• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.33 no.4
• /
• pp.275-284
• /
• 1997

This experiment was carried out to measure the sinking depth of each buoy, the change in the net shape of the net, and the tension of sand bag line according to the R (from bag net to the fish court) and L (from fish court to the bag net) current directions and their velocity by the model experiment. The model net was one-fiftieth of the real net, and its size was determined after considering the Tauti’s Similarity Law and the dimension of the experimental tank. 1. The changes of the net shape were as follows : In the current R, the end net of fish court moved 20mm down the lowerward tide and 10mm upper part. So the whole model net moved up at 0.2m/sec. The shape of the net showed an almost linear state from bag net to the fish court at 0.6m/sec. In the current L, the door net moved 242mm down the lowerward tide and 18mm upper part. So the whole model net moved up at 0.2m/sec. The net shape showed an almost linear state from the fish court to the bag net at 0.5m/sec. 2. The sinking depths of each buoy were as follows: In the current R, the head buoy started sinking at 0.2m/sec and sank 20mm, 99mm at 0.3m/sec and 0.6m/sec, respectively. The end buoy didn't sink from 0m/sec to 0.6m/sec but showed a slight quake. In the current L, the end buoy started sinking at 0.1m/sec, and sank 5mm and 108mm at 0.2m/sec and 0.6m/sec, respectively. The whole model net sank at 0.5m/sec except the head buoy. 3. The changes of the sand bag line tension were as follows: In the current R, the tension affected by the sand bag line of the head buoy showed 273.51g at 0.1m/sec increased to 1298.40g at 0.6m/sec. In the current L, the tension affected by the sand bag line of the end buoy on one side showed 137.08g at 0.1m/sec increased to 646.00g at 0.6m/sec. The changes in the sand bag line tension were concentrated on the sand bag line of the upperward tide with increasing velocity at the R and L current directions. However, no significant increase in tension was observed in the other sand bag lines.

• Journal of Life Science
• /
• v.20 no.11
• /
• pp.1662-1666
• /
• 2010

Growth and other biological processes in aquatic organisms are particularly dependent on water temperatures. This study examined the effects of water temperature on the growth of Triops longicaudatus. The influence of water temperature fluctuations was that growth rate was increased at higher temperatures. The mean carapace length was 5.7 (${\pm}2.1$) mm in a water temperature of $20^{\circ}C$ and 7.5 (${\pm}0.5$) mm in a water temperature of $28^{\circ}C$ on the 14th day after submergence. It was 6.9 (${\pm}2.8$) mm in a water temperature of $20^{\circ}C$ and 7.8 (${\pm}2.0$) mm in a water temperature of $28^{\circ}C$ on the 21st day after submergence. The mean carapace length grew rapidly within 14 days after submergence, but increase in carapace length beyond this time was slow. The influence of water depth fluctuations was low as the mean carapace length was 9.3 (${\pm}2.1$) mm under a water depth of 80 mm and 9.5 (${\pm}1.3$) mm under a water depth of 190 mm on the 19th day after submergence. Biomass showed that the carapace length of 5, 10, 16 and 20 mm was a dry-weight of 1.1 (${\pm}0.3$), 18.0 (${\pm}3.7$), 26.0 (${\pm}0.0$) and 52.3 (${\pm}4.0$) mg respectively. The number of eggs increased rapidly with increments in carapace length. The mean number of eggs was 20 (${\pm}0.0$) at a carapace length of 7.0 mm, but at a carapace length of 17.0 mm, the mean number of eggs was 560 (${\pm}0.0$). The results suggested that differences in water temperature accounted for the differences in length of the carapace and the number of eggs.

• Journal of Korean Academy of Nursing
• /
• v.22 no.1
• /
• pp.49-67
• /
• 1992

Most hospitalized children will experience physical pain as well as psychological distress. Preschool children's pain perception related to painful procedures can increase due to elevated anxiety and fear because they do not have understanding logical of their disease and hospitalization. In particular, they are distressed about needle - related procedures which are feared because they are seen to be a cause of bodily damage. This descriptive study attempted to identify pain perception levels in preschool children and their mothers. A self-reporting measurement and behavioral observation were used to collect the data. A total of 25 hospitalized preschool children and their mothers were investigated and data were collected about 60 painful procedures. Data collection was carried out by the researcher and two trained investigators from November first to December tenth. Three insruments were used to collect the data : Faces Pain Rating Scale(FPRS) developed by Beyer was used to measure the degree of preschool children's pain perception about painful procedures. The Visual Analogue Scale(VAS) devised by Huskisson was used to assess the degree of mothers' pain perception about their children's painful procedures. A Pain Behavioral Checklist based on the Procedure Behavior Check List by LeBaron and Zelter and modified by the researcher was used to observe behaviors of preschool children, their mothers, and nurses when the painful procedures took place. The data were analyzed by an SPSS program, and were tested using real numbers, percentages, Pearson correlation coefficient, t-test, and ANOVA. The results of this study are as follows : 1. Of all the painful procedures, the mean score for the FPRS for the preschool children's pain perception was 4.02 points, and the mean score for the VAS of mothers' pain perception was 10.92 points. 2. A Positive correlation which was statistically significant was found between the pain perception of preschool children and their mothers (r＝.53, p＜.01). that is, the higher the children's pain perception was, the higher their mothers' pain perception was. 3. The characteristics of the painful procedures related with children's pain perception as follows : The type of painful procedure was found to be statistically significant (F＝23.44, p＜.01), Among the three procedures Ⅳ starting was found to be perceived as the most painful procedures to the children. The greater the number of times that the procedure had been done, the higher the pain perception was (F＝4.44, p＜.01), and the longer the duration of the procedure, the higher the pain perception wa(r＝.30, p＜.05). Pain perception in the treatment room was higher than in the children's room(t＝6.30, ＜.01), pain perception in the mother's presence was the higher than when the mother was not present (t＝2.91, p＜.01). 4. The characteristics of the painful procedures related with the mothers' pain perception as follows : The type of painful procedure was found to be statistically significant(F＝6.01, p＜.01). Among the three procedures Ⅳ sampling was found to be perceived as the most painful procedures to the mothers. The greater the number of times that the procedure had been done, the higher the pain perception was (F＝5.95, p＜.01), and the longer the duration of the procedure, the higher the pain perception was (r＝.31, p＜.05). Pain perception in the treatment room was higher than in the children's room (t＝3.51, p＜.01), but pain perception in the mother's presence showed statistically significant no difference. 5. Of all of the 19 children's behaviors during the painful procedures, the most frequent behaviors observed Were as follows in order of frequency “crying”, “screamirig”, “facial grimacing”, “physical resistance”, Of all of the nine methers' behaviors, the most frequent by observed in “console children”, “hold children”, “applaud children”, Of all of the 11 nurses' behaviors during the painful procedures, the mast frequent in order were “smiling”, “physical restraint”, “console children”, “praise children”. 6. A positive correlation between children's and mothers' pain perception and children's behaviors was found to be statistically significant (r＝.65, p＜.01, r＝67, p＜.01). Also the relationship between children's and mothers' pain percertion, and mothers' behavior was found to be statistically significant (r＝.57, p＜. 01, 4＝.60, p＜.01). The relationship between children's pain perception and nurses' behaviors was also found to be statistically significant (r＝.46, p＜.01), but there was difference between mothers' pain perception and nurses' behaviors.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.4
• /
• pp.75-82
• /
• 2019

Flexible solar cells have attracted enormous attention in recent years due to their wide applications such as portable batteries, wearable devices, robotics, drones, and airplanes. In particular, the demands of the flexible silicon and compound semiconductor solar cells with high efficiency and high reliability keep increasing. In this study, we fabricated a flexible InGaP/GaAs double-junction solar module. Then, the effects of the wind speed and ambient temperature on the operating temperature of the solar cell were analyzed with the numerical simulation. The temperature distributions of the solar modules were analyzed for three different wind speeds of 0 m/s, 2.5 m/s, and 5 m/s, and two different ambient temperature conditions of 25℃ and 33℃. The flexibility of the flexible solar module was also evaluated with the bending tests and numerical bending simulation. When the wind speed was 0 m/s at 25 ℃, the maximum temperature of the solar cell was reached to be 149.7℃. When the wind speed was increased to 2.5 m/s, the temperature of the solar cell was reduced to 66.2℃. In case of the wind speed of 5 m/s, the temperature of the solar cell dropped sharply to 48.3℃. Ambient temperature also influenced the operating temperature of the solar cell. When the ambient temperature increased to 33℃ at 2.5 m/s, the temperature of the solar cell slightly increased to 74.2℃ indicating that the most important parameter affecting the temperature of the solar cell was heat dissipation due to wind speed. Since the maximum temperatures of the solar cell are lower than the glass transition temperatures of the materials used, the chances of thermal deformation and degradation of the module will be very low. The flexible solar module can be bent to a bending radius of 7 mm showing relatively good bending capability. Neutral plane analysis was also indicated that the flexibility of the solar module can be further improved by locating the solar cell in the neutral plane.

• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.625-628
• /
• 2015

POLARBEAR is a ground-based experiment located in the Atacama desert of northern Chile. The experiment is designed to measure the Cosmic Microwave Background B-mode polarization at several arcminute resolution. The CMB B-mode polarization on degree angular scales is a unique signature of primordial gravitational waves from cosmic inflation and B-mode signal on sub-degree scales is induced by the gravitational lensing from large-scale structure. Science observations began in early 2012 with an array of 1.274 polarization sensitive antenna-couple Transition Edge Sensor (TES) bolometers at 150 GHz. We published the first CMB-only measurement of the B-mode polarization on sub-degree scales induced by gravitational lensing in December 2013 followed by the first measurement of the B-mode power spectrum on those scales in March 2014. In this proceedings, we review the physics of CMB B-modes and then describe the Polarbear experiment, observations, and recent results.

• Journal of Preventive Medicine and Public Health
• /
• v.27 no.3 s.47
• /
• pp.447-463
• /
• 1994

Despite the public health importance of injury and poisoning in terms of its high mortality and incidence, epidemiologic information to be utilized are scarce in Korea. This study was carried out in 1990 on a representative sample population (about 55,000 persons) along with the 6th National Tuberculosis Prevalence Survey in order to estimate the magnitude of injury and poisoning occurrence and to identify its epidemiologic characteristics which can be aided for establishing preventive strategy. Pre-tested and structured Questionnaire was used by trained interviewer to collect data including general information of the person, various information on the injury and poisoning during the past one year such as time and place of its occurrence, its nature and external causes, type of medical institute attended, duration of treatment and outcome of the accident occured. In analysis of the data collected incidence rates per 1000 persons by sex, age group and its nature as well as external causes, and relative frequencies were calculated. The result obtained are as followings; 1. The incidence rate per 1000 was 30 for both sexes, 39 for male and 22 for female, male being 1.8 times more frequent than female. Age adjusted incidences were not much different from the crude rates. Age group specific rate curve showed bimodal shape in both sexes, small peaks in preschool children and higher peaks in older ages. The incidence rate per 1000 people by area was highest in Jeon-bug province (57/1000) and the lowest in Daegu city(11/1000). 2. The place where the injuries occured were road in 46%, within the boundary of house in 25%, and working place in 12% The injuries and poisoning had occured more frequently during the months from March to August of the year than other months. 3. The relatively frequent injuries by its nature were contusion with intact skin surface (19%), fracture of upper limb (13%), open wound of head, neck and trunk (12%) and fracture of lower limb (11%) among males; contusion with intact skin surface (28%), sprains and strains of joints and adjacent muscle (14%), fracture of upper limb (10%) and fracture of lower limb (9%) among females. Higher incidence rate among males than females were fracture of skull (4.5 times), open wound and fractures of limbs ($2{\sim}3$ times). Age specific rate of injuries and poisoning by its nature showed increasing pattern by age in fractures of upper and lower limbs and sprains & strains of joints whereas the age group of 30's showed highest incidence in open wounds of upper limb. Fractures of radius and ulna in upper limb, fractures of tibia & fibula and ankle in lower limb were most frequent among fractures of upper and lower limbs. The frequent injuries among sprains and strains of joints and adjacent muscles were that of ankle, foot and back, and among open wound were that of head and fingers. 4. Relative frequency of injuries and poisoning by external causes showed following order : other accidents (25%), accidental falls (23%), motor vehicle accident (22%) and other road vehicle accident (14%) among males and accidental falls (37%), motor vehicle accident (24%) and other accident (18%) among females. The external causes revealing higher incidences among males than females, were other road vehicle accident (4.8 times), vehicle accident not elsewhere classifiable (4.4 times), accidental poisoning (4.4 times), accidents due to natural and environmental factors (2.8 times), and sucide & self-inflicted injuries (2.8 times). Age specific incidence by external causes for frequent injuries showed that incidence of other accident steadily increased from 10's till age 50's; motor vehicle traffic accident increased from age 20's and dropped after age 60's; on the other hand accidental fall increased strikingly by age. The most frequent external causes among motor vehicle traffic accidents was motor vehicle traffic accident involving collision with pedstrain (69%), pedal cycle accident (30%) and other road vehicle accident (71%) among other road vehicle accidents; falls on same level from slipping, tripping or standing (44%) and other falls from one level to another among accidental falls; accidents caused by machinary (32%) for male and striking against or struck accidentally by objects or person for female among other accidents. 5. Seventy nine percent of the injuries and poisonings were treated in general hospital or hospital/clinic. The duration of treatment ranged from a few days to 123 weeks; the majority(52%) took under 2 weeks, 36% for $3{\sim}8$ weeks and 4% over 21 weeks. 6. The accident resulted in full recovery of normal healthy state in 62%, residual functional defects in 21% and on process of treatment in 16%.

• Archives of design research
• /
• v.12 no.4
• /
• pp.231-241
• /
• 1999

This study propose to analyze the design method and the form elements of museums, of works by Richard Meier, and through the analysis, spacial characteristics of museums will be understood. The museum works of Richard Meier, as an exhibition space, not only display the art works efficiently, but they also offer visitors the opportunity to experience the art of architecture, as a cultural space. Richard Meier, when working on the projects, has utilized the design methods and the architectural language, learned from Mies van der Rohe and Le Corbusier, resourcefully. Having the structural grid as basis, the rational rectangular forms were intended for exhibition space, while the circular and partial circular forms of geometry were utilized in formative space. This was able to maintain the balance between functional and formative space. In the museums of his works, the ramp and the glass wall separated from the structure become very important means of expression. The ramps, not only make people to enjoy the interior and exterior of museum, but also able them to see the works of art from different distances and angles repeatedly and the large glass wall reveals the various shapes of interior to exterior. In comparing with the design method and language of two masters mentioned, the design principles and elements, developed by Meier were applied to the site plans, exhibition space planning and elevations to manifest its originality. The design concept, derived from the urban fabric and historical buildings around, gave harmony to the museum with its surroundings, and employing the deformed axis brought variation and the effect of diversion to the site plan. The exhibition space is much vitalized by the well arrangement of various exhibition fixtures in the museum. The exhibion fixtures, which the partitions, shelves, miches, and stages were put together in flexibility, play multiple roles as partitions dividing spaces, as furniture displaying art works, and as elements creating forms. The systematically arranged fixtures, also produce several visual axes and centers, which have visitors appreciate the works of art in various perspectives, hence create a unique environment.

• Korean Journal of Environmental Biology
• /
• v.27 no.1
• /
• pp.124-133
• /
• 2009

The study was performed to investigate the community structure of macrobenthic fauna during June 2005, in Hallyeohaesang National Park from Korea Strait. A total of 284 macrobenthic fauna were collected. The overall average macrobenthic density and biomass were 2,002 individuals m$^{-2}$ and 154.92 gWWt m$^{-2}$, respectively. Based on the Lebris (1988) index, there were 20 species accounting for approximately 47.64% of total individuals. And the highest densities were found in the polychaetes Scoletoma longifolia, Isolda pulchella, Mediomastus californiensis, Minuspio multibranchia, Tharyx sp. 1 and the bivalve Theora fragilis. On the other hand, the top twenty species made up 70.47% of the total biomass while the three most abundant, the echinoderms Schizaster lacunosus, Amphiura vadicola and the bivalve Fulvia mutica. The conventional multivariate statistics (cluster analysis and non-metric Multi-Dimensional Scaling) applied to assess spatial variation in macrobenthic assemblages. As a result of cluster analysis and nMDS ordination, this study area was divided into two different groups of stations and species. In case of station, there are two groups: one is a mud dominated station group and the other is dead shell and sand dominated group. And the 2 faunistic groups were established as follows: 1) a group of relatively higher abundances in mud dominated sediment. There were numerically dominated by the polychaetes Magelona japonica, Sternaspis scutata, Paraprionospio pinnata, Tharyx sp. 1 and the amphipods Monocorophium sinense and Eriopisella sechellensis. 2) a group of relatively higher densities dead shell and sand dominated sediment. These groups were characterized by the polychaetes I. pulchella, M. multibranchiata, the amphipods M. acherusicum, Gammaropsis japonicus and the echinoderm A. vadicola.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.8 no.2
• /
• pp.45-53
• /
• 2006

The objectives of this study are to determine the primary yield components responsible for yield differences in a subtropical environment of the Hunan province China and in a temperature environment of Honam province Korea. Field experiments were conducted in a subtropical environment in Hunan province China during 2002 and in a temperate environment in Honam province Korea during 2003. Seven rice cultivars were grown under optimum crop management in each experiment field. Yield, yield components and plant dry matter were determined at maturation. The highest yield (567 kg/10a) was produced at Honam province by Jinyou 207, a Chinese cultivar, The maximum yield at Hunan province was 453 kg/10a by Sanyou 63. On the average across cultivars, Honam produced 23% greater yields than Hunan. Sink size (spikelets per $m^2$) was responsible far these yield differences. Panicle number per $m^2$ was much greater at Honam.

• Journal of Intelligence and Information Systems
• /
• v.25 no.4
• /
• pp.53-65
• /
• 2019

Object tracking is one of important steps to achieve video-based surveillance systems. Object tracking is considered as an essential task similar to object detection and recognition. In order to perform object tracking, various machine learning methods (e.g., least-squares, perceptron and support vector machine) can be applied for different designs of tracking systems. In general, generative methods (e.g., principal component analysis) were utilized due to its simplicity and effectiveness. However, the generative methods were only focused on modeling the target object. Due to this limitation, discriminative methods (e.g., binary classification) were adopted to distinguish the target object and the background. Among the machine learning methods for binary classification, total error rate minimization can be used as one of successful machine learning methods for binary classification. The total error rate minimization can achieve a global minimum due to a quadratic approximation to a step function while other methods (e.g., support vector machine) seek local minima using nonlinear functions (e.g., hinge loss function). Due to this quadratic approximation, the total error rate minimization could obtain appropriate properties in solving optimization problems for binary classification. However, this total error rate minimization was based on a batch mode setting. The batch mode setting can be limited to several applications under offline learning. Due to limited computing resources, offline learning could not handle large scale data sets. Compared to offline learning, online learning can update its solution without storing all training samples in learning process. Due to increment of large scale data sets, online learning becomes one of essential properties for various applications. Since object tracking needs to handle data samples in real time, online learning based total error rate minimization methods are necessary to efficiently address object tracking problems. Due to the need of the online learning, an online learning based total error rate minimization method was developed. However, an approximately reweighted technique was developed. Although the approximation technique is utilized, this online version of the total error rate minimization could achieve good performances in biometric applications. However, this method is assumed that the total error rate minimization can be asymptotically achieved when only the number of training samples is infinite. Although there is the assumption to achieve the total error rate minimization, the approximation issue can continuously accumulate learning errors according to increment of training samples. Due to this reason, the approximated online learning solution can then lead a wrong solution. The wrong solution can make significant errors when it is applied to surveillance systems. In this paper, we propose an exactly reweighted technique to recursively update the solution of the total error rate minimization in online learning manner. Compared to the approximately reweighted online total error rate minimization, an exactly reweighted online total error rate minimization is achieved. The proposed exact online learning method based on the total error rate minimization is then applied to object tracking problems. In our object tracking system, particle filtering is adopted. In particle filtering, our observation model is consisted of both generative and discriminative methods to leverage the advantages between generative and discriminative properties. In our experiments, our proposed object tracking system achieves promising performances on 8 public video sequences over competing object tracking systems. The paired t-test is also reported to evaluate its quality of the results. Our proposed online learning method can be extended under the deep learning architecture which can cover the shallow and deep networks. Moreover, online learning methods, that need the exact reweighting process, can use our proposed reweighting technique. In addition to object tracking, the proposed online learning method can be easily applied to object detection and recognition. Therefore, our proposed methods can contribute to online learning community and object tracking, detection and recognition communities.