• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.515-516
• /
• 2010

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.06a
• /
• pp.403-404
• /
• 2009

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.30 no.3
• /
• pp.21-29
• /
• 2016

In this paper, optical tracking and analysis was carried out to find the optical properties with respect to various geometric design parameters of collimator lens which is very efficient when collect the light. As a result, a whole, ellipse incident part can obtain a high light efficiency and a narrow beam angle, and angled cylinder incident part is confirmed to obtain high efficiency and a narrow beam angle at a certain height or more. When Transmission part have a specific surface which can reflect the light in forward direction, a good optical properties was confirmed.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.5
• /
• pp.587-592
• /
• 2015

According to increase in the use of the LED, the demand for low power consumption LED display design of the controller block has increased. In this paper, the low power LED controller block was designed through the power source supply that leads adiabatic operation from constant current source circuit operated by digital signal control. The proposed circuit was implemented using a 0.35um CMOS process. and it demonstrated linear operation of the circuit. From the simulation result, the proposed circuit was evaluated with about 82% power consumption reduction effect in comparison with conventional LED controller block. This research is expected to be helpful for the low power operation and the solution for heat problem of LED display.

• 전자공학회논문지 IE
• /
• v.46 no.3
• /
• pp.12-18
• /
• 2009

In this paper, we developed white balance correction processor for Full Color LED Display System which could be display uniformity color and soft light by adjusting brightness of red, green, blue pixel, individually. This processor correct brightness by calculating operating current of each pixel(red, green, blue LED) on the basis of characteristic curve of LED device when we named "a" as a specific characteristic value, "b" as a brightness correction value according to using time, "X" as a operating current value, and "Y" as brightness value. As the results, we solved the reduction problem of brightness for long used LED devices, according to increase entire mean of brightness value by adjusting "b" value from the brightness characteristic function.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.10
• /
• pp.235-242
• /
• 2014

LED lighting control technique is one of the ongoing research areas for efficient management of LED lighting. In this paper, we design and implementation of LED street lighting remote control system which have a wired and wireless communication function for LED street lighting remote control. The implemented system can automatically dimming and individual(or consolidated) LED street lighting via RS-485/422 or Wi-Fi. In experimental results, the implemented remote control system was satisfactory for all of the desired functions.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.1
• /
• pp.145-152
• /
• 2016

The usage of LED(Light Emitting Diode) has been rapidly increased and energy efficient management of LED light system is regarded as an important technology to enhance the energy efficiency. In this paper, we design and implementation of LED lighting controller which can control the LED lighting by using the wire and wireless communication technology based on the LAN(Local Area Network) and PAN(Personal Area Network). The implemented system can reduce the cost of LED lighting installing and avoids complicated wiring problem. And it is possible to minimize power consumption through automatic or manual LED control that they wished. In experimental results, the implemented LED lighting controller was satisfactory for all of the desired functions.

• Journal of information and communication convergence engineering
• /
• v.11 no.4
• /
• pp.247-252
• /
• 2013

An intelligent light emitting diode (LED) dimming system is designed and implemented for energy-saving lighting systems. An LED light bulb is powered by an LED driver controlled by a microcontroller using pulse width modulation (PWM) signals. By changing the duty cycle of the PWM signals, the LED driver generates a driving current of up to 1,000 mA. The current consumption by the LED light bulb exhibits a very linear characteristic that indicates that the level of LED dimming can be finely tuned. Multiple sensors-lighting intensity and ultrasonic range sensors-are combined with the LED dimming system to realize an automatically controllable LED lighting system. The light intensity sensor is capable of sensing ambient light. The ultrasonic range sensor can detect objects from 0.15 to 5.6 m at a resolution of 0.0254 m. The collected information by the light intensity and ultrasonic range sensors is processed by the microcontroller that in turn automatically controls the brightness of the LED light bulb. The algorithm of the software for the LED dimming system is also described.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.30-31
• /
• 2011

현재의 고출력 LED (Light Emitting Diode)는 긴 수명시간, 적은 유지보수 비용, 그리고 고효율의 특징으로 차세대 조명 소자로 각광받고 있다. 본 논문에서는 Two-stage LED 구동 회로에서 온도 변화에 따른 정전류 제어가 가능한 LED 구동 드라이브의 효율을 개선하기 위해 입력 전압을 기본 전압으로 하고 LED 출력전류를 통한 전압 변동분 만을 전력변환하여 보상 할 수 있는 LED 구동 드라이브 회로를 연구 하였다. 제안된 비절연 전압 변동분 보상회로는 기존 DC/DC 컨버터를 이용한 LED 구동 드라이브에 비해 효율이 개선 되었음을 실험을 통해 알 수 있었다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.12
• /
• pp.1-10
• /
• 2011

Recently medical facilities that can help to heal the interpretation have evolved as a healing space. Accordingly, the patient's emotional, psychological and social ward plan to meet the needs of the patient to recover is important. The medical team is also related to the nature of human life, so they are experiencing high stress levels compared to other professionals. However, most places don't consider the user's psychological behavior. The purpose of this study is to build user-friendly lighting environment using LED lighting. LED lighting is easy to adjust illuminance and color temperature, and it is can be implemented in the medical area.