• 한국환경과학회지
• /
• 제27권10호
• /
• pp.821-829
• /
• 2018

This study was conducted to examine the influence of Light-Emitting Diode (LED) light quality in urban agricultural plant factories on the growth and development of Seolhyang strawberry daughter plants in order to improve the efficiency of daughter plant growth and urban agriculture. LED light quality by demonstrated that above-ground growth and development were greatest for daughter plant 2. Daughter plant 1 showed the next highest growth and development, followed by daughter plant 3. Among the different qualities of LED light, the stem was thickest and growth rate of leaves was highest for R + B III (LED quality: red 660 nm + blue 450 nm/photosynthetic photon flux density (PPFD): $241-243{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$) and lowest for R (red $660nm/115-117{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$). Plant height, leaf width, petiole length, and the leaf growth rate were highest for W (white fluorescent lamp/$241-243{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$) and lowest for R + B I (red 660nm+blue 450nm/$80-82{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$). For above-ground growth and development, as the plants surpassed the seedling age, mixed light (red + blue), rather than monochromatic light (red or blue), and higher PPFD values tended to increase development. Regarding the quality of the LED light, daughter plant 2 showed the highest chlorophyll content, followed by daughter plant 1, and daughter plant 3 showed the least chlorophyll content. When the wavelength was monochromatic, chlorophyll content increased, compared to that when PPFD values were increased. Mixed light vitality was highest in daughter plant 2, followed by 1, and 3, showed increased photosynthesis when PPFD values were high with mixed light, in contrast to the results observed for chlorophyll content.

• 수산해양기술연구
• /
• 제46권4호
• /
• pp.503-508
• /
• 2010

Common LED (Light Emitting Diode) lamp has many advantages to compare with fluorescent lamp, long life and no pollution matter like the mercury. The LED lamp is a good light source especially for shipboard lighting because of its compact structure which prevents explosion and shock. Also, low maintenance cost is expected due to its longer life time in comparison with conventional lamps. The LED lamp, however, need some estimates that change of voltage and frequency, vibration, moisture on board to definite accommodation of the LED lamp to shipboard. The purpose of this study is to compare physical properties of a fluorescent lamp with one of the common LED lamp so as to analyze accommodation of common LED lamp on board. This study was carried out in two stages. First, temperature, humidity of illumination, voltage, electric current, frequency and electric power were measured by using experimental equipments. Second, a comparative analysis of consumption electric power, annual oil charge, annual CO2 emission and lamp life time, etc of the fluorescent lamp and common LED one was made. As a result of the study, the consumption electric power of fluorescent lamp was 50% higher than one of the common LED lamp. As a result of measuring life time, it was found that life time of common LED lamp was more about 3.5 fold than one of the fluorescent lamp. Considering these results, it's thought that common LED lamp is verified that energy saving is possible and using is possible as substitute for fluorescent lamp on board.

• 한국전자파학회논문지
• /
• 제21권8호
• /
• pp.905-910
• /
• 2010

본 논문에서는 조명용 LED(Light Emitting Diode)의 스위칭 구동 회로를 이용한 변조 기법으로 조명 기능과 무선 통신 기능을 동시에 수행하는 가시광 통신(VLC: Visible Light Communication) 시스템을 제안하였다. 본 방식은 기존의 선형 영역에서 동작하는 LED 구동 회로를 갖는 가시광 통신 시스템에 비해 고효율이므로 고출력의 조명용 LED 시스템에 적용할 수 있는 장점이 있다. 제안된 시스템의 유용성을 입증하기 위하여 디지틀 방식의 오디오 시스템을 채용하여 가시광 통신 시스템을 구현하고, 그 실험 결과를 제시함으로써 제안된 방식의 우수성을 검증하였다. 실험 결과, 제안 회로의 시작품은 특별한 광필터 없이 20 W급 조명을 사용해서 약 1.5 m의 반경에서 최대 10 Mbps의 데이터 전송률을 달성하였다.

• 한국산림과학회지
• /
• 제99권5호
• /
• pp.750-754
• /
• 2010

Among the environmental conditions employed in micropropagation, light quality plays an important role in growth, specially morphogenesis and photosynthesis. The effect of radiation quality (350-740 nm) on the development and growth of zygotic embryos and in vitro plantlets of open-pollinated chestnut (Castanea crenata S. et Z.) were studied. Two types of explants were exposed for 4 weeks to cool white (W, as control), monochromatic red (R, peak emission 650 nm), monochromatic blue (B, peak emission 440 nm), red+blue (R+B, 1:1), or red+far-red (R+Fr, 1:1, far-red peak emission 720 nm) radiation from a light-emitting-diode (LED) system. While the zygotic embryos showed positive photoblastic behavior, their germination was inhibited by blue radiation. Hypocotyl elongation and root development were promoted by red radiation. The emergence of primary leaf and its expansion were faster under blue than under red radiation. In the plantlets, red and red+far-red radiation significantly increased the formation and growth of the root, whereas blue light reduced rooting. Therefore, radiation quality appears to influence some steps in the development of zygotic embryos and plantlets in the chestnut.

• 한국통신학회논문지
• /
• 제37C권9호
• /
• pp.784-790
• /
• 2012

본 논문에서는 가시광 통신(visible light communication: VLC) 상향 전송에서 전송거리 확대를 위한 전송방식을 제안하였다. 이를 위해 집광된 infrared(IR)-light emitting diode(LED)의 출력을 이용하여 조명에 위치한 광수신부에 전송하였다. 이러한 집광을 하는 경우 지향성이 너무 커서 IR-LED를 조명부 수신모듈에 정확히 향하지 않는다면 전송이 어렵게 되는 문제점이 있는데, 이를 해결하기 위해 여러 개의 IR-LED를 조금씩 다른 방향을 향하도록 배치하고, 수신부와 통신을 통해 이 중 최고의 전송성능을 보이는 IR-LED를 선택하는 방법을 제안하였다. 통신 성능을 주기적으로 감시하고, 성능이 저하되면 LED 재검색 과정을 통해 새롭게 최상의 성능을 보이는 LED로 통신을 교체하도록 한다.

• 한국기계가공학회지
• /
• 제15권6호
• /
• pp.70-76
• /
• 2016

Commercialization of surface lighting using Light Emitting Diodes (LED) has embraced the advance to Organic Light Emitting Diode (OLED) technology. This is necessary to achieve light-efficiency-improvement and longer component life. The range of application of LED lighting for both interior and outdoor lights has been gradually expanding. Automobiles and home appliances are now included. In the case of LED surface lighting in a domestic refrigerator, achieving high efficiency requires optimization of the number of LEDs in a pack. Optimization is also required in the design stage of development with regard to the conversion of the light source type from point light sources to the surface light type. This paper addresses these design problems. It presents a study of brightness variations for design solutions that differ from the existing technology in both the number of LED packages and use of Light Gathering Power (LGP) information. The intention is to facilitate production of high brightness LED surface lighting for domestic refrigerators.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.1017-1018
• /
• 2009

• Journal of Information Display
• /
• 제13권1호
• /
• pp.37-42
• /
• 2012

An empirical functional form was suggested for the analysis of the emission spectrum of high-power light-emitting diode (LED) consisting of a sharp blue peak from the LED chips and a broad yellow peak from the phosphor layer. The peak positions, half widths, shape parameters, and amplitudes of these two peaks were reliably obtained as a function of the temperature, and the results were discussed qualitatively in relation with the junction temperature. The adoption of an inert liquid was found to have significantly reduced the LED temperature and the color shift of the emitted light. The phenomenological approach used in this study may be helpful in the simulation of the LED spectrum under various thermal conditions, and may thus be helpful in the improvement of the device performance.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2017년도 추계학술대회
• /
• pp.220-221
• /
• 2017

초기의 LED(light emitting diode)는 광 출력이 낮아 각종 기계장치의 Table 시용 소자로 많이 사용되었으나, LED 기술의 발달로 고출력 고휘도로 색 Table 현이 가능하게 되었다. 따라서 교통 신호등, 대형 전광판, 자동차Table 시과 같은 디스플레이로 사용하고 있으며, 높은 광량을 요구하는 백열등, 형광등과 같은 실내외 조명에서도 LED가 사용되고 있다. 항로Table 지에 사용되는 등명기 또한 전구에서 LED로 교체되었으며, 초기의 해상용 LED 등명기는 다수의 LED를 사용하여 제작되었다. 하지만 고출력 LED의 개발로 광학 설계만 새롭게 한다면 소수의 LED만을 사용하더라도 해상용 LED 등명기에서 요구하는 광도 및 배광을 만족시킬 수 있다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.557-560
• /
• 2008

The main goal of this work is to fabricate light emitting diode (LED) module and apply it to mobile handset. We first fabricated the blue-color LED based on the AlInGaN cell structure with size of $200\;{\mu}m\;{\times}\;200\;{\mu}m$. Also we proposed a new $1.0\;mm\;{\times}\;0.5\;mm$ (1005size) packaging procedure for the LED cell. Thus the overall dimension of our LED cell was as small as $1.0\;mm\;{\times}\;0.5\;mm\;{\times}\;0.4\;mm$ ($W\;{\times}\;L\;{\times}\;T$). As far as we knew it was the first time that this small LED cell dimension had been fabricated and operated.