• Restorative Dentistry and Endodontics
• /
• 제27권1호
• /
• pp.12-15
• /
• 2002

The first purpose of present study was to compare the anticariogenic effect of compomer, resin modified glass ionomer cement and composite (RMGIC). The second purpose was to evaluate the recently introduced methods, which use confocal scanning micro-scope, in detecting initial caries around restoration. 2$\times$4$\times$1.5mm cavities were prepared from the recently extracted 50 human teeth on the buccal or lingual surface. The prepared teeth were randomly devided into 5 groups and restored with each filling material. Group 1: Dyract AP, Group 2: compoglass F, Group 3: F2000, Group 4: Z100. Group 5:Fuji II LC. The teeth were stored for 30 days in the distilled water, then stored in the buffer solution for artificial caries development: pH 4.3, lactic acid 100 mM, calcium 16 mM, phosphate 8mM, sodium azide 3mM. Then, the samples were sectioned longitudinally and examined with confical scanning microscope. The results showed that the use of compomer and resin modified glass ionomer cement showed caries inhibition zone whereas the composite did not. There was no difference in the width of caries inhibition zone between compomers and RMGIC. The confocal scanning microscope was useful in detecting initial caries around restoration.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.468-470
• /
• 2005

We studied the nematic liquid crystal (NLC) aligning capabilities using the new alignment material of the SiC (Silicon Carbide) thin film. The SiC thin film exhibits good chemical and thermal stability. The good thermal and chemical stability makes SiC an attractive candidate for electronic applications. A vertical alignment of nematic liquid crystal by ion beam exposure on the SiC thin film surface was achieved. The about $87^{\circ}$ of stable pretilt angle was achieved at the range from $30^{\circ}$ to $45^{\circ}$ of incident angle. The good LC alignment is main-tained by the ion beam alignment method on the SiC thin film surface at high annealing temperatures up to 300.

• Transactions on Electrical and Electronic Materials
• /
• 제6권3호
• /
• pp.106-109
• /
• 2005

We have investigated the generation of pretilt angle for a nematic liquid crystal (NLC) alignment with in-situ photoalignment method on polyimide (PI) surfaces using polymer films. Especially, we studied in-situ photoalignment changing heating temperature from $50^{\circ}C\;to\;120^{\circ}C$ on the polymer film. The LC aligning capabilities and pretilt angle on the polymer substrates were better than those on the glass substrate using in-situ photoalignment method. It is considered that this increase in pretilt angle may be attributed to the roughness of the micro-groove substrate induced by the in-situ photoalignment. As temperature of heated subtrate and UV exposure time increase, pretilt angle of the cell used polymer film increased. It is considered that the heating temperature of substrate is attributed to generate pretilt angle. Also, electro-optical performances of the in-situ photoaligned TN cell using the polymer substrate are almost the same as that of the TN cell using the glass substrate.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.988-989
• /
• 2006

The ultrasonic welding is with features of high electric conductivity and hot conductivity when it is used in metallic bond, high electric conductivity and hot conductivity when it is used in various metallic bonds, excellent quality when it is used for advanced junction, easiness when it is used in various metallic bonds, being needless for the exhaustive material and being benefit for the environment. Currently the use of ultrasonic welding is increasing in the industrial fields such as the automobile battle, the refrigerator, the air conditioner, the battery and the solar cell junction. But the production ability is insufficient in our country and it is necessary to explore the core technology of the ultrasonic welding. In this paper, the output LC resonance filter and 35kHz squal wave onion occurrence Full Bridge plans was designed. The output examination of the ultrasonic oscillator and the ultrasonic welding examination were done. The method for getting more smooth result in the ultrasonic welding machine system was researched.

• Environmental Analysis Health and Toxicology
• /
• 제12권3_4호
• /
• pp.55-59
• /
• 1997

Furfural, an organic solvent, is widely used as synthetic component material in producing chemical products. However, furfural has been reported that it shows strong toxicities to human being showing intense stimulus to skin, eyes, mucous membrane and nerve system. It is also known to cause anemia, liver cirrhosis, kidney failure and genetic toxicity in the human being working in the exposed area. LD$_{50}$ of furfural for peritoneal injected mouse has been known around 20mg/kg, but the acute toxicity on aquatic organisms such as fish, daphnid or algae are not well known, compared to those on rodents. In this experiment, we studied on the fish toxicity of furfural using Japanese Medaka (Orvzias latipes) and Common Carp (Cvprinus carpio). We also observed histological changes in the fish organs. The LC$_{50}$ were 12. Smg/L in Japanese Medaka and 21.8 mg/L in Common Carp, respectively. When Common Carps were exposed to 120mg/L of furfural concentration for 30 minutes, blood congestion in gills and lysis of secondary lamella were shown. Though the muscle of caudal fin was not completely eroded, its epidermic cells were shown to be necrotic in various parts. Tissue atrophy and cell necrosis were also shown in the liver of Common Carps exposed to furfural. From these results, furfural seems to cause histological damages on liver, an internal organ as well as on external organs such as gills and fins eventhough the fish were exposed for a short-term.

• Transactions on Electrical and Electronic Materials
• /
• 제18권4호
• /
• pp.190-194
• /
• 2017

Present-day solar panels incorporate inverters as their core components. Switching devices driven by specialized power controllers are operated in a transformerless inverter topology. However, some challenges associated with this configuration include the absence of isolation, causing leakage currents to flow through various components toward ground. This inevitably causes power losses, often being also the primary reason for the power inverters' analog equipment failure. In this paper, various aspects of the leakage currents are studied using different circuit analysis methods. The primary objective is to convert the leakage current energy into a usable DC voltage source. The research is focused on harvesting the leakage currents for producing circa 1.1 V, derived from recently developed rectifier circuits, and driving a $200{\Omega}$ load with a power in the milliwatt range. Even though the output voltage level is low, the harvested power could be used for charging small batteries or capacitors, even driving light loads.

• Transactions on Electrical and Electronic Materials
• /
• 제11권1호
• /
• pp.24-28
• /
• 2010

A simulation study of a current-mode direct current (DC)-DC buck converter is presented in this paper. The converter, with a fully integrated power module, is implemented by using sense method metal-oxide-semiconductor field-effect transistor (MOSFET) and bipolar complementary metal-oxide-semiconductor (BiCMOS) technology. When the MOSFET is used in a current sensor, the sensed inductor current with an internal ramp signal can be used for feedback control. In addition, the BiCMOS technology is applied in the converter for an accurate current sensing and a low power consumption. The DC-DC converter is designed using the standard $0.35\;{\mu}m$ CMOS process. An off-chip LC filter is designed with an inductance of 1 mH and a capacitance of 12.5 nF. The simulation results show that the error between the sensing signal and the inductor current can be controlled to be within 3%. The characteristics of the error amplification and output ripple are much improved, as compared to converters using conventional CMOS circuits.

• Transactions on Electrical and Electronic Materials
• /
• 제9권5호
• /
• pp.198-201
• /
• 2008

The electro-optical (EO) characteristics of the one-side rubbing twisted nematic (TN) - liquid crystal display (LCD) on the polyimide (PI) surface with one-side ion beam (IB) irradiation were successfully studied. The good LC alignment for the one-side rubbing TN-LCD on the PI surface with one-side IB irradiation was observed. The suitable transmittance-voltage curves for the one-side rubbing TN-LCD on the PI surface with one-side IB irradiation were measured. Also, the good response time characteristics of the one-side rubbing TN-LCD on the PI surface with one-side IB irradiation were measured. The fast response time can be achieved for the one-side rubbing TN-LCD on the PI surface with one-side IB irradiation.

• Restorative Dentistry and Endodontics
• /
• 제21권2호
• /
• pp.635-641
• /
• 1996

This study was designed to evaluate the anti cariogenic effect of F in primers, bonding agents, composite resins or glass ionomer cements in enamel. Twenty-five extracted teeth were selected and a cavity was prepared on either the buccal or the lingual surface of each tooth. After pumicing and etching, the samples were divided into 5 groups. In group A, the samples were primed, bonded and filled with ART bond and Brilliant Enamel (Coltene, Switzerland). Group B composed of Optibond and Herculited XRV (Kerr, USA), group C composed of Syntac and Tetric(Vivadent, Lichtenstein), and group D composed of Scotch-bond Multipurpose and Z 100 (3M, YSA). In group E, the samples were filled with glass ionomer cement (Fuji II LC, Japan), All surfaces except the 2mm beyond the cavosurface margin of the sample were protected, and samples were then put into an acid buffer for 3 days to develop the initial caries. The samples were then sectioned through the filling body into thin wafers and then examined with a polarizing microscope under water imbibition. The fluoride in primer, bonding agent, or composite filling material did not prevent the initial caries in the enamel area adjacent to the filling body whereas the fluoride in the glass ionomer did prevent the initial stage caries.

• Journal of Microbiology and Biotechnology
• /
• 제32권5호
• /
• pp.594-601
• /
• 2022

This study evaluated the biological properties of lemongrass (Cymbopogon citratus) extracts. The EtOAc extract of lemongrass had DPPH, TEAC, and nitric oxide-scavenging activity assay results of 58.06, 44.14, and 41.08% at the concentration of 50, 10, and 50 ㎍/ml, respectively. The EtOAc extract had higher elastase and collagenase inhibitory activities than the 80% MeOH, n-hexane, BuOH, and water extracts and comparable whitening activity toward monophenolase or diphenolase. Also, the EtOAc fraction had higher lipase inhibitory and antimicrobial activities against Cutibacterium acnes among extracts which is known to an important contributor to the progression of inflammatory acne vulgaris, and an opportunistic pathogen present in human skin. Total phenolic and flavonoid concentrations in the EtOAc extract were 132.31 mg CAE/g extract and 104.50 mg NE/g extract, respectively. Biologically active compounds in lemongrass extracts were analyzed by LC-MS. This study confirms that lemongrass extracts have potential use as cosmetic skincare ingredients. Thus, lemongrass can be considered a promising natural source of readily available, low-cost extracts rich in antioxidant, skincare, and antimicrobial compounds that might be suitable for replacing synthetic compounds in the cosmeceutical industry.