• 한국전기전자재료학회논문지
• /
• 제13권7호
• /
• pp.625-629
• /
• 2000

We synthesized a new copoly (PM4Ch-ChMA) copoly(poly(4-methacryloyloxy) chalcone-cholesteryl methacrylate) having chalconyl and cholesteryl moiety for homeotropic liquid crystal(LC) alignment. Pretilt angles of nematic(N) LC generated by linearly polarized UV exposure on the copolymer surfaces were investigated. Good thermal stabilities of the synthesized copolymer were obtained by TGA (Thermogravimetric Analysis) measurement. Pretilt angles of the NLC decreased with increasing UV exposure time on the copolymer surfaces. We consider that the pretilt angle of the NLC is attributed to increased chalcone by increased UV exposure time. High pretilt angle of the NLC is attributed to increased chalcone by increased UV exposure time. High pretilt angle of 81$^{\circ}$was observed after the UV exposure for 3 min.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계합동학술대회 논문집
• /
• pp.127-132
• /
• 2002

Electricity living body formation operation appliance is using most imports until present. And, because electricity living body formation operation appliance is too expensive, it becomes burden to buy in small scale hospital. Also, problem that economical damage by income is added follows. Therefore, this treatise developed electricity living body formation operation appliance by home production. Ultra high frequency eruption circuit used LC circuit. and output frequency is possible to 8 [MHz], and output voltage amplified maximum 800 [V]. This operation appliance could display size of fixed current. This developed product could microscopic operation fewer than 1 [mm]. This development technology is considered by do metallic surface heat treatment, melting, welding, induction heating device and that can apply to domestic animals surgical operation and so on.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.396-396
• /
• 2007

We investigated the liquid crystal (LC) aligning capabilities and electrooptical characteristics of semi-transparent silver paste electrodes substituting indium tin oxide (ITO) electrodes. Experimental results show that a uniform vertical LC alignment and a large pretilt angle were achieved using the semi-transparent silver paste. The vertical alignment mode based on the semi-transparent silver paste electrodes showed appropriate electro-optical characteristics and a high transparency in comparison with that based on the ITO electrodes. These results indicate that the semi-transparent silver paste electrodes of liquid crystal displays could substitute the ITO electrodes.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.80-83
• /
• 2003

We have investigated the generation of pretilt angle for a nematic liquid crystal (NLC) alignment with in-situ photoalignment method on polyimide (PI) surfaces using thin plastic substrates. The LC aligning capabilities and pretilt angle of the thin plastic substrates by in-situ photoalignment method were better than that of the glass substrate by general photoalignment. Also, the LC pretilt angle increased with increasing healing temperature and exposure time.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.453-454
• /
• 2006

We studied the nematic liquid crystal (NLC) alignment capability by the IB(Ion bean) alignment method on a NDLC(Nitrogen Diamond Like Carbon) as a-C:H thin film. and investigated electro-optical performances of the IBaligned IPS(In plane switching)cell with NDLC surface. A good LC alignment by IB exposure on a NDLC surface was achieved. Monodomain alignment of the IB aligned IPS cell can be observed. The goodelectro-optical (EO) characteristics of the IB aligned IPS cell was observed with oblique IBexposure on the NDLC as a-C:H thin film for 1 min.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.567-570
• /
• 2004

We have designed a single gap transflective liquid crystal display (LCD) driven by a fringe electric field, in which the LCs are homogeneously aligned in the initial state. In the reflective and transmissive areas, the degrees of the rotation of the LC director are $22.5^{\circ}$ and $45^{\circ}$, respectively. Utilizing this mechanism and an in-cell retarder with a quarter-wave plate that is used below the LC layer, the transflective LCD using fringe-field switching (FFS) mode is realized.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.583-585
• /
• 2004

In this paper, we synthesized a new photo-crosslinkable polyitaconimide containing cinnamoyl moiety by radical polymerization. Also, the NLC alignment capabilities on these photopolymer surfaces were studied. Good LC alignment with W exposure on the polyitaconimide surfaces can be obtained. A homogenous alignment using UV exposure on the polyitaconimide with 1-carbon chain cinnamoyl group and 4-carbon chain cinnamoly group can be obtained. However, the homeotripic alignment using UV exposure was observed on polyitaconimide with 6-carbon chain cinnamoyl. The LC aligning ability on the polyitaconimide depends on the side chain length of photopolymer.

• 한국수산과학회지
• /
• 제46권6호
• /
• pp.923-929
• /
• 2013

Black seabream juveniles Acanthopagrus schlegelii held at $20^{\circ}C$ were exposed to formalin at concentrations of 50 to 400 ppm, and tolerance values were determined by calculating median lethal concentration values (LC50) through probit analysis. The 12-, 24, 48, 72- and 96-h LC50 values for formalin were 297, 233, 171, 162 and 157 ppm, respectively. The histological effects of formalin on gill and liver tissues in this fish were determined. No histological effects were observed in the control group. The intensity of cell damage increased with the concentration of, and duration of exposure to, formalin. Hyperplasia, separation and epithelial necrosis, epithelial lifting, lamellar synechiae and collapsed lamellae were observed in gill tissues exposed to formalin. Hepatic lesions in liver tissues of fishes exposed to formalin were characterized by cloudy swelling of hepatocytes, necrosis, cytoplasmic vacuolization, deposition of pigments, spongiosis hepatis, nuclear hypertrophy, dilation of sinusoids and bile stagnation. The LC50 values and histological results obtained in this study will aid in designing treatment regimens to minimize toxic side effects and increase efficacy.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.329-329
• /
• 2008

To date, rubbing has been widely used to align LC molecules uniformly. Although rubbing can be simple, it has fundamental problems such as the generation of defects by dust and static electricity, and difficulty in achieving a uniform LC alignment on a large substrate. Therefore, noncontact alignment has been investigated. Ion beam induced alignment method, which provides controllability, nonstop process, and high resolution display. In this study, we investigated liquid crystal (LC) alignment with ion beam (IB) that non contact alignment technique on polyimide and electro-optical characteristics of twisted nematic (TN)-liquid crystal display (LCD) on the poly imide under various ion beam angles. In this experiment, Polyimide layer was coated on glass by spin-coating and Voltage-transmittance(VT) and response time characteristics of the TN cell were measured by a LCD evaluation system. The good characteristics of the nematic liquid crystal (NLC) alignment with the ion beam exposure poly imide surface was observed. The tilt angle of NLC on the PI surface with ion beam exposure can be measured under $1^{\circ}4 for all of irradiation angles. In addition, it can be achieved the good ED properties, and residual DC property of the ion beam aligned TN cell on polyimide surface.

• 대한금속재료학회지
• /
• 제46권9호
• /
• pp.577-584
• /
• 2008

The electrolytic reduction of spent oxide fuel involves the liberation of oxygen in a molten LiCl electrolyte, which results in a chemically aggressive environment that is too corrosive for typical structural materials. So, it is essential to choose the optimum material for the process equipment handling molten salt. In this study, corrosion behavior of Inconel 713LC, Inconel MA 754, Nimonic 80A and Nimonic 90 in the molten salt $LiCl-Li_2O$ under an oxidizing atmosphere was investigated at $650^{\circ}C$ for 72~216 hrs. Inconel 713LC alloy showed the highest corrosion resistance among the examined alloys. Corrosion products of Inconel 713LC were $Cr_2O_3$, $NiCr_2O_4$ and NiO, and those of Inconel MA 754 were $Cr_2O_3$ and $Li_2Ni_8O_{10}$ while $Cr_2O_3$, $LiFeO_2$, $(Cr,Ti)_2O_3$ and $Li_2Ni_8O_{10}$ were produced from Nimonic 80A. Also, corrosion products of Nimonic 90 were found to be $Cr_2O_3$, $(Cr,Ti)_2O_3$, $LiAlO_2$ and $CoCr_2O_4$. Inconel 713LC showed local corrosion behavior and Inconel MA 754, Nimonic 80A, Nimonic 90 showed uniform corrosion behavior.