• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.1291-1296
• /
• 2005

In this paper, we prevent a display quality drop for image of characteristics brightness ununiformity depend on LED use to LED vision. It is about that method also a control system development equipped with brightness compensation function of LED vision which is done easily for LED set up of LED vision. Generally, It is calculate driving current value is attended by each brightness to brightness characteristics mathematical function establish by "Y=aX+b", When is doing brightness value for "Y", driving current value for "X", brightness compensation value by using time for "b", characteristics value for "a" ground with characteristics curve of LED. So much, First It is create brightness data of each pixel take a photograph red, green and blue of LED vision. Second It is get average error about each pixel which get average brightness value of entire. Last, It is handle a complicated for about gradationally regulation to color and brightness of image send to LED vision. Also It raise the whole average brightness value of vision adjust for "b" value to solve brightness drop problem of LED using the long time.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 학술대회지
• /
• pp.836-841
• /
• 2004

This paper describes ASIC design for brightness revision control, A LED Pixel Matrix (LPM) design and LPM in natural color LED vision. A designed chip has 256 levels of gradation correspond to each Red, Green, Blue LED pixel respectively, which have received 8bit image data. In order to maintain color uniformity by reducing the original rank error of LED, we adjusted the specific character value 'a' and brightness revision value 'b' to pixel unit, module unit and LED vision respectively by brightness characteristic function with 'Y=aX+b'. In this paper, if designed custom chip and brightness revision control method are applied to manufacturing of natural color LED vision, we can obtain good quality of image. Furthermore, it may decrease the cost for manufacturing LED vision or installing the plants.

• 한국전기전자재료학회논문지
• /
• 제19권12호
• /
• pp.1149-1153
• /
• 2006

We developed the equipment palpating cell proliferation using a high brightness LED. This equipment was fabricated using a micro-controller and a high brightness LED, and designed to enable us to control light irradiation time, intensity, frequency and so on. Especially, to control the light irradiation frequency, FPGA was used, and to control the change of output value, TLC5941 was used. Control stage is divided into 30 levels by program. Consequently, the current value could be controlled by the change of level in Continue Wave(CW) and Pulse Width Modulation(PWM), and the output of a high brightness LED could be controlled stage by stage.

• 전력전자학회논문지
• /
• 제19권4호
• /
• pp.320-326
• /
• 2014

In this paper, the new smart dimming algorithm which is mixed with PWM and PAM control method is proposed for reducing the power consumption of LED TV Backlight. The proposed technique is using the curve characteristics of LED forward voltage and current which is proportionally changing LED forward voltage as changing LED forward current. Therefore, each PWM and PAM control method has different LED forward voltage and current in the same brightness condition. The PWM control method adjusts the brightness of LED TV Backlight by only varying the duty ratio of PWM and constantly sustaining the amplitude of LED forward current and voltage. So, the level of LED forward current and voltage in the PWM control method is relatively high and constant regardless of duty ratio of PWM. On the other hand, the PAM control method adjusts the brightness of LED TV Backlight by directly varying the level of LED forward current. So, the level of LED forward current and voltage in the PAM control method is lowered according to the brightness level. For the above-mentioned reason, the PAM control method has the advantage of reducing the total power consumption of LED TV Backlight at the brightness condition of below 100%, compared with PWM control method. By implementing this characteristic to LED driver circuit with control algorithm in MCU, the power consumption of LED TV Backlight can expect to be reduced. The effectiveness of the proposed method, new smart dimming algorithm, CPWAM(=Conditional Pulse Width Amplitude Modulation), has been verified by experimental results.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2011년도 추계학술대회
• /
• pp.440-443
• /
• 2011

본 논문은 LED 조명 환경에서 LED 조명 제어보드를 구성하고자 하였다. LED 조명 제어보드는 주변 밝기의 변화에 따라 LED 조명의 밝기를 제어하도록 하였으며, 본 논문에서 구성된 LED 조명 제어보드는 8bit 마이크로컨트롤러인 ATmega128을 사용하여 제어 하도록 구성 하였다. LED 제어는 주변 밝기에 따른 CdS 출력값을 입력받아 ADC값을 결정하며, 결정된 ADC값은 LED 드라이버로 입력할 PWM 파형을 결정하게 된다. 이렇게 결정된 PWM 파형에 의해서 LED 조명의 밝기 제어가 가능하도록 하였다.

• 융합정보논문지
• /
• 제11권12호
• /
• pp.90-96
• /
• 2021

본 논문에서는 밝기제어장치 및 색상제어장치 그리고 기존의 제어장치와의 호환성을 갖는 통합 인터페이스 제어장치 설계하고 제작하여 구현하였다. 구현 방법으로는 데이터 전송방식은 DVI/HDMI 전송방식의 규격을 적용하였으며 적용한 IC는 Sil1169 IC를 사용하였다. 밝기제어는 AT89C2051을 사용하여 8단계의 밝기조절 기능을 갖도록 프로그래밍하였다. 또한 영상 및 디밍 데이터 처리를 위하여 EPM240T100C5 IC를 사용하여 제작하였다. 그 결과로 기존에 제작하여 사용되어지고 있는 DVI/HDMI 전송방식을 적용한 제어장치와 호환이 가능하고, 주변 밝기에 따라 선명하고 고품질의 Full HD급 영상을 LED 디스플레이 장치에 통하여 재생할 수 있는 결과를 얻었다.

• 한국전자통신학회논문지
• /
• 제10권5호
• /
• pp.579-586
• /
• 2015

본 논문에서는 색상과 밝기가 조절 가능한 LED 조명 기기를 설계하고 구현하였다. 본 조명 기기는 RGB와 백색 LED로 구성되고 마이크로 컨트롤러에 의해 구동된다. 4색 LED를 사용하여 자연계의 거의 모든 색상을 조명 시스템 내에서 표현하도록 하였다. 조명기구의 수명 연장을 위해 LED를 흐르는 전류는 최대값을 넘지 않도록 PWM을 이용한 전류 제어를 실시하였다. 또한 사용자가 미리 설정한 여러 개의 색상과 밝기정보를 저장하고 다시 불러올 수 있는 기능을 탑재하여 사용자가 손쉽게 원하는 조명을 설정하여 사용하도록 하였다. 구현된 조명시스템은 전자기적합성 검사 등을 통과하였으며 실제 조명기구 제품으로 사용가능하다.

• 전기학회논문지
• /
• 제65권1호
• /
• pp.158-164
• /
• 2016

That's the reason why LED lighting has to employ AC power inlet. However, LED is a kind of diode, semiconductor, it's driven by DC power. With whis reason all of LED lighting should have AC/DC converter in its systems. This converter causes energy loss, it's the target for lesson the energy loss. To reduce this energy loss, DC power distribution structure can be used. LED lighting system using LVDC is a kind of DC power distribution structure, but LVDC has severe voltage drop which makes non-uniform brightness in lighting system. In this paper, we suggest a novel structure for the uniform brightness in LVDC LED lighting system using IoT based network system. The constructed test-bed system of suggested structure shows this structure can con control the brightness with uniformity.

• 조명전기설비학회논문지
• /
• 제27권12호
• /
• pp.44-53
• /
• 2013

This study has attempted to investigate how subjects perceive changes of brightness and their visual comfort according to daylight responsive LED(Light Emitting Diode) dimming systems in the office with venetian blind. Two studies was conducted. First study is that how subjects perceive changes of brightness and their visual comfort depending on angle control method of the venetian blind while the workplane illuminance level is being maintained through daylight responsive LED dimming system. Second study is that how subjects perceive changes of brightness and their visual comfort depending on the amount of daylight penetrated into the building while the illuminance level is being maintained through daylight responsive LED dimming system. The results of this study could be proposed as basic data in the control of the venetian blind and LED lighting in consideration of their perception on changes of brightness and visual comfort.

• 조명전기설비학회논문지
• /
• 제26권9호
• /
• pp.8-17
• /
• 2012

This paper proposes high performance control of light emitting diode(LED) drive system for liquid crystal display(LCD) backlight. The CCFL(cold cathode fluorescent lamp)was used to a conventional LCD backlight. Due to improvement on luminous efficiency, long life and wide color gamut, LED has gradually substituted for CCFL as backlight. The backlight using LED is necessary to use many LED. For that reason, the LED backlight is using a lot of LED driving circuits. The many LED driving circuit is generated a current deviation between LED. Eventually, it is caused brightness deviation between LED. Therefore, this paper improves the current deviation using transformer and balancing capacitor to solve this problem. Also, for accurate and uniform brightness control, this paper is applied the artificial intelligent control to a dimming control. This paper is compared with conventional system, and validity of this paper proves through that result.