• Journal of Korea Society of Digital Industry and Information Management
• /
• v.6 no.3
• /
• pp.151-158
• /
• 2010

Media Skin is in form extended of TV or computer monitor that is digital media picture or digital output of graphic. Mean reflex or graphics applied in LCD Window of portable phone or LED display etc. of city environment mainly. Draft and study skill development trend and studied about role as graphic modeling to Media Skin. Media Skin that inflect LED over inside and outside of the country impulse to steal current is embodied. It is situating from modern society to one media trend. Progressed general investigation about Media Skin's connection skill in research. As culture contents progressed determinate research to graphic modeling element etc. As graphic modeling of new media special quality is construed by 4 as following. Contact, Real time, Nonlinear, Multi-Communication are it. Media Skin has function as symbol of city or media construction facade. Also, have enough value as function new media as information offer function, art.

• Journal of the Korean Society of Industry Convergence
• /
• v.9 no.4
• /
• pp.317-321
• /
• 2006

본 연구는 웰빙 환경 조성에 적합한 습도센서, 온도센서와 기류센서를 이용한 쾌적도 측정시스템에 관한 것이다. 이 측정시스템이 나타내는 쾌적도는 기류와 온도에 민감하게 나타났다. 시스템을 위한 온도와 습도 일체형 센서와 기류센서를 설계 및 제작하고, 마이크로 컨트롤러에서 센서 신호를 측정하여 ISO7730에서 나타내는 예상온열 감지수(PMV)와 쾌적감 지수(CSV)를 계산하고, 각각의 계산 값을 LCD에 표시하도록 하였다. 인위의 환경에서 실험한 결과, 본 시스템이 공기조화시스템, 자동차 기류조정시스템, 가정과 사무실 병원 등의 많은 분야에 적용이 될 수 있음을 알 수 있었다.

• Textile Coloration and Finishing
• /
• v.18 no.5 s.90
• /
• pp.72-79
• /
• 2006

There are many discrepancies between visually perceived color-difference and that which is quantified from an instrumental measurement when dark color samples are measured in the textile industry. The samples were prepared to represent these dark shades and the values of the instrumental results from conventional color-difference formulae(CIELAB, CMC, BFD II, CIE94, LCD99 and CIEDE2000). Those of visual assessment were compared. The experimental results show that the CIELAB formula gives the best performance over other formulae, and the CIEDE2000 formula for the color-difference according to chroma presents the worst performance. Therefore, we can say that the problems in color matching of dark shades are caused by imperfect formula, because the results obtained from a color-difference formulae are different and the CMC which is used as a standard color-difference formula in the textile industry is not correct. So, a revised color-difference formula is proposed in this study, to account for these problems.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.10
• /
• pp.23-27
• /
• 2011

In this paper, material handing cleanroom stocker system for thin film solar cell line of photovoltaic industry and liquid crystal display line of flat panel display industry was selected for the study. Optimum solution for stocker system's CPS(Contactless Power Supply) is approached by changing the motion pattern, optimizing design & production, and analyzing characteristics of the power system. As a result, acceleration time of X-Axis changed from 3 sec to 4 sec, changed the input characteristic of CPS within approximately 11[kW]. This result shows that extending acceleration time of the X-Axis in Stocker Crane's motion pattern can reduce the capacity of the CPS, thus saving the manufacturing cost.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.778-784
• /
• 2002

FFU are used increasingly by the microeleceronics industry to provide clean recirculating air for the fabrication of integrated circuits and laminar flow air. There may be several hundred ffu in a large cleanroom, covering 100% of the ceiling area. Hence, there is of often knowledge in the inside and outside of the country the flu give rise to noise & vibration trouble to microelectronics industry. Noise ＆ Vibration control for satisfication about noise ＆ vibration criteria in TFT-LCD factory cleanroom be in need of exact noise & vibration data of accurence from utility & equipment that can be exert a bad influence upon cleanroom. In this pater, hence we found out noise and vibration properities of ffu by using experimental method. And, we performed noise ＆ vibration analysis about noise it vibration level in cleanroom using semiempirical method for quantative approach about noise ＆ vibration level in cleanroom.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.1
• /
• pp.85-91
• /
• 2008

White light scanning interferometry has gotten a firm position in 3D surface profile measuring field. Recently, the LCD industry gave a chance for this technology to enter into real industry fields. It is known that white-light phase-shifting algorithm give a best resolution compare to other algorithms, but there are some problems to be resolved. One of them is 300nm jump in height profile, called bat-wing effect. The main reason of this problem is an ambiguity of phase-peak detection algorithm, and some solution has been proposed, but it didn't work perfectly. In this paper, I will show the cases when these effects are occurred, and these height discrepancies will be almost disappeared when broad-band illuminators are used.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.4
• /
• pp.650-656
• /
• 2018

The TFT-LCD industry is a kind of large-scale industrial Giant Microelectronics device industry and has a similar semiconductor process technology. Wet etching forms a relatively large proportion of the entire TFT process, but the number of published research papers on this topic is limited. The main reason for this is that the components of the etchant, in which the reaction takes place, are confidential and rarely publicized. Aluminum (Al) and copper (Cu), which have been used in recent years for the manufacture of large area LCDs, are very difficult materials to process using wet etching. Cu, a low-resistance material, can only be used in the wet etching process, and is used as a substitute for Al due to its high speed etching, low failure rate, and low power consumption. Further, the abnormal reaction of hydrogen peroxide ($H_2O_2$), which is used as an etching solution, requires additional piping and electrical safety devices. This paper proposes a method of minimizing the damage to the plant in the case of adverse reactions, though it cannot limit the adverse reaction of hydrogen peroxide. In recent years, there have been many cases in which aluminum etching equipment has been changed to copper. This paper presents a countermeasure against abnormal reactions by implementing safety PLC with a high safety grade.

• Journal of Technology Innovation
• /
• v.18 no.2
• /
• pp.175-219
• /
• 2010

Since diversification can be a necessary means for company's survival and the conservation of its success, hundreds of studies have been done by three schools of industrial economics, strategic management, and Neo-Schumpeterian economics for over 30 years. However, any school has not presented a model comprehensively explaining diversification' success or failure. The study tried to suggest a theoretical framework integrating findings came from three schools. The framework considers both firm's technological capabilities and sector-specific characteristics as well as reflects a Neo-Schumpeterian view emphasizing technological aspects. The goal of the study is finding major reasons of success and failure during company's diversification through studying three diversification cases of Samsung. Our findings show that the diversification toward TFT-LCD was easier and more successful than the diversification toward microprocessor because DRAM is more similar to TFT-LCD than microprocessor. Samsung also tended to build only the types of capabilities which were originated from capabilities accumulated in DRAM business. Our findings give firm's strategists a lesson that they can increase the probability of success in diversification, if only they should simultaneously consider a new sector's characteristics, a firm's technological capabilities accumulated in old sectors, and the availability of old capabilities for being applied to a new sector.

• Clean Technology
• /
• v.16 no.2
• /
• pp.103-116
• /
• 2010

It has been reported that the LCD panel market in the FPD industry is become growing and its panel size and production capacity are increasing, and its manufacturing technique is improved every year. FPD manufacturing process requires high cleanliness in its overall process. Especially, FPD cleaning process which accounts for 30~40% of total manufacturing process is very important in its technological and productivity aspects. It is difficult to remove residual liquid-crystal in the fine gap after liquid-crystal injection process in the cell. In this study, aqueous cleaning agents with excellent cleaning, rinsing, and penetrating abilities, but minimum ion content for LCD panel were formulated through mixing glycol ether-type and glycol dimethyl ether-type solvents and nonionic surfactants which are widely used as raw materials for alternative cleaning agents because of environmental regulation at home and abroad. And the formulated cleaning agents were applied to clean FPD liquid crystal after its injection in the cell. Physical properties, cleaning efficiencies, and rinsabilities of the formulated cleaning agents with different combination ratios of solvents, surfactants and additives were measured. As experimental results, the formulated cleaning agents showed higher wetting indices and cloud point than the traditional commercial cleaning agent. And it was found that cleaning efficiencies of the formulated cleaning agents were influenced by the structure of main solvents in them and the types of liquid crystal as soil for cleaning. The best cleaning agents among the formulated cleaning agents showed similar cleaning efficiencies and better rinsabilities compared to the conventional cleaning agent.

• Korean Management Science Review
• /
• v.32 no.4
• /
• pp.69-80
• /
• 2015

The semiconductor industry is one of those in which the most intricate processes are involved and there are many critical factors that are controlled with precision in those processes. Naturally production scheduling in the semiconductor industry is also very complex and studied by the industry and academia for many years; however, still there are many issues left unclear in the problem. This paper proposes an multi-objective optimization-based scheduling method for semiconductor fabrication(fab). Two main objectives are throughput maximization and meeting target production quantities. The first objective aims to reduce production cost, especially the fixed cost incurred by a large investment constructing a new fab facility. The other is meeting customer orders on time and also helps a fab maintain stable throughput through controlled WIP balancing in the long run. The paper shows a trade-off structure between the two objectives through experimental studies, which provides industrial practitioners with useful references.