• Journal of Bio-Environment Control
• /
• v.25 no.4
• /
• pp.294-301
• /
• 2016

This study was conducted to analyze the seedling quality of korean melon and the growth after transplanting of korean melon nursed under the LED sources. LED sources were RB7 (Red:Blue=14:2), RB3 (Red:Blue=12:4) and Blue(B=16). Photosynthetic photon flux density(PPFD) was 50, 100 and $200{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$. The lighting treatment was started after graft-taken and was applied for 20 days at 4 hours(05:30 and 07:30, 17:30 and 19:30) per day. Plant height and stem diameter of scion were longer and thicker under a high ratio of blue light condition. Dry matter ratio and compactness were highest in RB3 compared to the other LED sources treatments. $CO_2$ exchange rate increased $5.44{\mu}molCO_2{\cdot}m^{-2}{\cdot}s^{-1}$ under RB7 $200{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ and dropped to negative values under control. PPFD $200{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ of RB3 resulted in the longest plant height by 132.3cm and flowering ratio also was the highest by 75%.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.459-460
• /
• 2006

RGB 3색 LED를 이용 백라이트에서는 백색 광원을 구현을 위해서는 혼색을 위한 충분한 공간 또는 광학계를 필요로 하고 있다. 본 연구에서는 RGB 3색 LED의 컬러 혼색을 위해 광학 설계를 진행을 하였고, 이 광학계는 광경로 변경을 통해 BLU 내부 공간에서 각각의 3색 LED가 충분한 혼색 구간을 확보하여 백색을 구현하게 된다. 최근 적용하고 있는 Side emitting 방식 LED가 아닌 Top view type의 power LED를 이용하여 32인치급 TV LCD 백라이트를 제작하여 최적화를 진행하였다.

• Journal of the Korean Vacuum Society
• /
• v.12 no.4
• /
• pp.235-238
• /
• 2003

Conventional LED displays use pixels which consist of red, green and blue LEDs of different operation voltages and degradation characteristics. Thus, the circuits are complicated and the display of each color changes independently with the operated time. In order to solve these drawbacks, an LED chip of a short wavelength and an LED lamp with the mixture of red, green, blue fluorescencers and epoxy on the LED chip were studied. The fluorescencers are excited by the light of the LED chip. The LED chip has an active layer of InGaN, a peak wavelength of 408 nm, a FWHM of 13 nm and the CIE index of (0.198, 0.087). White LED lamps were obtained and the CIE index change was observed with the change of the epoxy amount added to the fluorescencers.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.480-483
• /
• 2018

In this paper, we study the interference canceling and image sensing processing technology of multiple light sources for high speed transmission in CMOS sensor based visible light communication system. To improve transmission capacity in optical camera communications via image sensors, different data must be transmitted simultaneously from each LED. However, multiple LED light source environments for high-speed transmission can cause interference between adjacent LEDs. In this case, since the visible light communication system generally uses intensity modulation, when a plurality of LEDs transmit data at the same time, it is difficult to accurately detect the respective LEDs due to the light scattering interference of the adjacent LEDs. In order to solve this problem, the ON / OFF state of many LEDs of the light source is accurately recognized by using a dual CMOS sensor, and the spectral estimation technique and the pixel image signal processing technique of each LED are proposed. This technique can accurately recognize multiple LED pixels and improve the total average bit error rate and throughput of a MISO-VLC system.

• New Physics: Sae Mulli
• /
• v.68 no.11
• /
• pp.1268-1274
• /
• 2018

Aircraft-warning lights are lights that are used to inform pilots in flight about the presence of buildings or dangerous objects. Currently, the light sources of most aircraft-warning lights have been replaced by light-emitting diodes (LEDs). However, the aircraft-warning lights that are installed do not meet the optical performance standards and may cause airplane collisions. Therefore, the use of such light poses a risk to aviation safety. In order to solve this problem, we designed a Fresnel lens with the same luminous intensity distribution ovef $360^{\circ}$ direction; thus, we collimated the light beam from the LED light source with a narrow beam divergence angle in the form of an array of aspheric pieces. After that, we designed and simulated an aircraft-warning-light optical system with a center luminous intensity of 20,000 cd and a vertical divergence angle of $3^{\circ}$ or more by optimizing the lens' tilt and the distance between the LED and the Fresnel lens.

• Journal of Applied Biological Chemistry
• /
• v.62 no.2
• /
• pp.181-186
• /
• 2019

The optimum design of LED device for irradiation of 460 nm blue light on extruded rice cake using simulation and the effect of the blue light on the inactivation of Bacillus cereus (B. cereus) group on the rice cake were investigated. The irradiated light intensity patterns on the surface area of the sample were simulated with three different LED arrays (centered, cross, and evenly spaced) and at various distances (22, 32, 42 mm) between the LED modules and the sample. In addition, the uniformity was calculated as Petri factor. The evenly spaced array resulted the most uniform light intensity pattern in the simulation, and the Petri factor of 32 and 42 mm of the distances showed higher than 0.9, which represents the ideal uniformity of LED device. The bacterial population of the rice cake decreased to less than the initial bacterial population during exposure to LED blue light, whereas the bacterial population of the control sample increased. The bacterial count of the rice cake after blue light irradiation for 24 h was 1.21 log CFU/g lower than the control sample. Petri factor increased with increase of the distance between the light source and sample, however, the reduction rate of B. cereus group decreased. Therefore, the design of LED device, that represented the Petri factor higher than 0.9 and inactivated the population of B. cereus group, with evenly spaced and 32 mm of distance between the light source and sample was suitable for extending shelf-life of rice cake.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.10a
• /
• pp.332-334
• /
• 2012

This study investigates records about state systems which were installed to manage aids to navigation workings related to ship and navigation in Korea. It shows the transition process from signal-fire that was used for safe sailing in the three kingdom period to the oil lamp, acetylene gas light, electric light and the LED lamp have been used as a light source for the lighthouses since the modern age.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2015.10a
• /
• pp.315-316
• /
• 2015

LED 광원용 해상용 등명기의 동향을 조사해 보았으며, 최근 수요가 증가하고 있는 LED-300 등명기의 특성을 업체별 색상별로 통계화하여 부동광도 특성 및 소비전력 특성의 차이점 등을 분석했다. 이를 통해 현단계의 문제점 및 개선 방향에 대해 언급하였다.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.3
• /
• pp.11-18
• /
• 2004

2003년 1월 27일 유럽의회 심의 법령 (2002/95/EC) RoHS(특정 유해 물질의 사용에 대한 규제) 6개 물질(수은, 납, 카드늄, 6가 크롬, PBB, PBDE)의 사용 규제가 조명기기를 포함한 전기전자기기에서 2006년 7월부터 실시될 예정인 바 앞으로의 광원류는 이를 해결해야 할 것으로 본다. 이를 해결하기 위한 대표적인 광원이 LED(light emitting diode)라고 볼 수 있을 것이다. 그림 1은 1879년 최초의 조명용 백열구를 시작으로 1990년대 말 무전극 PLS (Plasma lighting system) 및 LED램프를 시대별로 나타낸 것이다. (중략)

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.11a
• /
• pp.43-45
• /
• 2023

현재 운용 중인 전구식 회전식 등명기의 운용현황과 문제점을 알아보고, 이를 개선하기 위한 개선 방향을 검토 후 가장 근본적인 문제 해결을 위한 전구를 대체할 새로운 광원으로 LED를 선정하고 선정된 새로운 광원을 이용한 고광도의 LED 회전식 등명기의 개발에 따른 장점과 기존의 규정 및 검사 방식에 대한 의견을 제시한다.