• Journal of the Korean Solar Energy Society
• /
• v.31 no.2
• /
• pp.31-36
• /
• 2011

LED is expected as an environmentally friendly next generation light source with its good reliability and long lifetime. The light sources for illumination have a variety of applications in the indoor and outdoor, and the variation of optical power and color rendering of the light source limits their applications. Therefore, it is necessary to research the LED lamp and its luminaire to minimize the variation of dynamic characteristics and to improve the color rendering due to that illuminating environment. Daylight is very good light source to human and can be used as primary or a secondary light source with benefits of energy, productivity and health.This paper presents the design method of LED lighting system to improve poor property in terms of CR(color redering) characteristic to use daylight effectively.

• Journal of the Semiconductor & Display Technology
• /
• v.16 no.4
• /
• pp.11-15
• /
• 2017

Red phosphors, $Sr_2Si_5N_8:Eu^{2+}$, were synthesized as a single-phase crystal structure by optimizing carbon and $Eu^{2+}$ contents in a carbothermal reduction nitridation method. With increasing $Eu^{2+}$ contents, the photoluminescence spectra were red-shifted from 600 nm peak for 1 mol% for to 700 nm for 7 mol%. It was suggested that this red shift is attributed to the energy transfer from one low-energy sited $Eu^{2+}$ (1) to other high-energy sited $Eu^{2+}$ (2). Finally, the best red sample (620 nm emission peak and 80 nm half width for 3 mole% of $Eu^{2+}$) was packaged on a Blue LED together with two additional green and yellow phosphors, the fabricated White LED showed a high color-rendering index of 90 and white color coordinates of x= 0.321 and y = 0.305.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.6
• /
• pp.586-591
• /
• 2010

VLC (Visible Light Communication) is a wireless communication method using light that is visible to the human eye. It has a major advantage that it causes no interference to RF-based devices. This makes wireless communication possible in RF hazardous areas such as nuclear facilities. In order to apply VLC communication in harsh environment of nuclear power plant, the high luminance LEDs, which are key components of the VLC communication, have been gamma-ray irradiated at the dose rate of 4kGy/h during 72 hours up to a total dose of 288 kGy. The radiation induced color-center was formed in the LED housing cap made of transparent plastic or acryl material. The beam degradations of high luminance LEDs by high dose-rate gammaray irradiation are analyzed using color CCD image processing technology.

• Proceedings of the KIEE Conference
• /
• 2008.10c
• /
• pp.120-122
• /
• 2008

This paper presents a color control algorithm for LED lights with independently changable illuminance. The proposed algorithm adjusts the light intensity to obtain a desired color with alterable illuminance To verify the validity of the proposed algorithm, it was applied to control of a RGBW LED module. The achieved color temperature range of the module was from 3000K to 7500K, and the illumination one was from 500 lux to 1500 lux.

• Science of Emotion and Sensibility
• /
• v.17 no.3
• /
• pp.29-38
• /
• 2014

The purpose of this study was to verify human physiological responses to emotional lighting system using LED (light emitting diode) flat lighting. Subjects were ten males in their twenties without medical history to eyes. Colors of LED lighting are red, orange, yellow, green, blue, purple and colorless (white). They were stimulated by LED lighting for 5 minutes. We measured body temperature, heart rate variability (HRV) and electroencephalogram (EEG) before and after color stimulus. In case of EEG analysis, relative power ${\alpha}$ wave ratio decreased in the groups of colorless, red and orange color light. Also, sympathetic nerve was more activated than parasympathetic nerve and the body temperature was increased in the groups of colorless, red, orange, yellow color light. On the other hand, relative power ${\alpha}$ wave ratio increased and parasympathetic nerve was more activated than sympathetic nerve and the body temperature was decreased in the groups of green, blue and purple color light. The results imply that the LED color lighting system in the realistic experiment environment. In the future, studies with compounded both colors and modes according to situation or auditory as nature sound or olfactory as aroma will be required.

• Restorative Dentistry and Endodontics
• /
• v.36 no.2
• /
• pp.108-113
• /
• 2011

Objectives: To determine the effect of the spectral output of single and dual-peak light emitting diode (LED) curing lights on the microhardness and color stability of commercial resin composites formulated with camphorquinone and alternative photoinitiators in combination. Materials and Methods: Three light-polymerized resin composites (Z100 (3M ESPE), Tetric Ceram (Ivoclar Vivadent) and Aelite LS Posterior (Bisco)) with different photoinitiator systems were used. The resin composites were packed into a Teflon mold (8 mm diameter and 2 mm thickness) on a cover glass. After packing the composites, they were light cured with single-peak and dual-peak LEDs. The Knoop microhardness (KHN) and color difference (${\Delta}E$) for 30 days were measured. The data was analyzed statistically using a student's t-test (p < 0.05). Results: All resin composites showed improved microhardness when a third-generation dual-peak LED light was used. The color stability was also higher for all resin composites with dual-peak LEDs. However, there was a significant difference only for Aelite LS Posterior. Conclusions: The dual-peak LEDs have a beneficial effect on the microhardness and color stability of resin composites formulated with a combination of camphorquinone and alternative photoinitiators.

• Proceedings of the Optical Society of Korea Conference
• /
• 2007.07a
• /
• pp.323-324
• /
• 2007

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.51 no.2
• /
• pp.179-187
• /
• 2015

Experiments designed to measure the effect of LED (light-emitting diode) light wavelength on the growth of fingerling rockfishes (Sebastes inermis) were conducted. Fingerling rockfishes (average body weight of individual: 1.13g) were divided into two groups by wavelength of the LED light [light power: 1,620 mW; wavelength: 518 nm (green color), 622 nm (red color)]. Triplicate groups of 180 individuals were reared over 7 weeks. Lighting duration was 14 hours from 06:00 to 20:00. A water tank exposed on the natural light in a room through the windows was used as a control. At results of the first experiment [initial average body weight (BW) of individual: 1.13 g; standard deviation (SD): 0.13 g], the final individual BW exposed on the green color was increased 0.39 g than the red color, and decreased 0.12 g than the natural light in the room. At results of the second (initial individual BW: 5.07 g; SD: 0.70 g) and the third experiment (initial individual BW: 10.67 g; SD: 0.67 g), the final individual BW exposed on the green color was increased 1.07 g and 2.55 g than the red color, respectively, and increased 0.57 g and 0.84 g than the natural light, respectively. The relative growth rate of the green color was higher about 8% significantly (p<0.05) than the natural light. In the case of the red color the relative growth rate was lower significantly (p<0.05) than the natural light.

• Journal of the Korean Vacuum Society
• /
• v.12 no.4
• /
• pp.235-238
• /
• 2003

Conventional LED displays use pixels which consist of red, green and blue LEDs of different operation voltages and degradation characteristics. Thus, the circuits are complicated and the display of each color changes independently with the operated time. In order to solve these drawbacks, an LED chip of a short wavelength and an LED lamp with the mixture of red, green, blue fluorescencers and epoxy on the LED chip were studied. The fluorescencers are excited by the light of the LED chip. The LED chip has an active layer of InGaN, a peak wavelength of 408 nm, a FWHM of 13 nm and the CIE index of (0.198, 0.087). White LED lamps were obtained and the CIE index change was observed with the change of the epoxy amount added to the fluorescencers.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1499-1500
• /
• 2008

최근에 LCD의 후면광원으로 LED를 채용하는 경우가 증가하고 있다. 이러한 LED를 Back Light으로 사용할 경우 일정한 휘도의 유지와 색좌표의 보정은 고급제품의 경우 채용이 증가하고 있다. 본 연구에서는 LCD Monitor용 LED BLU의 CMS(Color Management System)을 개발하기 위하여 1.5W R,G,G,,B가 하나의 PKG에 들어있는 LED를 이용하여 Direct type의 Back Light Unit을 개발하였다. 방열 및 휘도 균일도를 고려하여 LED part를 설계, 개발하였고 LED를 PWM으로 구동하기 위하여 Switching circuit이 포함되는 구동회로 부분을 설계, 개발 하였다. 또한 Color Sensor와 CMS IC를 사용하여 Color를 Control하고 휘도도 컨트롤하는 제어회로 부분도 개발을 하였다. CMS 기능의 제어회로 부분을 개발하기 위하여 MicroController를 사용하였으며 CMS IC와의 통신을 위한 부분도 개발하였다. 이러한 구성을 개발하여 시제품을 직접 제작하였다. 평가를 위하여 성능시험을 실시하였고 광학적인 평가도 시행하였다. 제작된 시제품은 L558 x W359 x H30 으로 하였다. 휘도는 목표휘도를 이루었으며 균일도는 85% 이상이 되었다.