• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.8B
• /
• pp.706-711
• /
• 2012

The current visible light communication (VLC) systems have a short transmission distance and a low data rate. To overcome this, we studied on the method of appling MIMO technology to VLC. However, it is difficult to apply the original MIMO technology used in RF frequency to wireless VLC. In VLC system, a lens can be used to separate the transmitted signals. And, if we use an image sensor as the receiver, MIMO technology can be applied to LED wireless visible light communication. In this paper, we report an experiment of $2{\times}2$ LED wireless visible light communication using a commercial image sensor receiver. We show the experimental demonstration with a transmission length of 10.5 m and a data rate of 200 bit/s.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.4
• /
• pp.127-134
• /
• 2015

VLC(Visible Light Communication) is the technology to send and receive data by using visible light that LED emits. The basic principle of VLC is the communication by using flashing(ON/OFF) of the light from the LED that changes electricity to light in short time. As the recent advances in LED technology, VLC is also received a lot of attention and the research about it is in progress actively. Especially, the interest about indoor VLC system is increasing because the visible light can't pass through the wall. In this paper, we compose the indoor SISO VLC system with NRZ-OOK and VPPM modulation schemes. Also, we apply SR-ARQ, a kind of re-transmission error control schemes, to the VLC system. And then, we compare and analyze the performance of communication according to the location of receiver and the type of modulation by using BER, the number of transmission and throughput.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.7
• /
• pp.1391-1395
• /
• 2011

In this paper, would implement a transceiver for the visible light communication that based on wireless communication driving technology for LED illumination-based infrared ray communication, and measurement analyzed a design error rate of a transceiver variable rate has made about distance change -2.5m. The error rate measured a voltage variable along illuminate change between switchable circumstances, which has illuminated insight and outright. Each analyzed and measurement on the communication distance errors along the differences of disturbance light between night and days. The LED module has implemented for number of 6 through illumination dimming in case of different values. Also, implementation for the system module of a VLC transceiver based on the infrared sensors which used feedback outcome value has analyzed with error rate.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.7B
• /
• pp.606-612
• /
• 2012

Visible light communications (VLC) uses modern solid-state LEDs to broadcast information. Emerging white-light LEDs allows the combination of lighting and optical wireless communication in one optical source. In this paper, a new LED lighting using one-chip-type white LED is proposed for efficient illumination and optical wireless communications. Performance analysis such as horizontal illuminance, 3-dB cut-off frequency, inter-symbol interference, signal-to-noise ratio and bit-error rate shows the effects of the shapes of LED lighting. Performance of the proposed LED lighting under the existence of obstacles is superior to that of the existing LED lighting in illumination and optical wireless communication.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.5
• /
• pp.996-1000
• /
• 2010

In order to apply VLC (visible light communication) in harsh environment of nuclear power plant in-containment building, the high luminance LEDs, which are key components of the VLC system, have been gamma irradiated at the dose rate of 4 kGy/h during 72 hours up to a total dose of 288 kGy. The radiation induced coloration effect in the high luminance LED bulb made of acryl or plastic material was observed. In the VLC wireless data transmission experiment using the high luminance LEDs irradiated by high dose rate gamma-ray, the radiation induced coloration effect of the high luminance LED bulb extended the communication distance compared to non-irradiated LEDs.

• Journal of Sensor Science and Technology
• /
• v.24 no.5
• /
• pp.342-347
• /
• 2015

We introduce an indoor broadcasting system using light-emitting diode (LED) lamps coupled with a 220 V power line. Two couplers connected to the power line constitute a power line communication (PLC) link. The transmission path from an LED lamp to a photodetector forms a visible light communication (VLC) link in free space. When the LED lamp is coupled to the power line, a composite PLC-VLC link is formed, making it possible to transmit a VLC signal beyond line-of-sight. In experiments, a 4 kHz analog signal modulated with a 100 kHz carrier was sent to the power line by a PLC coupler, and LED lamps coupled to the power line detected the signal and radiated it to multiple VLC receivers in the room. This configuration is useful in expanding an indoor VLC sensor network to adjacent rooms or constructing a voice broadcasting system in a building or apartments with existing power lines.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.4
• /
• pp.35-43
• /
• 2017

In this paper, we propose indoor IoT monitoring system based on visible light communication using smart phone with attracting attentions in recent wireless communication. The main features and contributions of the proposed system developed in this paper are as follows. First, the actual data generated within indoor can be processed via the server by using only the visible light communication. Second, the collected data by using the visible light communication can be monitered by smart phone. Performance evaluation of the proposed system is performed under illumination of the normal fluorescent lamps. We first check successful transmission between transmitting module and receiving module of the data collection system. The monitoring system is tested according to the change of the degree of condensing and distance of the LED and the decoding success rate of the proposed smart phone application. We expect that the proposed system can be applied for indoor and outdoor IoT areas together.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.9
• /
• pp.2174-2182
• /
• 2013

This paper analyzed the PHY technology of IEEE 802.15.7 which is a technology trend and international standard of the LED-based VLC communication system. Also, the study analyzed the complexity of the system as well as the reception performance in a visible light wireless channel environment by analyzing detailed technology of PHY I mode and designing the RS code and block interleaver. According to the result, concerning PHY I which is operated in a single mode, it was confirmed that the complexity in designing the system was higher compared with an environment of the transmission of a short massage. Also it was confirmed that in a multi-path visible light channel environment, the reception SNR=1.5dB was required additionally.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.5
• /
• pp.479-485
• /
• 2013

In this paper, we propose a smart farming system using the visible light communication based on the software defined radio (SDR) technology and the conventional RF radio. The proposed system can continuously monitor growth environments of the LED plant factory and automatically control the LED plant factory to keep optimal growth environments. Furthermore, by creating a database from various growth factors, the LED plant factory can be efficiently managed.

• Journal of Satellite, Information and Communications
• /
• v.7 no.3
• /
• pp.41-46
• /
• 2012

Visible light communication(VLC) system based on LED devices has some specific advantages compared with RF system. First, visible light is harmless to human and there is no limit to using frequency band. Also, VLC system has good security performance, and it can use the very wide frequency band for data transmission. However, for simultaneously using the illumination and data transmission in VLC systems, degradation of code rate is occurred. So, in this paper, we proposed the novel line coding scheme for flicker free and efficient dimming control in VLC systems. From the simulation results, it is confirmed that proposed scheme has good flicker, dimming, and transmission performance compared to conventional variable pulse position modulation(VPPM) scheme.