• The Journal of the Acoustical Society of Korea
• /
• v.32 no.3
• /
• pp.199-207
• /
• 2013

In this paper, a $64{\times}8$ channel 1.75D ultrasonic transducer made of piezoelectric single crystals was designed, fabricated, and evaluated. First, a structure of the transducer was selected to be suitable for wiring on a planar array, and components were fabricated to correspond to the structure. Detailed structure of the transducer was designed through finite element analyses. As main performance factors, the crosstalk between neighboring elements was reduced through the control of kerf width and material, and desired frequency bandwidth of the transducer was achieved by designing the optimal thicknesses of the piezoelectric single crystal and matching layers. An experimental prototype of the transducer was fabricated following the design, and its performance was measured. Then the experimental results were compared with those of the finite element analysis, which led to the evaluation of the transducer developed in this work.

• Korean Journal of Optics and Photonics
• /
• v.30 no.4
• /
• pp.146-153
• /
• 2019

The exposure system is a device that transfers a circuit pattern to a desired location. To display patterns on a substrate without deforming the optical characteristics, the characteristics of the optical exposure system are very important. Therefore, to form a microcircuit pattern, a small divergence angle should impinge on the irradiation area. Also, since the light from the source must react uniformly with the photosensitizer, it must have high luminance efficiency and uniformity of illumination. In this paper a parabolic reflector and an aspherical lens were designed to solve the problem of narrow-angle implementation, and it was confirmed by simulation analysis after their arrangement that the beam angle, uniformity, and maximum illuminance satisfied the target performance.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.11
• /
• pp.87-91
• /
• 2004

The continuing development of the information technology industry and wireless networking has increased the use of mobile device, which provides both portability and mobility. As follows, demands for extended services within the wireless Internet are increasing rapidly. Because it still in its initial stages of development, the wireless Internet presents continuing problems in security and limitations in the content of services. Furthermore, most mobile equipment utilizes the touch pad input method. This input method is inconvenient when a user needs to input a long sentence. This has led to the more convenient development of image selection by using a pen mouse. In order to provide security under these conditions, a HASH code may be used to transmit an array of information and input values, created by the image input at the early stages. Thus, authentication and key exchange are completed securely. Messages are encoded and transmitted, preventing both information drain by insiders and interference from outside.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.62 no.2
• /
• pp.72-78
• /
• 2013

In this study, samples from the site where there occurred unbalanced current when cable routing were analyzed, and the simulation program for electric power system analysis, PSCAD/EMTDC, was used to calculate the current unbalance on cable routing. Based on electromagnetic finite element analysis(FEA), electromagnetic parameters enabled the interlocking with COMSOL for the calculation of allowable current ampacity and magnetic filed distribution. This then led to modeling unbalanced current between common modes using the unbalanced current analysis program, thereby comparing and discussing the results from both. The analyzed model is a common mode 2 parallel circuit, which is a basic model for cable routing, and by arranging cables in various ways, the arrangement with the least current unbalance was suggested, which would, in the future, prevent earth faults and extend life for the whole cable.

• Journal of the Korean Ceramic Society
• /
• v.48 no.6
• /
• pp.493-498
• /
• 2011

Optimal atomic configurations in a nanoparticle were predicted by genetic algorithm. A truncated octahedron with a fixed composition of 1 : 1 was investigated as a model system. A Python code for genetic algorithm linked with a molecular dynamics method was developed. Various operators were implemented to accelerate the optimization of atomic configuration for a given composition and a given morphology of a nanoparticle. The combination of random mix as a crossover operator and total_inversion as a mutation operator showed the most stable structure within the shortest calculation time. Pt-Ag core-shell structure was predicted as the most stable structure for a nanoparticle of approximately 4 nm in diameter. The calculation results in this study led to successful prediction of the atomic configuration of nanoparticle, the size of which is comparable to that of practical nanoparticls for the application to the nanocatalyst.

• Journal of the Korean Society of Visualization
• /
• v.16 no.3
• /
• pp.26-34
• /
• 2018

In the present study, an experimental assessment has been made of the drag reducing efficiency of the outer-layer vertical blades, which were first devised by Hutchins(1). A detailed flow field measurements have been performed using 2-D time resolved PIV with a view to enabling the identification of drag reduction mechanism. In addition, an experimental investigation has been made of the applicability of outer-layer vertical blades to real ship model. The arrays of outer-layer vertical blades have been installed onto the flat side and flat bottom of a 300k KVLCC model. A series of towing tank test has been carried out to investigate resistance (CTM) reduction efficiency with various geometric parameters and installed places of blades. The installation of vertical blades led to the CTM reduction of 1.44~3.17% near the service speed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.2
• /
• pp.141-149
• /
• 2004

The aim of this study was to test the validity of the hypothesis that the karyotypes of four species of Lepilemuridae were formed spontaneously from their ancestral hybrid karyotype. Hypothetical ancestral haploid Karyotype of Lepilemuridae is composed of 18 autosomes and X chromosomes. Lepilemur mustelinus karyotype has four tandem fused chromosomes and one Robertsonian translocated chromosome pairs. Lepilemur septentrionalis septentrionalis karyotype has only two pairs of translocated chromosomes. We reconstruct and suggest ancestral karyotype of LMU(ancLMU) and LSS(ancLSS), from which all four studied species were derived. Hybrids of ancLMU and ancLSS were formed and produce differently fused equilibrated gametes via circular form arrangement during gametogenesis. Five unit of trivalent homologous chromosome pairs were engaged in a circular form to give new gamete corresponding to the karyotype of L. dorsalis, orientation of one unit of trivalent was inversed in the circle to gave new gamete corresponding to the karyotype of L. leucopus. Seven homologous chromosome pairs were engaged in circular form to give haploid karyotype of Lepilemur ruficaudatus. Only one homologous chromosome pair is dissociated and the other chromosome pairs rearranged in the circle to form haploid karyotype of Lepilemur edwardsi. The new gametes could be produced from these circular forms. When the new gamete fertilized with the same type of gamete, The new homozygote is produced as existing L. dorsalis, L. leucopus, L. edwardsi and L. ruficaudatus. These results support the theory that new species could be formed in hybrid population through activated chromosome fusion, chromosome rearrangement in circular from at zygotene stage and production of equilibrated gametes to form homozygote new species.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.20-20
• /
• 2008

최근 LEDs가 동일 효율의 전구에 비해 에너지 절감 효과 크며 신뢰성이 뛰어나다기 때문에 기존 광원을 빠르게 대체해 나가고 있다. 특히 자외선 파장을 가지는 LEDs는 발열이 낮아 냉각장치가 필요 없으며, 수명이 길어 기존 UV lamp에 비해 많은 장점을 가지고 있기 때문에 많은 관심을 밭고 있다. 그럼에도 불구하고 자외선 LEDs는 제조 단가가 높고 power가 낮아 소요량이 많은 등 아직 해결해야 할 부분이 많기 때문에 이를 해결하기 위해 여러가지 재료와 다양한 구조가 고려되고 있다. 그 중 ZnO는 II-VI족 화합물 반도체로써 UV영역의 넓은 밴드갭(3.37eV)을 가지는 투명한 재료이다. 특히 ZnO는 60meV의 큰 엑시톤 결합에너지를 가지며, 가시광 영역에서 높은 투과율을 가지고, 상온에서 물리적, 화학적으로 안정하기 때문에 UV sensor, UV laser, UV converter, UV LEDs 등 광소자 분야에서 연구가 활발히 진행되고 있다. ZnO가 광소자의 발광재료로써 높은 효율을 얻기 위해서는 결정성을 높여 내부 결함을 감소시키며, 발광 면적을 높일 수 있는 구조가 요구된다. 특히 MOCVD 법으로 성장한 나노막대는 에피성장되어 높은 결정성을 기대할 수 있으며, 성장 조건을 조절함으로써 나노막대의 aspect ratio와 밀도 제어할 수 있기 때문에 표면적을 효과적으로 넓혀 높은 발광효율을 얻을 수 있다. 본 실험에서는 MOCVD 법으로 실리콘과 사파이어 기판 위에 다양한 성장 온도를 가진 나노구조를 성장 시키고 온도에 따른 형상 변화와 특성을 평가하였다. ZnO 의 성장온도가 약 $360^{\circ}C$ 일 때, 밀도가 조밀하고 기판에 수직 배열한 균일한 나노막대가 성장되었으며 우수한 결정성, 광학적 특성이 나타남을 SEM, TEM, PL, XRD를 사용하여 확인하였다.

• Journal of Life Science
• /
• v.27 no.3
• /
• pp.267-274
• /
• 2017

The patient with end-stage renal disease show several nervous complications. The factors contributing to the nervous complications are still incompletely characterized. Cyanate, known as one of the uremic toxins, is derived spontaneously from urea. To investigate the mechanism of cyanate-induced effect on C6 glioma cells, the glioma cells were treated with 0, 1, 5, 10, 20 and 40 mM cyanate. There was a dose-dependent decrease in cell viability and the decreased number of cell was observed in glioma cells by treatment with cyanate. Western blot showed the down- regulation of procaspase-3, which means up-regulation of caspase-3, and the up-regulation of caspase-8, but the down-regulation by cyanate. In addition, cDNA microarray showed 934 down-regulated genes and 165 up-regulated genes on 1,099 genes in cyanate treated group. Treatment with cyanate led to 16 down-regulated genes and 6 up-regulated genes on apoptosis category, and especially heat shock 70 kD protein 1A gene on the category of apoptosis was significantly up-regulated. These results suggest that cyanate can induce apoptosis through caspase-8 and caspase-3 in glioma cells and decrease of gene expression including apoptosis category in glioma cells. These effects of cyanate may play a role in the nervous complications of patient with end-stage renal disease.

• Composites Research
• /
• v.28 no.4
• /
• pp.232-238
• /
• 2015

As a new method to predict the degree of dispersion in carbon nanocomposites, the electrical resistance (ER) method has been evaluated. After CNT epoxy resin was dropped on CF tow, the change in electrical resistance of carbon fiber tow was measured to evaluate dispersion condition in CNT epoxy resin. Good dispersion of CNTs in carbon nanocomposite exhibited low change in ER due to wetted resin penetrated on CF tow. However, because CNT network was formed among CFs, non-uniform dispersion occurred due to nanoparticle filtering effect by CF tow. The change in ER for poor dispersion exhibited large ER signal change. The change in ER was used for the dispersion evaluation of CNT epoxy resin. Correlation between interlaminar shear strength (ILSS) and dispersion condition by ER method was established. Good CNT dispersion in nanocomposites led to good interfacial properties of fiberreinforced nanocomposites.