• The Journal of the Korea Contents Association
• /
• v.10 no.5
• /
• pp.62-69
• /
• 2010

LCD panel need BLU(Back Light Unit) that is outside source of light because can not emit light voluntarily. BLU is used in LCD module and is used in tester that examine LCD panel's badness. Lately, BLU had changed from CCFL(Cold Cathode Fluorescent Lamp) to LED(Light-Emitting Diode) fast. CCFL need extra-high tension power and produce much heat and is difficult to keep fixed brightness. LED is few electric power wastage and keeps fixed brightness. But, BLU that is used to detector that examine the LCD module is using CCFL until recently. This paper develops LED BLU that can examine LCD panel's badness. Also, this manufactures LED BLU to 24 inch size to examine all LCD panels(12~24 inch), and develops so that LED BLU may operate according to LCD panel's size.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.4
• /
• pp.249-256
• /
• 2007

AIn this paper, a new desist of LDI controller IC for general purpose is proposed for driving the LDI(LCD Driver Interface) controller in $4{\sim}9$ inches sized portable small-medium TFT-LCD(Thin Film Transistor addressed -Liquid Crystal Display) panel module. The designed LDI controller was verified on the FPGA(Reld Programmable Gate Array) test board, and was made the interactive operation with the commercial TFT-LCD panel successfully. The purpose of design is that it is standardized the LDI controller's operation by one LDI controller for driving all TFT-LCD panel without classifying the panel vendor, and size. The main advantage for new general-purpose LDI controller is the usage for the desist of all panel's SoG(System on a Glass) module because of the design for the standard operation. And in the previous method, it used each LDI controller for every LCD vendor, and panel size, but because a new one can drive all portable small-medium sized panel, it results in reduction of LDI controller supply price, and manufacturing cost of AV(Audio Video) board and panel. In the near future, the development of SoG IC(Integrated Circuit) for manufacturing more excellent functional TFT-LCD panel module is necessary. As a result of this research, the TFT-LCD panel can make more small size, and light weight, and it results in an upturn of domestic company's share in the world market. With the suggested theory in this paper, it expects to be made use of a basic data for developing and manufacturing for the SoG chip of TFT-LCD panel module.

• Applied Chemistry for Engineering
• /
• v.28 no.5
• /
• pp.521-528
• /
• 2017

To find a recycling method for waste liquid crystal display (LCD) panel glasses, we investigated the synthesis process of zeolite with an ion exchange ability by hydrothermal reaction using waste LCD panel glass as a raw material. It was shown that the waste LCD panel glass can be used as a raw material for the production of zeolites having the ion exchange ability. Following conditions for the synthesis of the zeolite with an ion exchange ability were required : the molar ratio of Si to Al components of the waste LCD glass needs to be 2.0 to 2.8, and the temperature of $100^{\circ}C$ and reaction time of 12 hours are needed for the hydrothermal reaction. Based on the required conditions previously mentioned, the A type zeolite was synthesized when the molar ratio of the Si to Al component was 2.0, and the P type zeolite was produced when the molar ratio was 2.8. The type A zeolite synthesized by using the waste LCD panel glass showed a good ion exchange ability and heavy metal adsorption ability. Also, an excellent ion exchange capacity was observed as the crystal phase grows stably in a cubic phase.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.132-135
• /
• 2003

핸드폰에 장착된 반투과형 LCD (Liquid Crystal Display) 패널에서 반사판을 제거하면 투과형 LCD 마스크로 이용할 수 있다. LCD 패널의 광 흡수 실험에서 얻은 스펙트럼을 참고하여 다양한 파장대의 광원으로 리소그래피 하였다. 컴퓨터 이미지 프로그램으로 편집한 그림을 핸드폰 전용 통신 케이블을 통하여 LCD 패널로 전송하여, 다양한 모양의 패턴을 기판위에 전사하는데 성공하였다. 픽셀간의 경계가 현상되어 끊어지는 패턴이 형성되는 LCD 마스크의 단점을 극복하여 연속적인 패턴결과를 얻는데도 성공하였다. 이로부터 프로젝션 리소그래피의 응용에 쉽게 접근할 수 있는 발판이 마련된 것으로 생각된다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.12A
• /
• pp.1897-1903
• /
• 2000

산업용 칼라 액정 패널 비젼 시스템은 공장 자동화 시스템 및 고속도로 등의 모니터링을 위해 필요한 시스템이다. 본 논문에서는 산업용 액정 패널 비젼에서 입력신호인 NTSC, SECAM, PAL 및 컴퓨터의 RGB 신호를 받아 이를 그래픽 처리하여 LCD 패널에 디스플레이 하여 대형 스크린에 투사하기 위한 LCD 드라이버 인터페이스를 카드를 개발하였다. 개발된 인터페이스 카드는 XGA(1024X768)급의 성능을 가진다. 카드의 성능을 테스트하기 위해 적합성 시험을 하였으며, 테스트 결과 만족할 만한 결과를 얻을 수 있었다.

• Journal of Broadcast Engineering
• /
• v.18 no.4
• /
• pp.525-534
• /
• 2013

Recently, mura defect inspection techniques are receiving attention in LCD production procedure since demands of TFT-LCD are growing. In this paper, we propose an automatic mura defect inspection method using gabor wavelet transform and DCT. First, we generate a reference panel image using DCT based method. For original panel image and generated reference panel image, we apply a gabor wavelet transform to eliminate texture information in images. Then, we extract mura defect regions from the difference image between gabor wavelet transform image of original panel and generated reference panel image. Finally, all mura defect regions are quantified to detect accurate mura defects. Experimental results show that our method is more accurate and efficient than previous methods.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10a
• /
• pp.514-516
• /
• 2003

LCD(Liquid Crystal Display)는 자체 발광능력이 없으므로 그 후면에서 LCD 화면을 밝혀주는 BLU(Backlight Unit)를 필요로 한다. BLU의 핵심부품으로써 광원으로부터 나온 빛을 LCD의 패널 방향으로 이끌어내는 역할을 담당하고 있는 부분이 바로 도광판이고, 빛을 패널 방향으로 고르게 분포시키기 위해 도광판 하부에 점 모양의 확산물질을 인쇄한다. 이 인쇄패턴은 광원으로부터의 거리에 따라서 그 크기를 다르게 함으로써 패널 부분으로 균일한 평면광을 생성하도록 한다. 따라서 보다 균일한 평면광을 생성하는 BLU를 개발하기 위해서는 주어진 조건에서 패널 부분으로 균일한 평면광을 생성하도록 설계된 인쇄패턴을 찾는 것이 관건이다. 이러한 인쇄패턴을 Simplex Search 알고리즘을 사용하여 자동으로 찾게 함으로써 수작업으로 찾는 것보다 빠른 시간 내에 더욱 효율적인 인쇄패턴을 찾도록 한다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.04b
• /
• pp.697-699
• /
• 2004

LCD의 생산이 많아짐에 따라 LCD의 불량 검출이 중요해 지고 있다. 불랑 검사는 눈으로 확인할 수 있는 범위에서 검사가 이루어지고 있으며, 만약 눈으로 식별이 불가능한 경우 적외선 카메라나 초음파 센서를 사용하여 검사가 이루어진다. 본 논문에서는 카메라를 이용하여 LCD 패널의 표면에 있는 불량 검출을 위하여 각 Dot에 대한 R, G, B 값을 추출한 후, 추출된 픽셀을 제안된 알고리즘에 적용하여 불량을 검출하는 것을 목적으로 하고 있다.

• Resources Recycling
• /
• v.29 no.6
• /
• pp.57-64
• /
• 2020

In this study, removal of OCA and organic impurities for recycling LCD touch panel glass was conducted by mechanical and chemical dissolution methode. Cut mill and oscillation mill were used for mechanical crushing of touch panel, and water, ethanol, dichloromethane were used to remove OCA and organic impurities. As a result of TGA, when applied only dicloromethane in the process, the efficiency of organic removal was to be best. In addition, removal effect of organic impurities increased as the cleaning temperature increased. As a result of zeta potential analysis to confirm the dispersion degree of touch panel glass in the solvent, the absolute value of the zeta potenial of water with the lowest cleaning effect was lower than other solvents, and it was confirmed that efficiency of organic removal is affected not only by the chemical dissolution properties but also the physical dispersion properties in the solvent.

• Journal of KIISE:Software and Applications
• /
• v.34 no.11
• /
• pp.953-960
• /
• 2007

To correctly detect muras, visual defects in TFT-LCD panels, image distortion occurring on the profess of capturing panels should be corrected. In general vision systems, there are several known methods to restore the observed image. However, the vignetting effect particularly shown only in panel images cannot be easily restored through traditional methods because it is combined with background non-uniformity due to the unique characteristic of panel. To increase the reliability of image restoration, the vignetting effect should be properly corrected after being separated from image background. Therefore, in this paper we present a new method to analyze and correct the vignetting effect of panel images using principal component analysis. Experimental results for a total of 175 test images showed that the average contrast error of the muras in the distorted images was reduced from 37% to 11% and the mura misidentification rate was decreased from 14.8% to 2.2% by image restoration.