• Research in Plant Disease
• /
• v.28 no.4
• /
• pp.231-236
• /
• 2022

Oxypetalum coeruleum, commonly known as Tweedia, is a perennial herbaceous plant of the Apocynaceae family native to southern Brazil and Uruguay. Tweedia plants are grown as one of the most popular ornamental flowers for floral arrangement in Korea. In May 2021, several tweedia plants in a single greenhouse in Gimje, Jeollabuk-do were found to show virus-like symptoms including necrotic rings, vein-clearing, chlorotic mottle, and mosaic on the leaves, and necrosis on the stems. Here, we have identified tomato spotted wilt virus (TSWV) in symptomatic tweedia leaves by applying high-throughput RNA sequencing. In the result, a single infection by TSWV was verified without mixed infections of different virus species. To confirm the presence of TSWV, a reverse transcription polymerase chain reaction was performed with a specific primer set to the N gene of TSWV. The complete genomic sequence of L, M, and S segments of TSWV 'Oxy' isolate were determined and deposited in GenBank under accession numbers LC671525, LC671638, and LC671639, respectively. In the phylogenetic tree analysis by maximum likelihood method, 'Oxy' isolate showed a high relationship with TSWV 'Gumi' isolate from Gerbera jamesonii in Gyeongsangbuk-do, Korea; for all three RNA segments. To our knowledge, this is the first report of TSWV infection of O. coeruleum in Korea.

• Journal of Society of Preventive Korean Medicine
• /
• v.23 no.1
• /
• pp.83-94
• /
• 2019

Objective : This study investigated the effects of concentrated and lyophilized blue honeysuckle powders (BH) on the pharmacokinetics (PK) of sorafenib were observed. Method : The blood was collected at 0.5 hr before single oral treatment of sorafenib (40 mg/kg) or sorafenib with BH (400, 200 and 100 mg/kg) mixed formulas administration, and 0.5, 1, 2, 3, 4, 6, 8 and 24 hrs after the end of single or mixed formula administration. Plasma concentrations of sorafenib were analyzed using LC-MS/MS methods. Tmax, Cmax, AUC, $t_{1/2}$ and $MRT_{inf}$ of sorafenib were analysis as compared with sorafenib single treatment. Results : Single oral administration of mixed formulas induced significant increases of plasma sorafenib concentrations from 0.5 hr after end of administration throughout all blood collected time points, as compared with sorafenib single formula treated rats, and significant decreases of sorafenib Tmax with increases of Cmax, $AUC_{0-t}$ and $AUC_{0-inf}$ were detected in sorafenib and BH 400 mg/kg mixed formulation treated rats as compared with sorafenib single formula treated rats, respectively. Inaddition, sorafenib and BH 200 or 100 mg/kg mixed formula treated rats also showed significant increases of sorafenib Cmax, $AUC_{0-t}$ and $AUC_{0-inf}$, respectively. Conclusions : According to these results, mixed formulation of BH with sorafenib increased the bioavailability of sorafenib through the increment of the absorptions.

• Journal of Society of Preventive Korean Medicine
• /
• v.17 no.1
• /
• pp.77-88
• /
• 2013

Objectives : This study was aim to evaluate effects of pharmacodynamics and toxicity in combination therapy of donepezil with Gongjindan. Methods : After 10mg/kg of donepezil treatment, Gongjindan 100mg/kg was administered within 5 min. The plasma were collected at 30min before administration, 30min, 1, 2, 3, 4, 6, 8 and 24hrs after end of Gongjindan treatment, and plasma concentrations of donepezil were analyzed using LC-MS/MS methods. PK parameters of donepezil were analysis as compared with donepezil single administered rats. Results : Gongjindan markedly inhibited the absorption of donepezil regardless of sample time, from 30min to 8hrs after end of co-administration comparing with donepezil single treated rats. Especially the absorption of donepezil was significantly decreased at 2hrs after co-administration as compared with donepezil single treated rats, in the present study. Accordingly, the Cmax(-27.76%), $AUC_{0-t}$(-27.22%) and $AUC_{0-inf}$(-26.54%) of donepezil in co-administered rats were significantly decreased as compared with donepezil single treated rats, respectively. Conclusions : Based on the results of the present study, co-administration of Gongjindan decreases the oral bioavailability of donepezil by inhibiting the absorption. It is considered that the more detail pharmacokinetic studies should betested to conclude the effects of Gongjindan on the pharmacokinetics of donepezil, when they were co-administered, like the effects after co-administration with reasonable intervals considering the Tmax of donepezil and after repeated co-administrations.

• The Journal of Korean Medicine
• /
• v.37 no.2
• /
• pp.1-11
• /
• 2016

Objectives: The objective of this study was to elucidate the effect of Jaeumkanghwatang (JEKHT) on the plasma concentration and pharmacokinetics of tamoxifen in combination therapy as a process of the comprehensive and integrative medicine against breast cancer. Methods: After 50 mg/kg of tamoxifen treatment, JEKHT 100 mg/kg was orally administered within 5 min. The plasma were collected at 30 min before administration, 30min, 1, 2, 3, 4, 6, 8 and 24 hrs after end of JEKHT treatment, and plasma concentrations of tamoxifen were analyzed using LC-MS/MS methods. PK parameters of tamoxifen ($T_{max}$, $C_{max}$, AUC, $t_{1/2}$ and $MRT_{inf}$) were analysis as compared with tamoxifen single administered rats. Results: JEKHT did not influenced on the plasma concentrations and pharmacokinetics of tamoxifen after single oral co-administration, within 5min except for some negligible effects on plasma concentration. The $T_{max}$, $C_{max}$, AUC, $t_{1/2}$ and $MRT_{inf}$ of tamoxifen in co-administered rats were quite similar to those of tamoxifen single treated rats. Conclusions: Based on the results of the present study, JEKHT did not influenced on the oral bioavailability of tamoxifen, when they were single co-administered within 5min. However, more detail pharmacokinetic studies should be tested to conclude the possibilities that can be used as comprehensive and integrative therapy with JEKHT and tamoxifen for breast cancers, when they were co-administered, like the effects on the pretreatment of JEKHT and after repeat co-administrations.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.1
• /
• pp.168-180
• /
• 2018

In order to achieve the high quality output voltage of single-phase voltage source inverters, in this paper an Adaptive Complementary Sliding Mode Control (ACSMC) is proposed. Firstly, the dynamics model of the single-phase inverter with lumped uncertainty including parameter variations and external disturbances is derived. Then, the conventional Sliding Mode Control (SMC) and Complementary Sliding Mode Control (CSMC) are introduced separately. However, when system parameters vary or external disturbance occurs, the controlling performance such as tracking error, response speed et al. always could not satisfy the requirements based on the SMC and CSMC methods. Consequently, an ACSMC is developed. The ACSMC is composed of a CSMC term, a compensating control term and a filter parameters estimator. The compensating control term is applied to compensate for the system uncertainties, the filter parameters estimator is used for on-line LC parameter estimation by the proposed adaptive law. The adaptive law is derived using the Lyapunov theorem to guarantee the closed-loop stability. In order to decrease the control system cost, an inductor current estimator is developed. Finally, the effectiveness of the proposed controller is validated through Matlab/Simulink and experiments on a prototype single-phase inverter test bed with a TMS320LF28335 DSP. The simulation and experimental results show that compared to the conventional SMC and CSMC, the proposed ACSMC control strategy achieves more excellent performance such as fast transient response, small steady-state error, and low total harmonic distortion no matter under load step change, nonlinear load with inductor parameter variation or external disturbance.

• Journal of Pharmaceutical Investigation
• /
• v.39 no.1
• /
• pp.73-78
• /
• 2009

A simple LC-MS/MS method of rabeprazole in human plasma was developed and validated. Rabeprazole and Internal standard (I.S), omeprazole, were extracted from human plasma by liquid liquid extraction, chromatographic separation of rabaprazole in plasma was achieved at $45^{\circ}C$ with a Shiseido UG120 $C_{18}$ column and methanol-10 mM ammonium acetate buffer (pH 9.42 with ammonium water), as mobile phase. Rabeprazole produced a protonated precursor ion [$(M+H)^+$] at m/z 360.10 and corresponding product ion at m/z 242.21. Internal standard produced a protonated precursor ion [$(M+H)^+$] at 346.09 and corresponding product ion at m/z 198.09. This method showed linear response over the concentration range of $1{\sim}500\;ng/mL$ with correalation coefficient greater than 0.99. The lower limit of quantitation (LLOQ) using 0.2 mL plasma was 1 ng/mL, which was sensitive enough for pharmacokinetics studies. The method was specific and validated with a limit of quantitation of 1 ng/mL. The intra-day and inter-day precision and accuracy were acceptable for all samples including the LLOQ. The applicability of the method was demonstrated by analysis of plasma after administration of a single 10 mg dose to 36 healthy subject. From the plasma rabeprazole concentration versus time curves, the mean $AUC_t$ (The area under the plasma concentration-time curve from time 0 to 12 hr ) was $691.36{\pm}321.88\;ng{\cdot}hr/mL$, $C_{max}$ (maximum plasma drug concentration) of $353.21{\pm}131.52\;ng/mL$ reached $3.4{\pm}1.1\;hr$ after adiministration. The mean biological half-life of rabeprazole was $1.37{\pm}0.75\;hr$. Based on the results, this simple method could readily be used in pharmacokinetics studies.

• Restorative Dentistry and Endodontics
• /
• v.27 no.5
• /
• pp.502-514
• /
• 2002

The aim of this study was to evaluate the marginal adaptation of direct class II sandwich restoration with packable composites(P-60), resin modified glass ionomer cement(Fuji-II LC), flowable compomer(Dyract Flow), flowable composites(Filtek Flow) in comparison with total bond restorations. In addition, for sandwich restorations, influence of different sandwich techniques was also evaluated. Large butt-joint box typed class II cavites with cervical margins 1mm below the cemento-enamel junction were cut into 70 extracted human molars. The cavities(7 groups, n=10) were filled using a closed/open sandwich restoration or total bond restoration technique with materials according to the manufacturer's recommandation using the single-component bonding agent for each system. Teeth were thermocycled 500 times between 5$^{\circ}C$ and 55$^{\circ}C$ with 30-second dwell time. The teeth were then coated with nail polish 1mm short of the restoration, placed in a 2% methylene blue for 24 hours, and sectioned with diamond wheel. Sections were examined with a stereoscope to determine the extent of microleakage. Dentine /Cementum margins were analyzed for microleakage on scale of 0(no leakage) to 4(entire axial wall) and interface between materials, on scale of 0(no leakage) to 3(axial wall). Results were evaluated with Kruskal Wallis Test, corrected for ties, to determine whether there were statistically significant differences among the seven groups. Pairs of groups were analyzed using the Student-Newman-Keuls Method and Dunn s Method. The results were as follows : 1. All groups showed some micoleakage in cervical portion. But there were no microleakage in interface between materials. 2. Closed sandwich restorations with Fuji-II LC and Filtek Flow had significantly lower leakage rating than total restorations with only P-60. However, open sandwich restorations with Dyract Flow showed significantly higher (P<0.05) 3. Closed sandwich restorations had significantly lower leakage rating than total restorations. However open sandwich restoration s showed significantly higher (P<0.05). 4. Sandwich restorations with Fuji-II LC were iou$.$or leakage than only P-60. Filtek Flow, Dyract Flow. But there were no statistically differences among the materials. From the results above, it could be concluded, closed sandwich restorations was effective in reducing microleakage of class II restorations. The best results showing the least microleakage were for the closed sandwich technique with Fuji-II LC and Filtek Flow.

• Journal of Pharmaceutical Investigation
• /
• v.39 no.3
• /
• pp.207-216
• /
• 2009

Fluconazole is used as an orally administrated antifungal drug for the treatment of tinea corporis, candidiasis including skin mycotic pneumonia infections. The dosage of fluconazole varies with indication ranging from 50 mg/day to 400 mg/day. The fluconazole capsule 50 mg (3 capsules daily) is already available in Korean market. To improve the patient compliance, a fluconazole tablet 150 mg (once a day administration) was developed recently. The purpose of this study was to evaluate the bioequivalence of three doses of fluconazole capsule 50 mg (Diflucan 50 mg, Pfizer Korea Inc., as a reference drug) and a single dose of fluconazole tablet 150 mg (Plunazol 150 mg, Daewoong Pharm. Co., Korea) according to the guidelines of the Korea Food and Drug Administration (KFDA). The bioequivalence for three capsules of Diflucan 50 mg and a single tablet of Plunazol 150 mg was investigated in twenty-four healthy male volunteers under a randomized 2${\times}$2 crossover trial design. The average age of twenty-four volunteers was 24.78${\pm}$3.27 year-old, average height was 175.56${\pm}$5.45 cm and average weight was 67.24${\pm}$6.86 kg. After three capsules of Diflucan 50 mg or a single tablet of Plunazol 150 mg were orally administered, blood was taken at predetermined time intervals and the plasma concentrations of fluconazole in plasma were determined using LC-MS-MS. The 90% confidence intervals for the main parameters of statistical results after logarithmic transformation were AUCt 0.9272-1.0084 and Cmax 0.8423-0.9544 respectively, which are in the range of log 0.8 to log 1.25 and the statistical results of additional parameters (AUClast, t1/2 and MRT) were also in the 90% confidence interval that is in the range of log 0.8 to log 1.25. Therefore, the results of this study confirm the bioequivalence of three capsules of Diflucan 50 mg to one tablet of Plunazol 150 mg.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.11a
• /
• pp.337-340
• /
• 2007

In the dissertation, a power conversion system for fuel cell is composed of a PWM inverter with LC filter in order to convert fuel cell voltage to a single phase 220[V], In addition, new insulated DC-DC converters are proposed in order that fuel cell voltage is boosted to 380[V]. In this paper, it requires smaller components than existing converters, which makes easy control. The proposed DC-DC converter controls output power by the adjustment of phase-shift width using switch S5 and S6 in the secondary switch, which provides 93-97[%] efficiency in the wide range of output voltage. Fuel cell simulator is implemented to show similar output characteristics to actual fuel cell. Appropriate dead time td enables soft switching to the range where the peak value of excitation current in a high frequency transformer is in accordance with current in the primary circuit. Moreover, appropriate setting to serial inductance La reduces communication loss arisen at light-load generator and serge voltage arisen at a secondary switch and serial diode. Finally, TMS320C31 board and EPLD using PWM switching technique to act a single phase full-bridge inverter which is planed to make alternating current suitable for household.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.7
• /
• pp.1240-1246
• /
• 2000

The finite-difference time-domain (FDTD) method is applied to analyze a single step microstrip discontinuity in the substrate, and an equivalent circuit model comprised of two inductors and a capacitor has been developed using the numerical results. The microstrip discontinuity newly introduced in this paper has a thickness change of the substrate in the longitudinal direction with a uniform strip width. The discontinuity can be applied to the feeding circuit design for the patch antennas and interconnections between microwave circuit modules. The simulation results are compared with those computed by HFSS, and two results showed a good agreement. An equivalent circuit developed from the FDTD results, which is accurate within 2.4% in magnitudes of $S_{11}$ and $S_{21}$,can be applied for the computer-aided design of microwave circuits.