼합 비율의 차이로 발생하는 통신 시스템에서 일정 성능 이하가 발생할 때, 최고의 성능을 보이는 LED를 제외하고 나머지 2개의 신호를 STBC(Space-Time Block Coding)으로 전송하여 통신의 품질을 보장하는 하이브리드 시스템에 대해서 연구를 진행하였다. 제안 시스템의 성능을 검증하기 위하여 컴퓨터 시뮬레이션을 수행하였고, 제안 시스템의 성능이 기존 시스템과 비교하여 향상된 것을 볼 수 있다.

고 선량 감마선 조사에 따른 고휘도 LED의 가시광 무선 데이터 전송 (VLC Wireless Data Transmission of High Luminance LED Irradiated by the High Dose-Rate Gamma-Ray)

  • 조재완;최영수;홍석붕
    • 전기학회논문지
    • /
    • 제59권5호
    • /
    • pp.996-1000
    • /
    • 2010
  • In order to apply VLC (visible light communication) in harsh environment of nuclear power plant in-containment building, the high luminance LEDs, which are key components of the VLC system, have been gamma irradiated at the dose rate of 4 kGy/h during 72 hours up to a total dose of 288 kGy. The radiation induced coloration effect in the high luminance LED bulb made of acryl or plastic material was observed. In the VLC wireless data transmission experiment using the high luminance LEDs irradiated by high dose rate gamma-ray, the radiation induced coloration effect of the high luminance LED bulb extended the communication distance compared to non-irradiated LEDs.

An Indoor Broadcasting System Using Light-Emitting Diode Lamps Coupled with Power Line

  • Lee, Seong-Ho
    • 센서학회지
    • /
    • 제24권5호
    • /
    • pp.342-347
    • /
    • 2015
  • We introduce an indoor broadcasting system using light-emitting diode (LED) lamps coupled with a 220 V power line. Two couplers connected to the power line constitute a power line communication (PLC) link. The transmission path from an LED lamp to a photodetector forms a visible light communication (VLC) link in free space. When the LED lamp is coupled to the power line, a composite PLC-VLC link is formed, making it possible to transmit a VLC signal beyond line-of-sight. In experiments, a 4 kHz analog signal modulated with a 100 kHz carrier was sent to the power line by a PLC coupler, and LED lamps coupled to the power line detected the signal and radiated it to multiple VLC receivers in the room. This configuration is useful in expanding an indoor VLC sensor network to adjacent rooms or constructing a voice broadcasting system in a building or apartments with existing power lines.