• 한국기계가공학회지
• /
• 제14권2호
• /
• pp.31-37
• /
• 2015

Recently, mobile phones have become necessary tools for everyday life. In this study, a device that can serve as a separation between a touch panel and an LCD module in a mobile phone was devised for mass repair processes at a smaill business. We used a wire cutting method to separate the bonding plate area between the modules. The device is composed of DC motors and stepping motors that can deliver a precise cutting motion. The motor control system is connected by individual control modules to a CAN network. The developed device showed excellent performance at high temperature conditions.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.383-388
• /
• 2004

In this paper an alternative Active Matrix LCD technology is described with scalable, low cost processing. The Dual Select Diode AMLCD requires 60% lower capital investment in the array process than a-Si TFT arrays and results in 20% lower cost LCD modules. Development at several AMLCD manufacturers is in progress.

• 한국산학기술학회논문지
• /
• 제11권1호
• /
• pp.13-20
• /
• 2010

본 연구의 목적은 Display 산업의 중요성에 주목하여 옥외 광고를 위한 LCD 패널용 콘솔(이하 'LCD 콘솔'이라 한다.)을 개발하는데 있다. 본 연구의 핵심 과제는 LCD 콘솔의 내부온도를 제어할 수 있도록 해주는 냉각시스템(Cooling System)을 개발하는 것이다. 냉각시스템은 상용화되어 있는 냉각휀(Cooling Fan), 히트싱크(Heat sinks), 열전소자(Thermo Electronic Module) 등의 제품들을 시스템적으로 통합시키는 응용기술로서 통계적 검정기법을 적용하여 개발되었다. 본 연구는 먼저 냉각시스템을 설계/제작한 후 실험을 통하여 냉각시스템 제어에 필요한 인자들의 설정 값들을 구하는 과정을 보였다. 이어서 개발된 냉각시스템을 이용하여 46인치 LCD Panel이 탑재된 LCD 콘솔을 설계/제작하고 실험을 통하여 완성품 LCD 콘솔의 성능을 확인하는 과정을 보였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 A
• /
• pp.59-62
• /
• 2003

The purpose of this paper is to present how to implement Segment_LCD display using SoC design. The SoC design is achieved by using an ARM_based Excalibur device. The Excalibur device offers an outstanding embedded development platform with ARM922T and FPA. The design in the Excailbur device uses the embedded AR띤 Processor core and the AMBA high-performance bus (AHH) to write to a memory-mapped slave peripheral in the FPGA portion of the device. Here, Segment_LCD is one kind of memory-mapped slave peripherals. In order to Implement the Segment_LCD display based on SoC design, four steps are fellowed. At first, IP modules are made by using Verilog HDL. Secondly, the ARM processor of the Excalibur is programmed using C in ADS (ARM Developer Suite). And in the third step, the whole system is simulated and verified. At last, modules are downloaded to SoCMaster kit. Both Quartus II software and ModelSim5.5e software are the key software tools during the design.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2007년도 추계종합학술대회
• /
• pp.754-757
• /
• 2007

본 논문은 감마 곡선 최적화를 이용한 자동 LCD 감마 제어 시스템을 제안한다. 이러한 시스템은 평균 감마 요차와 감마 조정 시간을 줄이기 위해 모바일 LCD 구동 IC 내의 감마 조정 레지스터들을 자동적으로 제어한다. 제안된 감마 시스템은 측정 대상이 되는 모률 (MUT, LCD 모듈), 프로그램화된 개인용 컴퓨터, 휘도 측정용 멀티미디어 디스플레이 측정기 및 퍼스널 컴퓨터와 LCD 모듈간의 인터페이스용 제어 보드로 구성되어 있다. 창조 감마 곡선과의 6-점 프로그램 정합 기술을 이용하여 새로이 개발된 알고리즘을 제안한다. 개발된 알고리즘과 프로그램은 범용 LCD 모듈에 적용가능하다.

• 반도체디스플레이기술학회지
• /
• 제9권3호
• /
• pp.59-63
• /
• 2010

This paper proposes computer visual inspection algorithms for various LCD defects which are found in a manufacturing process. Modular vision processing steps are required in order to detect different types of LCD defects. Those key modules include RGB filtering for pixel defects, gray-scale morphological processing and Hough transform for line defects, and adaptive threshold for spot defects. The proposed algorithms can give users detailed information on the type of defects in the LCD panel, the size of defect, and its location. The machine vision inspection system is implemented using C language in an embedded Linux system for a high-speed real-time image processing. Experiment results show that the proposed algorithms are quite successful.

• 제어로봇시스템학회논문지
• /
• 제15권3호
• /
• pp.323-329
• /
• 2009

This paper presents an automatic LCD gamma control system using gamma curve optimization. It controls automatically gamma adjustment registers in mobile LCD driver IC to reduce gamma correction error and adjusting time. The proposed gamma system contains Module-Under-Test (MUT, LCD module), PC installed with program, multimedia display tester for measuring luminance, and control board for interface between PC and LCD module. Proposed algorithm and program are applicable for most of the LCD modules. It is realized to calibrate gamma values of 1.8, 2.0, 2.2 and 3.0. The control board is designed with DSP and FPGA, and it supports various interfaces such as RGB and CPU. Developed automatic gamma control system showed significantly reduced gamma adjusting time of 240 sec. and much less average gamma error of 11% than 42h and 27% with conventional manual method. We believe that the proposed system is very useful to provide high-quality LCD and to improve production process.

• 한국산학기술학회논문지
• /
• 제13권8호
• /
• pp.3618-3622
• /
• 2012

본 연구에서는 LCD 생산라인에서 장기적으로 정체상태에 있는 모듈의 수율을 높이고, 현재 TFT-LCD 생산공정에 필수적인 고압의 실리콘주입 장비 및 정밀 제어시스템을 개발하였다. 본 개발을 통하여 향후 본격생산을 준비중인 차세대 디스플레이 생산라인뿐만 아니라 중국으로 이전중인 LCD 생산 설비의 라인 환경에서 장비의 효율을 최대한 발휘함으로써 신규 투자비용을 최소화하고 최대의 효과를 창출할 수 있도록 세부 동작 시퀀스를 제어하기 위한 H/W와 S/W 시스템을 생산라인에 실장하였다. 또한, Fast-evacuating을 위한 Vacuum pump 구조를 제안하고 Pump control 회로 설계 및 실험을 통해 제품화하였다.

• Journal of Power Electronics
• /
• 제14권1호
• /
• pp.22-29
• /
• 2014

Current sharing between modules in a converter parallel operation is very important for the reliability of the system. This paper proposes an improved droop method that can effectively improve current sharing accuracy. The proposed method adaptively adjusts the output voltage set-point of each module according to the current set-points. Unlike conventional droop control, modules share a signal line to communicate with each other. Nevertheless, since signals are simple and in digital form, the complexity of the circuitry is much less and noise immunity is much better than those of conventional methods utilizing communication. The operation principle and design procedure of the proposed method are described in detail. Results of the experiment on two boost converters operating in parallel under the specification of a TFT LCD TV panel power supply verify the validity of the proposed scheme.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1362-1365
• /
• 2008

ED-2523 (Measuring methods for matr ix reflective LCD modules) was published by JEITA (Japan Electronics and Information Technology Industries Association) in 2001. Since then, round robin tests had been done and the accuracy of measurement values had been discussed. In this paper, considerations for error factors in four measurement systems are showed.