• Journal of Power Electronics
• /
• 제15권2호
• /
• pp.555-566
• /
• 2015

A TRIAC dimming LED driver that can control the brightness of LED arrays for a wide range of source voltage variations is proposed in this paper. Unlike conventional PWM LED drivers, the proposed LED driver adopts a TRIAC switch, which inherently guarantees zero current switching and has been proven to be quite reliable over its long lifetime. Unlike previous TRIAC type LED drivers, the proposed LED driver is composed of an LC input filter and a variable switched capacitance, which is modulated by the TRIAC turn-on timing. Thus, the LED power regulation and dimming control, which are done by a volume resistor in the same way as the conventional TRIAC dimmers, can be simultaneously performed by the TRIAC control circuit. Because the proposed LED driver has high efficiency and a long lifetime with a high power factor (PF) and low total harmonic distortion (THD) characteristics, it is quite adequate for industrial lighting applications such as streets, factories, parking garages, and emergency stairs. A simple step-down capacitive power supply circuit composed of passive components only is also proposed, which is quite useful for providing DC power from an AC source without a bulky and heavy transformer. A prototype 60 W LED driver was implemented by the proposed design procedure and verified by simulation and experimental results, where the efficiency, PF, and THD are 92%, 0.94, and 6.3%, respectively. The LED power variation is well mitigated to below ${\pm}2%$ for 190 V < $V_s$ < 250 V by using the proposed simple control circuit.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1519-1522
• /
• 2009

We describe a 32" liquid-crystal display (LCD) with multi-touch sensing capability by integrating IR detector arrays onto the LED backlight plate. A transparent light guide is placed in front of the display screen, with IR LEDs disposed at its edges and emitting IR light into the light guide, the light is trapped by total internal reflection within the light guide to be as touch-sensing light. A physical contact with the acrylic plate surface will stimulate some trapped light to be escaped from the light guide and pass through LCD panel to be detected by the IR detectors. The touch-sensing LCD with this configuration can locate simultaneous multiple touche points on the touchable surface.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(2)
• /
• pp.509-512
• /
• 2004

This paper proposed a new solid State Relay(SSR) structure that can replace the conventional SSR as a power IC. The photodiode arrays, the main part of this structure, were designed and integrated in the same power It chip with the output parts, LDMOSFET and BJT, on a SOI substrate. The fabrication of this input part shared the same output LDMOSFET fabrication processs, except the additional deposition of Silicon nitride($Si_3N_4$) for the photo-detection part. According to LED illumination intensites and photo detecting areas, we could obtain voltage of 0.49V ${\~}$0.52V and current of 5.5uA ${\~}$ 108uA respectively from the fabricated unit photodiode. The maximum value of the voltage and the current we could obtain from the photodiode array were 3.58V and 24.4uA respectively, and the voltage was enough to operate the output LDMOSFET

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.299-299
• /
• 2014

기존의 고출력 광원들이 환경문제 등으로 외국에서 규제대상으로 지정되고 있는 가운데고체 상태의 광원인 Light-emitting diode (LED)는 기존의 광원에 비해 에너지 절감효과 크기 때문에 인해 널리 사용되고 있는 추세이다. 대부분의 백색 LED의 경우 청색 LED에 황색 형광체를 사용하는 것이 일반적이다. 그러나 이의 경우 빛의 흡수와 재방출 과정에서 생기는 에너지 변환손실의 문제가 불가피하다. 또한, 두 종류의 색을 섞어서 나타나는 낮은 연색성의 문제가 있고 사용할 수 있는 형광체의 종류와 조합도 일본 등 해외에 출원된 특허권으로 연구개발에 어려움이 있다. 이를 해결하기 위해 본 연구에서는 형광체를 사용하지 않는 단일 백색 LED를 개발을 위하여 극성과 반극성을 조합한 구조를 연구하였다. Photo-lithography를 이용하여 다양한 크기와 구조의 홀 패턴을 얻을 수 있었으며, metal organic chemical vapor deposition을 이용하여 다양한 형태의 피라미드 구조를 성장할 수 있었다. 패턴의 홀 크기와 홀 사이의 간격을 조절하면서 성장을 진행 하였고, 그 결과 pyramid와 truncated pyramid 모양의 GaN 구조를 성장할 수 있었다. [그림 1] Pyramid 구조의 반극성 면과 truncated pyramid 구조의 극성 면사이의 성장속도 차이 때문에 양자우물의 두께가 달라짐을 확인하였다. 이로 인해 양자구속효과가 달라져 다른 파장의 발광을 기대할 수 있었다. 뿐만 아니라 In의 확산거리가 Ga보다 길어서 홀사이 간격을 달리하면 In조성비가 달라지는 효과가 있음을 확인하였고 다양한 홀 사이 간격으로부터 각기 다른 파장의 발광을 얻을 수 있었다. 파장을 조금 더 상세하게 분석하기 위하여 Photoluminescence과 Cathodoluminescence을 사용하였다. 이로써 여러 파장을 발광하는 패턴을 섞어 넓은 영역의 발광 스펙트럼을 만들었다. 특히 패턴을 섞는 방법도 홀과 에피 구조를 섞는 방법, 크기가 다른 홀 패턴을 배열하는 방법등 다양히 하며 가장 좋을 패턴을 연구하였다. 그리하여 최적의 패턴과 구조, 성장조건을 찾아 백색의 CIE 좌표값을 얻을 수 있었다.

• Rapid Communication in Photoscience
• /
• 제3권1호
• /
• pp.16-19
• /
• 2014

Anodic self-organized titania nanotube (TNT) arrays have a great potential as efficient electron-transport materials for dye-sensitized solar cells (DSSC). Herewith we report the photovoltaic and kinetic investigations for a series of heteroleptic ruthenium complexes (RD16-RD18) sensitized on TNT films for DSSC applications. We found that the RD16 device had an enhanced short-circuit current density ($J_{SC}/mAcm^{-2}=15.0$) and an efficiency of power conversion (${\eta}=7.2%$) greater than that of a N719 device (${\eta}=7.1%$) due to the increasing light-harvesting and the broadened spectral features with thiophene-based ligands. However, the device made of RD17 (adding one more hexyl chain) showed smaller $J_{SC}(14.1mAcm^{-2})$ and poorer ${\eta}(6.8%)$ compare to those of RD16 due to smaller amount of dye-loading and less efficient electron injection for the RD17 device than for the RD16 device. For the RD18 dye (adding one more thiophene unit and one more hexyl chain), we found that the device showed even lower $J_{SC}(13.2mAcm^{-2}) $ that led to a poorest device performance (${\eta}=6.2%$) for the RD18 device. These results are against to those obtained from the same dyes sensitized on $TiO_2$ nanoparticle films and they can be rationalized according to the electron transport kinetics measured using the methods of charge extraction and transient photovoltage decays.

• 한국지반공학회논문집
• /
• 제38권11호
• /
• pp.7-17
• /
• 2022

본 연구에서는 중력식 사방댐 후면에 설치된 원통형 강성기둥 구조물의 배치변화가 토석류의 흐름거동 및 충격하중 변화에 미치는 영향을 확인하기 위해, 대책구조물들을 소형수로에 모사한 다음 원통형 구조물의 종방향 배열 수와유로 차단비율을 변화시켜가면서 실내모형실험을 수행하였다. 실험과정에서 대책구조물의 주변 흐름거동을 촬영하고, 중력식 사방댐의 작용하는 토석류의 충격하중을 측정하기 위해, 수로 측면과 상부에는 고속카메라를 설치하였고, 사방댐의 전면에는 로드셀을 설치하였다. 게다가, 글라스 비즈를 이용하여 토석류에 의해 동반되는 큰 직경의 거석들을 수로에 모사하였다. 실험결과, 중력식 사방댐 후면에 원통형 강성기둥 구조물의 설치는 토석류의 충격하중을 크게 감소시키는 것으로 나타났다. 또한, 대책구조물의 유로 차단비율을 증가시키면 거석을 동반한 토석류의 흐름억제를 증가시켜 충격하중을 더욱 감소시키는 것으로 나타났다.

• Current Optics and Photonics
• /
• 제2권6호
• /
• pp.532-539
• /
• 2018

Multiple LED arrays can be utilized in visible-light communication (VLC) to improve communication efficiency, while maintaining smart illumination functionality through dimming control. This paper proposes a modulation scheme called "Spatial Intensity Modulation" (SIM), where the effective number of turned-on LEDs is employed for data modulation and dimming control in VLC systems. Unlike the conventional pulse-amplitude modulation (PAM), symbol intensity levels are not determined by the amplitude levels of a VLC signal from each LED, but by counting the number of turned-on LEDs, illuminating with a single amplitude level. Because the intensity of a SIM symbol and the target dimming level are determined solely in the spatial domain, the problems of conventional PAM-based VLC and related MIMO VLC schemes, such as unstable dimming control, non uniform illumination functionality, and burdens of channel prediction, can be solved. By varying the number and formation of turned-on LEDs around the target dimming level in time, the proposed SIM scheme guarantees homogeneous illumination over a target area. An analysis of the dimming capacity, which is the achievable communication rate under the target dimming level in VLC, is provided by deriving the turn-on probability to maximize the entropy of the SIM-based VLC system. In addition, a practical design of dimmable SIM scheme applying the multilevel inverse source coding (MISC) method is proposed. The simulation results under a range of parameters provide baseline data to verify the performance of the proposed dimmable SIM scheme and applications in real systems.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 추계학술대회 논문집
• /
• pp.85-88
• /
• 1998

Light-emitting diode(LEDs), diode arrays, and phosphor display panels are finding increased use in a variety of commercial applications. Present and anticipated application of these devices include solid state indicator(e.g., digital clocks, meter readout) and display systems(e.g., instrument panels, TV display), the application being determined by the light -output capability and size availability(cost) of the particular device. In this work, Phosphor based on ZnS:Cu are used. Relation by luminance with the thickness of insulating layer and phosphor layer are discussed. Increased thickness of insulating layer are stable on voltage to 300V. By considering thickness and voltage, optimal structure and thickness are investigated. Also in order to maximize even surface emission, various sieving process are introduced. Very similar phosphor particle size is selected. Luminance by various wave intensity is also investigated. 150cd/m$^2$ luminance are investigated in stable voltage and frequency.

• 센서학회지
• /
• 제25권3호
• /
• pp.161-172
• /
• 2016

The use of a chemical sensor array can help discriminate between chemicals when comparing one sample with another. The ability to classify pattern characteristics from relatively small pieces of information has led to growing interest in methods of sensor recognition. A variety of pattern recognition algorithms, including the adaptive radial basis function network (RBFN), may be applicable to gas and/ or odor classification. In this paper, we provide a broad review of approaches for various types of gas and/or odor identification techniques based on RBFN and drift compensation techniques caused by sensor poisoning and aging.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.786-789
• /
• 2007

Fabrication of dot-patterned carbon nanotube (CNT) emitters with excellent field emission properties using photo-sensitive CNT paste is described. The photosensitive CNT paste showed good photopatternability, which led us to easily form $10-{\mu}m-diameter$ dot arrays. We presented a parametric study on formulating the photo-sensitive paste and their resultant field emission characteristics.