• 한국전기전자재료학회논문지
• /
• 제23권6호
• /
• pp.471-476
• /
• 2010

This paper has studied dissymmetrical light distribution design using the secondary optics in the simulation. fundamental Lambertian radiation distribution based on LED has been cut off by the secondary optics, and the first surface slope of lens and second surface slope of total reflection area have been calculated through formula. PMMA (the index of refraction: 1.49361) which is material of lens has been selected. critical angle($42.02993^{\circ}$) between Air and PMMA has been calulated by snell's law, and total reflection angle slope has been selected about $16.67^{\circ}$ to occur the total reflection. when the first surface slope and the second surface slope has been set up, Rays of all total reflection area have generated the total reflection. finally, designed LED Module has been estimated by Korean Industrial Standards for LED safety street lighting. dissymmetrical light distribution have been analyzed with reached effect of road illuminance, and average road illuminance which are each 70.6 lx, 40.35 lx, and 25.88 lx have been satisfied with Korean Industrial Standards for LED safety street lighting.

• 한국기계가공학회지
• /
• 제15권6호
• /
• pp.70-76
• /
• 2016

Commercialization of surface lighting using Light Emitting Diodes (LED) has embraced the advance to Organic Light Emitting Diode (OLED) technology. This is necessary to achieve light-efficiency-improvement and longer component life. The range of application of LED lighting for both interior and outdoor lights has been gradually expanding. Automobiles and home appliances are now included. In the case of LED surface lighting in a domestic refrigerator, achieving high efficiency requires optimization of the number of LEDs in a pack. Optimization is also required in the design stage of development with regard to the conversion of the light source type from point light sources to the surface light type. This paper addresses these design problems. It presents a study of brightness variations for design solutions that differ from the existing technology in both the number of LED packages and use of Light Gathering Power (LGP) information. The intention is to facilitate production of high brightness LED surface lighting for domestic refrigerators.

• International Journal of Advanced Culture Technology
• /
• 제4권4호
• /
• pp.6-12
• /
• 2016

Due to the development of technology, the modern people became to require not only more convenient life but also more comfortable and emotional environment, and individually suitable living environment is applied to residents in a residential space. Recently, while the LED lighting was variously attempted in every sector in society, it is needed to express differentiated lighting according to the resident's individual lifestyle in a residential space. In this paper, we analyze the role of LED lighting suitable for the digitalized lifestyle of the modern people through the relevant literature survey and case studies. The following results are obtained in summary of the rapidly changed recent trends of LED lighting. First, LED light replace existing light sources due to the advanced new technology in LED industry, and take the spotlight as a new lighting solution with the development of variable color LED bulb and the control technology by the wired and wireless communications. Second, LED lighting can be structurally applicable to every lighting device because of its compact and lightweight units, can produce abundant light environment by expression of variable colors and moods with the easy coloring and dimming control, can be reborn as emotional lighting design. Third, as recently practices are constantly appeared that integrate LED lights in the interior elements, such as object and furniture, and combine advanced LED lighting technology to new materials, the portion of illumination on the indoor environment is further increased after integrating the LED lighting and interior elements make boundaries of lighting and product architecture become blurred. LED lighting is confirmed that is being changed from the external functionality including material, shape, color, and etc. into the contextual emotion design including the lights expression, variable color, brightness control, making image, and etc. as the light source in current smart lighting era.

• 한국정보전자통신기술학회논문지
• /
• 제7권1호
• /
• pp.20-25
• /
• 2014

차세대 친환경 조명인 LED소자는 온도가 올라갈수록 LED의 발광효율이 떨어지고 $80^{\circ}C$이상 올라갈수록 수명이 감소하고 스펙트럼선의 파장이 본래의 파장보다 장파장 쪽으로 이동하는 Red Shift현상 및 $T_j$ 상승에 따라 광 출력이 감소되는 큰 문제점이 대두되고 있어 열을 최소화 할 수 있는 방열설계 연구가 진행 중이다. COB Type LED의 경우 보드에 LED 칩을 직접 결합시켜 열 저항을 낮췄지만 주거용 13.5W의 경우 방열판을 통해 발열 문제를 해결해야한다. 본 논문에서는 주거용 13.5W COB LED 다운라이트에 맞게 Heat Sink를 설계하고, 그 설계한 Heat Sink와 13.5W COB를 패키징하여 Solidworks flow simulation을 통해 최적의 Fin두께를 선정하여 접촉식 온도계를 사용한 열적 특성을 분석 하고 평가 하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1491-1492
• /
• 2008

This paper investigates life test of LED lighting module using accelerated life test method. Pooly designed LED lighting systems can experience a short life. By knowing the relationship between life and heat, LED system manufacturers can design and build long-lasting systems. In this study, various white LED from several other manufacturer were subjected to life tests at LED lated temperatures for prediction to life of LED lighting systems. Results show that the different LED products have various optical characteristic and different life values.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 춘계학술대회 논문집
• /
• pp.190-192
• /
• 2009

LED를 광원으로 사용하는 조명기구는 용도에 맞는 적합한 배광을 가져야 한다. LED 조명기구의 배광을 달성하는 LED 2차 렌즈의 설계를 위해서는 LED의 기본 배광이 고려되어야 하며 일반적으로 기본 배광은 LED 돔의 형태에 따라 달라진다. 일반적으로 사용되는 램버시안 배광을 갖는 LED를 기본으로 하여 돔 형태 및 기본배광이 다른 각각의 LED에 대한 2차 렌즈를 설계하고 시뮬레이션을 통해 그 성능을 평가하였다.

• 한국전자통신학회논문지
• /
• 제10권5호
• /
• pp.579-586
• /
• 2015

본 논문에서는 색상과 밝기가 조절 가능한 LED 조명 기기를 설계하고 구현하였다. 본 조명 기기는 RGB와 백색 LED로 구성되고 마이크로 컨트롤러에 의해 구동된다. 4색 LED를 사용하여 자연계의 거의 모든 색상을 조명 시스템 내에서 표현하도록 하였다. 조명기구의 수명 연장을 위해 LED를 흐르는 전류는 최대값을 넘지 않도록 PWM을 이용한 전류 제어를 실시하였다. 또한 사용자가 미리 설정한 여러 개의 색상과 밝기정보를 저장하고 다시 불러올 수 있는 기능을 탑재하여 사용자가 손쉽게 원하는 조명을 설정하여 사용하도록 하였다. 구현된 조명시스템은 전자기적합성 검사 등을 통과하였으며 실제 조명기구 제품으로 사용가능하다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.162-162
• /
• 2010

In this study, optical analysis for 100W LED safety street lighting was conducted. Experimental research on such single LED was the first undertaken. simulation modeling based on optical properties of single LED has compared single LED product also designed 100W simulation modeling has compared average road illuminance with Korean Industrial Standards for LED safety street lighting(KS C7658:2009). 100W safety street lighting (model: CE180-ST-OS) designed by simulation has been also compared between product and 100W simulation modeling, and error rates have showed average 5.6[%]. Designed 100W LED safety street lighting base on simulation modeling was proven by comparison experiments. Through the simulations and the corresponding analysis, it was found that the tested 100W LED safety street lamp had reasonable performance. Design method for LED safety Street lamps have been summarized, based on the optical analysis.

• 한국정밀공학회지
• /
• 제29권7호
• /
• pp.778-784
• /
• 2012

In comparison with some other light sources, LED has merits such as increased life expectancy, fast response, pollution free, and high energy efficiency. Lately, due to development of LED with high brightness and capacity, LED has widely used in many industrial fields such as automotive, aviation, display, transportation and special lighting applications. Since the high heat generation of LED chips can cause a reduction in lifetime, degradation of luminous efficiency, and variation of color temperature, studies have been carried out on the optimization of LED packaging and heat sinks. In this study, experiments on measuring the heat generation rate of LED and the cooling performance of a heat sink were carried for analyzing the thermal characteristics of LED lighting system in free convection. From the results, dimensionless correlation on the cooling performance of heat sink in natural convection was proposed with Nusselt number and Rayleigh number as a guideline for designing cooling device of LED lightings.

• 한국산학기술학회논문지
• /
• 제21권10호
• /
• pp.1-7
• /
• 2020

최근 LED 디스플레이 시스템이 활발히 보급됨에 따라서 시스템 구동을 위한 LED 드라이버의 효과적인 제어방법에 대한 연구가 진행 중이다. 그 중에 가장 대표적인 것이 LED Driver 채널의 균일한 밝기 제어이다. 본 논문 에서는 채널 휘도 편차 최소화를 위한 전류보상 및 시스템 보호 기능을 갖는 BLU용 LED driver IC를 제안하였다. 제안하는 LED Driver IC는 채널 간 ±3% 이내의 current accuracy와 150mA 채널 전류를 목표로 설계하였다. 설계 사양을 만족시키기 위해 채널 구동 PWM 신호를 이용한 chopping 동작을 수행하도록 하여 채널 앰프 옵셋을 상쇄할 수 있도록 하였다. 또한 pre-charge기능을 구현하여 빠른 동작 속도와 채널간 휘도 편차를 최소화할 수 있도록 하였다. LED에러(오픈, 쇼트), 스위치 TR 쇼트 감지 및 동작 온도 보호 회로를 설계하여 IC 및 BLU시스템을 보호할 수 있도록 하였다. 제안된 IC는 Cadence 및 Synopsys사의 Design Tool을 사용하여 설계 하였으며, Magnachip 0.35um CMOS 공정을 사용하여 제작되었다. 제작된 LED driver IC는 채널 간 ±1.5% 이내의 current accuracy와 150mA 채널 출력특성을 만족하였으며, 평가 보드를 통해 에러 검출 회로들이 정상 동작함을 확인하였다.