• Journal of IKEEE
• /
• v.22 no.1
• /
• pp.189-192
• /
• 2018

This study focused on the development of simulation methodology and design optimization for the DBR(Distributed Bragg Reflectors) structures, which are commonly used in manufacturing optical films and the key components of LED chip and LCD inspection equipments. From the multi-layer simulation, the following results are obtained. First, the wavelength(nm) vs. reflectance(%) can be calculated in the DBR structures that $TiO_2$ and $SiO_2$ thin films are stacked alternately. As a results, it is suggested that highly efficient DBR structures can be designed and manufactured using simulation methodology.

• Korean journal of food and cookery science
• /
• v.15 no.1
• /
• pp.37-41
• /
• 1999

Colored rice (Suwon 45) flour was evaluated as a bread flour by the addition of 10% gluten on 3% hydroxypropyl methyl cellulose to check the processing adaptability. Both of these additives led to a successful formation of rice bread. Textural characteristics of colored rice bread crumb baked with 3% hydroxypropyl methyl cellulose revealed lower hardness and chewiness, however, the one with 10% gluten revealed the higher springiness. The retrogradation of colored rice bread during storage was not significantly different from that of wheat bread. Sensory evaluation showed that the crumb texture of bread baked with 3% hydroxypropyl methyl cellulose had softer texture and poor distribution of air-pore size but its springiness was not significantly different from that of wheat bread.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.7
• /
• pp.573-577
• /
• 2002

A tape feeder of a SMD(Surface Mount Device) mounter is a device that sequentially feeds electronic components on a tape reel to the pick-up system of the mounter. As components are getting much smaller, feeding accuracy of a feeder becomes one of the most important factors for successful component pick-up. Therefore, it is critical to keep the feeding accuracy to a specified level in the assembly and production of tape feeders. This paper describes a tape feeder inspection system that was developed to automatically measure and inspect feeding accuracy using machine vision. It consists of a feeder base, an image acquisition system, and a personal computer. The image acquisition system is composed of CCD cameras with lens, LED illumination systems, and a frame grabber inside the PC. This system loads up to six feeders at a time and inspects them automatically and sequentially. The inspection software was implemented using Visual C++on Windows NT with easily usable GUI. Using this system, we can automatically measure and inspect the quality of all feeders in production process by analyzing the measurement results statistically.

• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.668-670
• /
• 1999

We have developed a automatic surface inspection system for cold Rolled strips in steel making process for several years. We have experienced the various kinds of surface inspection systems, including linear CCD camera type and the laser type inspection system which was installed in cold rolled strips production lines. But, we did not satisfied with these inspection systems owing to insufficient detection and classification rate, real time processing performance and limited line speed of real production lines. In order to increase detection and computing power, we have used the Dark Field illumination with Infra_Red LED, Bright Field illumination with Xenon Lamp, Parallel Computing Processor with Area typed CCD camera and full software based image processing technique for the ease up_grading and maintenance. In this paper, we introduced the automatic inspection system and real time image processing technique using the Object Detection, Defect Detection, Classification algorithms. As a result of experiment, under the situation of the high speed processed line(max 1000 meter per minute) defect detection is above 90% for all occurred defects in real line, defect name classification rate is about 80% for most frequently occurred 8 defect, and defect grade classification rate is 84% for name classified defect.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.5 no.2
• /
• pp.110-116
• /
• 2006

Lesion of the superior glenoid labrum and the insertion of the biceps tendon are a common cause for shoulder pain in patients performing overhead sports. Medial shearing stress during overhead throwing may cause biceps instability and associated rotator cuff problem aggravates the symptoms. Careful attention to the history and physical examination and may arouse suspicion of injury to the biceps tendon and the superior labral complex. Progress in shoulder arthroscopy has led to the identification of the lesion and normal variation. Treatment should be directed according to the type of lesion and related symptoms.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.5
• /
• pp.8-14
• /
• 2008

For nondestructive inspection of electron beam (EB) welding part in automotive power transmission assembly, a pulse-echo ultrasonic testing apparatus in water immersion has been applied using the ultrasonic waves with a frequency of 10MHz. However various problems have appeared during the ultrasonic inspection, which led to some significant mistakes in automatic quality evaluation of the welding parts. Experimental study showed that the state of water couplant medium containing some amount of contaminants, rusts and anti-corrosion agents had considerable influences on the reduction of ultrasonic amplitudes during wave propagation. The amplitude reduction depending on the coupling medium state could bring about some mis-diagnoses for defects in the welding parts. The results proposed that for a reliable inspection of defects in welds the state of water medium should be kept in about 15 volume fractions (vol.%) of anti-corrosion agents and in minimized contaminants.

• Tuberculosis and Respiratory Diseases
• /
• v.56 no.3
• /
• pp.302-307
• /
• 2004

Aspergilloma and Allergic Bronchopulmonary Aspergillosis(ABPA) are different types of the pulmonary aspergillosis spectrum of diseases. ABPA is an inflammatory disease that causes hypersensitivity to Aspergillus spores growing in the bronchi, which is characterized by asthma, recurrent pulmonary infiltrations or mucoid impaction, eosinophilia and central bronchiectasis. Aspergilloma is a simple colonization of fungus within a cavitary lung lesion, but these diseases rarely coexist. A case of ABPA, coexistent with Aspergilloma, was experienced in a 31 year-old female. The diagnosis was confirmed by the immediate cutaneous reactivity to Aspergillus fumigatus, elevated total IgE antibodies, peripheral eosinophilia, bronchiectasis, growth of Aspergillus species in a sputum culture and radiographic infiltration. Treatment, with prednisone and itraconazole, led to improvement of the respiratory symptoms, reduction of the cavitary lesion and in the total serum IgE level.

• Journal of The Korean Society of Inherited Metabolic disease
• /
• v.22 no.1
• /
• pp.9-14
• /
• 2022

Glutaric aciduria type 1 (GA1; OMIM #231670) is a rare autosomal recessive inherited neurometabolic disorder caused by the deficiency of glutaryl-CoA dehydrogenase. Infantile-onset GA1 is the most common form characterized by striatal injury and progressive movement disorder, and it is often triggered by an acute encephalopathic crisis within the first three years of life. Once this crisis occurs, there is a high likelihood for ineffective or limited conventional interventions, neurological disorders, or even death. Therefore, early diagnosis and immediate preventive management, such as dietary therapy, is essential. In the past decades, newborn screening (NBS) by tandem mass spectrometry for GA1 has been largely introduced in many countries including Korea, and it has led to improvements in the neurological outcomes of patients with GA1. In this review, the clinical symptoms, natural histories, and outcomes before and after the introduction of NBS in patients are discussed.

• Journal of Sensor Science and Technology
• /
• v.32 no.2
• /
• pp.124-130
• /
• 2023

Implementing flexible production systems in domestic and foreign automotive design parts assembly has increased demand for automation and power reduction. Consequently, transition to a hybrid production method is observed where multiple vehicles are assembled in a single assembly line. Multiple robots, 3D vision sensors, mounting positions, and correction software have complex configurations in the automotive glass mounting system. Hence, automation is required owing to significant difficulty in the assembly process of automobile parts. This study presents a primer lighting and inspection algorithm that is robust to the assembly environment of real automotive design parts using high power 'ㄷ'-shaped LED inclined lighting. Furthermore, a 2D camera was developed in the primer coating inspection system-the core technology of the glass mounting system. A primer application demo line applicable to the actual automobile production line was established using the proposed high power lighting and algorithm. Furthermore, application inspection performance was verified using this demo system. Experimental results verified that the performance of the proposed system exceeded the level required to satisfy the automobile requirements.

• Korean journal of food and cookery science
• /
• v.14 no.2
• /
• pp.168-176
• /
• 1998

The breadmaking characteristics of composite flour containing 30% of buckwheat and 70% of wheat with the addition of vital wheat gluten and water-soluble gums, were studied to establish the optimum formula for the development of buckwheat bread. The addition of vital wheat gluten or/and gums led to successful formation of buckwheat bread, giving loaf volume increase and improvement of sensory quality, especially texture determined by QDA (Quantitative Descriptive Analysis). Among those additives, xanthan gum showed the best volume expansion. Synergistic effects on bread quality were observed when the vital wheat gluten and xanthan gum or guar gum were used together. As buckwheat flour was substituted for wheat flour, gelatinization started early and the maximum viscosity increased measured by an amylography. The addition of gluten and gums caused the initial gelatinization to occur at a higher temperature and maximum viscosity to decrease.