• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.4A
• /
• pp.579-585
• /
• 2000

This paper analyzes and compares the blocking performance of all-optical wavelength-routed networks providing circuit switching among users. A connection between two nodes along a particular path must use a single wavelength on all hops, or links, within the path. We then calculate the blocking probability along a lightpath with wavelength conversion in a network with an arbitrary topology and show the network performance improvement offered by node with limited translation technology. We also propose a new schematic method for the performance analysis of different types of network architecture which is composed of nodes with or without wavelength conversion(NC, FC or LC).

• Mass Spectrometry Letters
• /
• v.2 no.4
• /
• pp.88-91
• /
• 2011

The pharmacokinetic properties of S-amlodipine were studied using racemic amlodipine and single S-enantiomer (SK310) administration to rats. Plasma levels of the drug were determined using chiral liquid chromatography coupled with tandem mass spectrometry following solid phase extraction. The stereospecific analysis of amlodipine was performed on an ${\alpha}$-acid glycoprotein (AGP) column using a mobile phase comprising 10 mM ammonium acetate (pH 4.0) and propanol at a flow rate of 0.2 mL/min. This method was used to perform a comparative study of the pharmacokinetics of amlodipine and SK310. The results revealed that the pharmacokinetic profile of S-amlodipine after the administration of SK310 was comparable to that following the administration of the racemic mixture.

• Journal of the Korean Society of Industry Convergence
• /
• v.10 no.4
• /
• pp.227-233
• /
• 2007

In case of design of a rectifier to supply high current, To select switching frequency of semiconductor switches affect absolutely the design of the LC filter value in an power conversion circuit. The conventional rectifier by using MOSFET is no use in high current equipments because of small drain-source current. To solve this problem, this paper proposes to design of high capacity rectifier by parallel driving of MOSFET in the single half bridge DC-DC converter. This method can be able to develop high current rectifier by distributed drain-source current. The proposed scheme is able to expect a decrease in size, weight and cost of production by decreasing the LC filter value and increasing maximumly the switching frequency. The validity of the proposed parallel driving strategy is verified through computer-aided simulations and experimental results.

• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.101-104
• /
• 2004

대체에너지 시스템에서 필수적인 계통연계형 인버터는 LC필터를 거친 정현전압 출력에 계통과 연계용 인덕터를 연결하여 사용하여 왔으나, 최근 들어 인버터와 계통을 LC필터 없이 인덕터로만 계통과 연결하여 직접 전류를 제어하는 형태가 적용되고 있다. 또한 출력에 절연 변압기를 사용하던 기존방식과 달리 변압기가 없는 비절연형 인버터는 전류제어를 통해 계통과 직접연결하고, 부피감소와 원가절감을 이룰 수 있다. 본 논문에서는 저주파 절연변압기가 없는 3kW급의 태양광 발전시스템 시제품을 소개하고 단상계통과 연계한 전류제어 알고리즘의 실험결과를 통해 순시전류제어의 타당성을 확인한다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.426-429
• /
• 2005

The fringe-field switching (FFS) mode associated with a transition from a homogenously aligned to twist deformation require rubbing process. In this devices, $1^o$ of misalignment in an azimuthal direction could cause voltage-dependent transmittance (V-T) to be different from that in a normal area and consequently results in a rubbing mura. According to our studies, the single domain FFS cells are much more sensitive to the rubbing mura than the dual domain FFS cell. Moreover, the FFS cells with negative LC are much more sensitive to the rubbing mura than the FFS cells with positive LC.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.645-647
• /
• 2009

We investigated vertical liquid crystal (LC) alignment effects of a self-assembled-monolayer (SAM) prepared on an anisotropic $SiO_2$ surface where the field-induced LC reorientation produced a uniform single domain texture. We compared the results with the homeotropic-to-random planar reorientation results shown in LCs aligned on a SAM surface prepared on an isotropic $SiO_2$ surface.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.1235-1237
• /
• 2003

For small capacity rectifier circuits as these for consumer electronics and appli capacitor input type rectifier circuits are gen used. Consequently. various harmonics gen within the power system become a serious pro Various studies of this effect have been pres previously. However. most of these employ swit devices, such as FETs and the like. The absen switching devices makes systems more toleran over -load, and brings low radio noise benefits propose a power factor correction scheme using resonant in commercial frequency without swit devices. In this method. It makes a sinusoidal by widening conduction period using the cu resonance in commercial frequency. Hence, harmonic characteristics can be significantly imp where the lower order harmonics. such as the and seventh orders are much reduced. The resu confirmed by the theoretical and experm implementations.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.6
• /
• pp.155-166
• /
• 2016

It is important to configure capacitance(C) of the capacitor and the induction coefficient(L) of the work coil on the resonant circuit design stage in order to induce heating on the object by a precise and constant frequency components in the electromagnetic induction heating equipment. Work coil conducts a direct induction heating according to heating point and area of the object which has a fixed heat factor so that work coil is designed to has fixed value. On the other hands, Capacitor should be designed to be changed in order to be the higher the utilization of the entire equipment. It is extracted the samples by variation of single electrode capacity from the selection stage of raw materials for capacity to the stage of process design for output of the high frequency LC resonance of 700kHz on 1000 VAC maximum voltage and current to $200I_{MAX}$. It is suggested fundamental experiment results in order to prove relation for the optimal design of HF-LC resonance conduction-cooled capacitor based on the response of frequency characteristics and results of output parameters according to variation of the capacitance size.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.9
• /
• pp.825-830
• /
• 2009

Pharmaceutical compounds enter the water environment through the diverse pathways. Because their concentration in the water environment was frequently detected in the level of ppt to ppb, the monitoring system should be optimized as much as possible for finding appropriate management policies and technical solutions. One Factor At a Time (OFAT) approach approximating the response with a single variable has been preferred for the optimization of LC-MS/MS operational conditions. However, it is common that variables in analytical instruments are interdependent. Therefore, the best condition could be found by using the statistical optimization method changing multiple variables at a time. In this research, response surface analysis (RSA) was applied to the LC-MS/MS analysis of emerging antibiotic compound, sulfamethoxazole, for the best sensitivity. In the screening test, fragmentation energy and collision voltage were selected as independent variables. They were changed simultaneously for the statistical optimization and a polynomial equation was fit to the data set. The correlation coefficient, $R^2$ valuerepresented 0.9947 and the error between the predicted and observed value showed only 3.41% at the random condition, fragmentation energy of 60 and collision voltage of 17 eV. Therefore, it was concluded that the model derived by RSA successfully predict the response. The optimal conditions identified by the model were fragmentation energy of 116.6 and collision voltage of 10.9 eV. This RSA can be extensively utilized for optimizing conditions of solid-phase extraction and liquid chromatography.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.1
• /
• pp.79-84
• /
• 2007

In this paper, a fully-integrated low phase noise multi-band CMOS VCO using automatic level controller (ALC) and switched LC tank has been presented. The proposed VCO has been fabricated in a 0.13-um CMOS process. The switched LC tank has been designed with a pair of capacitors and two pairs of inductors switched using MOS switch. By using this structure, four band (2.986 ${\sim}$ 3.161, 3.488 ${\sim}$ 3.763, 4.736 ${\sim}$ 5.093, and 5.35 ${\sim}$ 5.887 GHz) operation is achieved in a single VCO. The VCO with 1.2 V power supply has phase noise of -118.105 dBc/Hz @ 1 MHz at 2.986 GHz and -113.777 dBc/Hz @ 1 MHz at 5.887 GHz, respectively. The reduced phase noise has been approximately -1 ${\sim}$ -3 dBc/Hz @ 1 MHz in the broadest tuning range, 2.986 ${\sim}$ 5.887 GHz. The VCO has consumed 4.2 ${\sim}$ 5.4 mW in the entire frequency band.