• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.118-119
• /
• 2000

최근에 많이 사용되는 휴대용기기의 표시장치인 액정표시장치를 보면 반사형 액정표시장치가 많이 사용되고 있다. 반사형 액정표시장치는 표시장치의 전력소모의 많은 부분을 차지하는 backlight 를 주변 광원으로 대체하여 전력소모를 줄일 수 있는 표시장치로서 많이 연구되고있다. 최근에 연구되고있는 반사형 표시장치를 살펴보면 반사형 TN (Twisted Nematic) LC 모드가 주류를 이루고 있으나 콘트라스트비가 낮은 단점이 있다$^{[1]}$ . 이를 극복하기 위하여 반사형 VA (Vertical Aligned) LC 모드가 제시되어진다. VA LC 모드는 TN LC 모드와 반대로 음의 유전율 이방성을 가지는 액정물질을 이용하여 유리기판에 수직으로 배향시킨 모드로서, 전압이 인가되지 않은 초기상태에는 액정 cell 이 복굴절을 전혀 나타내지 않는다. TN LC 모드와 정확히 역의 구조를 가진다. 그리하여 초기상태에서 편광판 한 장과 광대역 λ/4 위상지연판을 사용하여 뛰어난 어두운 상태를 구현할 수가 있다. (중략)

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.6 no.4
• /
• pp.281-285
• /
• 2006

In order to widen the tuning range, capacitive degeneration is applied to fully CMOS LC VCOs. Small signal analysis shows that the fixed MOSFET capacitance seen by the LC tank is smaller than that of the traditional LC VCO, resulting in significant extension in the tuning range. This improvement in the tuning range has been verified through measurement of a 10-GHz LC VCO fabricated by $0.18{\mu}m$ CMOS process. The measured tuning range is from 9.8-GHz to 12-GHz, which is better than those of the reported CMOS LC VCOs in 10-GHz band. The measured phase noise is - 103dBc/Hz at 1MHz offset.

• Journal of Advanced Marine Engineering and Technology
• /
• v.19 no.4
• /
• pp.79-91
• /
• 1995

Recently, the AC motor which has a simple structure and needs less maintenance has become to be used frequently as a servomotor for position control in the automatic control field. This paper concerns with a method to improve the current and power waveforms of an AC motor, and the current waveforms and 3$\phi$ power waveforms are analyzed by FFT under verious running conditions. The system is composed of a digital bridge inverter, low pass LC filter, and 3$\phi$ AC motor. Through the computer simulations and experiments, it is confirmed that current waveforms and $\phi$ power waveforms con by improved by utilizing the high order low pass LC filter than that of lower order.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.437-438
• /
• 2005

A polymer stabilization method is employed to reduce the transition time from field-induced homeotropic(H) state to reflecting planar(P) state in the cholesteric liquid crystal(ChLC) display. To stabilize ChLC by polymer, we mixed ChLC with diacrylate of 2 $wt%{\sim}6$ wt%. Two samples were made with different method of stabilization. For one sample the diacrylate of 2 wt% was polymerized with the ChLC in P state, while for the other sample diacrylate of 16 wt% was polymerized with ChLC in H state. In the former case, the transition time was 1000 times faster then those in the pure sample. In the latter sample, the transition time was 1700 times faster than those in pure ChLC sample.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.330-333
• /
• 2005

We investigated the liquid crystal (LC) alignment phenomena using a-C:H and a-C:F:H thin films. Homogeneous alignment is obtained using ion beam treated hydrogenated amorphous carbon (a-C:H) thin films. Homeotropic alignment is obtained using F treated a-C:H thin films, namely, fluorinated amorphous carbon (a-C:F:H) thin films. We investigated the relationship between the surface properties of amorphous carbon based alignment layer and LC alignment phenomena.

• Macromolecular Research
• /
• v.17 no.7
• /
• pp.506-515
• /
• 2009

We synthesized a series of polystyrene derivatives containing various side chain terminal moieties, such as phenoxymethyl, 4-methoxyphenoxymethyl, 4-fluorophenoxymethyl, 4-methylphenoxymethyl, and 4-trifluoromethoxyphenoxymethyl groups, using polymer analogous reactions, in order to investigate the effect of the side group on their liquid crystal (LC) alignment behaviors. The polymers containing 4-fluorophenoxymethyl, 4-methylphenoxymethyl, or 4-trifluoromethoxyphenoxymethyl side groups had lower surface energy values and the LC cells fabricated using the unrubbed films of these polymers showed homeotropic LC alignment behavior. The LC cells fabricated using the rubbed films of the polymers containing phenoxymethyl or 4-fluorophenoxymethyl groups showed homogeneous planar LC alignment behavior in which the LCs were aligned perpendicular to the rubbing direction. This homogeneous planar and perpendicular alignment behavior was ascribed to the favorable anisotropic interactions between the LC molecules and the side groups preferentially oriented perpendicular to the rubbing direction.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.299-302
• /
• 2007

We propose a soft-lithographic patterning method for producing a multi-domain liquid crystal (LC) alignment. The LC alignment polyimide layers are periodically patterned in the pixel boundaries by a micromolding-in-capillaries method. In our structure, the initially homeotropic LC orientations in the pixel areas are changed to axially symmetric LC domains due to the symmetric pretilt of LC molecules on the pixel boundaries.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.531-533
• /
• 2007

A new method is developed for the measurement of twist angles of LC molecules in an LC panel with angular resolution of 0.01degree, which allows measurement of LC panels with small twist angles. The method is based on the analysis of the change in polarization state of a light beam as it passes through the LC panel in test is rotated in-plane. Compared to other traditional method, including the analysis of transmittance change, our method is more sensitive and more precise. This method allows accurate determination of anchoring energy and close analysis of the rubbing process in the fabrication of IPS mode LC panels.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.3
• /
• pp.224-230
• /
• 2003

The voltage-dependent transmittance curve of a homogeneously aligned liquid crystal (LC) cell driven by fringe-electric field(named FFS mode) was studied, while changing dielectric anisotropy of a LC. The results show that for a LC with positive dielectric anisotropy while positioning at initial position. Therefore, we conclude that the dynamic stability is strongly dependent on the types of the LCs and voltage-dependent dynamics of the LC with negative dielectric anisotropy is staler than that of the LC with positive dielectric anisotropy in the FFS mode.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2579-2581
• /
• 2001

넓은 가변 범위를 가지는 LC 탱크 전압 제어 발진기에 관해 본 논문에서 소개하고자 한다. LC 탱크 전압 제어 발진기의 발진을 소멸시키는 밀러 증폭기의 ESR을 제거함으로써 넓은 가변 범위를 얻을 수 있다. LC 탱크 전압 제어 발진기는 발진기 코어와 버퍼, 밴드갭(bandgap) 기준 전압 발생기 그리고 드라이브 증폭기로 구성되어 있다. 발진기 코어는 1.3mA의 전류를 소모하고 약 1GHz의 가변 범위를 가진다. 출력주파수의 가변 범위내에 발진기의 출력 전력은 3dBm 이내로 변한다. 이러한 LC 탱크 전압 제어 발진기는 BiCMOS 공정을 이용하여 제작되었고 2.7V 단일 전원에서 31.5mW의 전력을 소모한다.