• Journal of the Korea Convergence Society
• /
• v.8 no.3
• /
• pp.199-204
• /
• 2017

The Nowadays, LED head lamp has been used instead of halogen lamp at automotive head lamp. Inside this LED head lamp, there is a radiant heat panel which has the role to have the considerable influence upon LED life. As the radiant heat panel absorbs the heat from medium, the overheat of diode can prevented. in this study, the heat transfer and thermal stress are investigated according to the configuration of radiant heat panel. As the result of this study, the heat at model 1 decreases in comparison with model 2 and model 1 in design has the durability more than model 2. As the convergence technique is grafted on the design of radiant heat panel, the esthetic sense can be shown at the automotive head lamp.

• Journal of Digital Convergence
• /
• v.10 no.4
• /
• pp.37-43
• /
• 2012

LED TV integration test unit are the equipment for testing LED BLU as LED BLU's operation, error check, AGING work. The previous test unit were inconvenient because it must change test unit in production line according to LCD's kind and size. This paper develops by integration style test unit that can accommodate various LED TV BLU model of 32 ~ 52 inch that is not one LED TV BLU model. We make that output current is various to dimension of 80 ~ 215 mA. We make functions that are LED BLU state check, Diming and heat occurrence mitigation. Also we develop firmware program and that the program can be upgraded and that can support new panel.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.273-276
• /
• 2008

This article describes a LED illumination infrastructure for ubiquitous society based on the Visible Light Communication technology. The VLC is one of the advanced communication system using "Visible Light". The VLC system has a lot of advantageous features and can be used in various places for the next future generation. So, we analyzed ubiquitous service model based on the VLC system and some applications. And we renewed discussion about LED illumination infrastructure for u-Society.

• Korean Journal of Optics and Photonics
• /
• v.18 no.2
• /
• pp.111-116
• /
• 2007

A high power LED which is being used in many illumination applications as a new light source was simulated for its physical structure and then its optical properties were analyzed. To obtain accurate results from the designed LED model, properties of the die chip and reflector cup were varied. As a result, a high power LED model which has a radiation pattern of a Lambertian with its viewing angle of approximately $140^{\circ}$ and total included angle of $160^{\circ}$ was designed.

• Science of Emotion and Sensibility
• /
• v.15 no.3
• /
• pp.381-388
• /
• 2012

The purpose of this study is to check if LED lighting can be used as general lighting and examine the color rendering property of full color RGB LED lighting. CRI is one of the important properties of evaluating lighting. However the present CRI does not fully evaluate LED lightings. Firstly, the performance of a simple task was compared other than comparing CRI values for different lighting. For experimental preparation three types of lightings were used; standard D65 fluorescent tube, general household fluorescent tube, and RGB LED lighting. All three lightings show high error for Purple-Red. All three lightings show similar error for all hues and prove that color discrimination is not affected by the lighting. This proves that LED could be used as general lighting. Secondly, problems of the conventional CIE CRI method are considered and new models are suggested for the new lighting source. Each of the models was evaluated with visual experiment results obtained by the white light matching experiment. The suggested model is based on the CIE CRI method but replaces the color space model by CIELAB, color difference model by CIEDE2000, and chromatic adaptation model by CAT02.

• Korean Journal of Optics and Photonics
• /
• v.30 no.5
• /
• pp.193-196
• /
• 2019

The design and control of thermal flow is important for the operation of high-power laser diodes (LDs). It is necessary to analyze and improve the thermal bottleneck near the active layer of an LD. As the error in prediction of the thermal resistance of an LD is large, typically due to the hyperbolic increase and saturation to linear increase of the thermal resistance as a function of thickness, it is helpful to use a simple, modified divergence model for the improvement and optimization of thermal resistance. The characteristics of LDs are described quite well, in that the values for simulated thermal resistance curves and the thermal cross section followed are almost the same as the values from the model function. Also, the thermal-cross-section curve obtained by differentiating the thermal resistance is good for identifying thermal bottlenecks intuitively, and is also fitted quite well by the model proposed for both a typical LD structure and an improved LD with thin capping and high thermal conductivity.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.3
• /
• pp.1-7
• /
• 2015

Korea's electricity supply and demand policy has focusing on electricity demand side management instead of the expanding supply and a lot of effort for LED(Light Emitting Diode) at the time. This paper calculated the optimal subsidy for LED spread. For this purpose, it analyzed the impact on spread of the lighting appliances each subsidy level from BDM(Bass Diffusion Model) and predicted the number of lighting appliances according to subsidy level in the future. The case study is calculated susidy for satisfaction of LED target using the suggested model in the future and verified availability.

• Proceedings of the Korean Reliability Society Conference
• /
• 2011.06a
• /
• pp.79-85
• /
• 2011

LED(Light Emitting Diode) is a powerful device used in applications as diverse as replacements for aviation lighting, automotive lighting as well as in traffic signals. This study is to propose a prediction system based on the degradation model of LED which is determined by combining scale and shape parameter. The degradation model is analysed goodness of fit test using calculated R-square, and is compared with previous models. A LED prediction system using degradation model is developed to automate estimations of degradation parameters and lifetimes.

• Journal of the Korean Institute of Educational Facilities
• /
• v.20 no.3
• /
• pp.29-39
• /
• 2013

This study addresses the evaluation on the satisfaction of school illumination quality by applying SERVPERF model after extracting factors affecting school illumination quality. Three types of illumination systems (fluorescence light, general LED light and high color rendition LED light) were tested by students who have used each illumination system. Three factors such as effectiveness, esthetic sense and function were developed for evaluation. Satisfaction evaluation was performed based on applied SERVPERF model by comparing perceived levels. The differences of perceived levels of satisfaction on the illumination systems were analyzed by ANOVA. The results said respondents satisfy only the high color rendition LED light regardless of three factors. Especially, students who experienced high color rendition LED light have strong intention to recommend that illumination system to other schools. They also express their desire to use that system at home. Interestingly, there is not much satisfaction difference between fluorescence light and general LED light.

• Journal of Energy Engineering
• /
• v.26 no.2
• /
• pp.64-72
• /
• 2017

The performance analysis of the 70 W class LED lighting system suitable for the Middle East environment was performed using the lumped parameter model. The LED light is composed of a heating substrate, a heat pipe, and a heat sink. We divided the LED lights into four objects and applied energy equilibrium to each of them to establish four lumped nonlinear differential equations. The solution of the simultaneous equations was obtained by the Runge-Kutta method. Convective heat transfer coefficients of the lumped model were obtained by multidimensional CFD analysis. As a result of comparison with experiment, it was found that the heating substrate had an error of $1.5^{\circ}C$ and the upper heat sink had an error of $1.8^{\circ}C$ and the relative error was about 0.6 %. Using this model, temperature distribution analysis was performed for normal operating conditions with an ambient temperature of $55^{\circ}C$, with sunlight only, with abnormal operating conditions with sunlight, and without an upper heat sink.