• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.49 no.2
• /
• pp.87-91
• /
• 2000

Metal ion complex of poly(N-(2,4-imidazoly)ethyl)maleimide-alt-l-octadecene (IMO-O) polymer used to confirm the possibility of molecular device made by Langmuir-Blodgett(LB) method. Electrical properties of the metal ion complex LB film were investigated using Metal/Insulator/Metal(MIM) structure. In the surface pressure-area($\pi$-A) isotherm of IMI-O polymer, the surface pressure at collapse point has a difference due to the interaction between polymer and metal ions. And the complex between polymer and metal ions could be verified through the investigation by Raman spectroscopy. In the current-voltage(I-V) property, the conductivity change of IMO-O polymer complexes due to the kinds of metal of metal ions couldn't be observed. However, the limiting area of molecules was changed by the concentration of the metal ions and the conductivity was increased with the occupied molecular area.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.1203-1205
• /
• 1993

The use of preformed polymers and their cross-linking have been attempted in order to improve the intrinsic fragility of monolayers and Langmuir-Blodgett(LB) films. The evaluation of the characteristics of LB multi-layer by using AT-cut quartz crystal have been also attempted. From this study, it reveals that the polyether pendants of 2C18VE3 lie at the air-water interface at low surface pressures and are forced down into the subphase when the monolayers are compressed. This caracteristic behavoir of the pendant polyethers is much clear on aqueous PAA and also observed on saturated aqueous NaCl. And the characteristics of LB multi-layers could be evaluated by using AT-cut quartz crystal in situ.

• Journal of the Korean Applied Science and Technology
• /
• v.26 no.2
• /
• pp.224-231
• /
• 2009

Techniques measuring Maxwell displacement current (MDC) and LB films surface measuring technique have been applied to the study of monolayers of polyamic acid containing azobenzene. MDCs was generated from monolayers on the water surface by monolayer compression and expansion. It was generated when the area per molecule was about $103{\AA}^2\;and\;78{\AA}^2$ just before the initial rise of the surface pressure during the 1st and 2nd mixed monolayer compressions cycle, respectively. It was the maximum of MDCs appeared at the molecular area just before the initial rise of surface pressure in compression cycles, and we have found that the increase of aggregations causes the noticeable increase of the surface roughness.

• Journal of the Korean Applied Science and Technology
• /
• v.11 no.1
• /
• pp.39-44
• /
• 1994

A Stability to the Spreading solvents, Which is acetonitrile, dichloromethane, benzene, chloroform and acetonitrile-benzene(1:1, v/v) of (3-Alkyl benzimidazolium)-TCNQ(1:1) Complex was investigated by UV-visible Spectrometer and was confirmed stabilized on acetonitrile, acetonitrilbenzene(1:1, v/v) for five hours. Using Ultra pure water as subphase for Langmuir-Blodgett (LB) Films, it was achived successively to fabricate the Y-type LB films of (3-Alkyl benzimidazolium)-TCNQ(1:1) Complex. For the identification of deposition of (3-Alkyl benzimidazolium)-TCNQ(1:1) Complex, UV-visible spectra was recorded on HP 8452A spectrometer.

• Journal of the Korean Applied Science and Technology
• /
• v.11 no.2
• /
• pp.99-103
• /
• 1994

A stability to the spreading solvent, which is acetonitrile, benzene, chloroform and acetonitrile-benzene(1:1, v/v) of (3-Alkyl benzimidazdium)-TCNQ(1:2) complex was investigated by UV-visible spectrometer and was confirmed stabilized on acetonitrile, acetonitrile-benzene (1:1, v/v) for five hours. Using Ultra pure water as subphase for Langmuir-Blodgett(LB) films, it was achived successively to fabricate the Y-type LB films of (3-Alkyl benzimidazolium)-TCNQ(1:2) complex. For the identification of (3-Alkyl benzimidazolium)-TCNQ(1:2) complex, UV-visible spectra was recorded on HP 8452A spectrometer.

• Journal of the Korean Applied Science and Technology
• /
• v.11 no.2
• /
• pp.89-92
• /
• 1994

Ultra thin organic films, (3-docosyl benzimidazolium)-TCNQ(1:1)complex, were deposited onto ordinary microscope slide glass substrates with a Langmuir-Blodgett technique. II-A isotherms were studied to find optimum conditions of deposition by varying temperature. Anisotropic de electrical conductivities were measured at room temperature. They are about $5.21{\times}10^{-12}S/cm$ along the direction of film surface, and $(2.73{\sim}4.40){\times}10^{-16}S/cm$ in the vertical direction.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1539-1541
• /
• 2002

When did Metal (Au, Al) electrode differently, it is spread already that it is by energy level of electrode difference of electrical conductivity. This paper, experiment manufactures device of Metal/Organic Films/Metal structure using PBDG and I-V properties by electrode analyzed comparison. Also, measure energy level by electrode by propertiesy electrochemistry and studied about electron transfer of organic thin film in LUMO level relation with HOMO level.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.143-146
• /
• 1999

In this study, Ultra-thin films of (N-ducosyl quinolinium)-TCNQ(1:2) complex were prepared on the hydrophilic substrate by Langmuir-Blodgett(LB) technique. By measure of UV-vis spectra and capacitance, deposition status was confirmed together with the thickness of natural oxidized aluminum film inside a device and dielectric constant of (N-docosyl quinolinium)-TCNQ(1:2) complex. The electrical properties of (N-docosyl 7uin7linium)-TCNQ(1:2) complex were investigated at room temperature. The conductivity of this film measured by the direction uf either vertical or horizontal axis is results in a quite different value.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.480-483
• /
• 2000

Polyimide is a well-known organic dielectric material, which has not only high chemical and thermal stability but also good electrical insulating and mechanical properties. In this research, the electrical properties of PI LB films were investigated at room temperature. At low electric field, ohmic conduction(I∝V) was observed and the calculated electrical conductivity was about 9.7$\times$10$^{-15}$ S/cm. At high electric field, conduction(I∝V$^2$) was observed and the conduction mechanism was explained by space charge limited region effect. The dielectric constant of LB film was about 7.5.

• Proceedings of the KOSOMBE Conference
• /
• v.1996 no.05
• /
• pp.123-125
• /
• 1996

The orientation effect of galactose ligand on hepatocyte attachment was investigated. Poly(N-p-vinyl benzyl-o-${\beta}$-D-galactopyranosyl-D-gluconamide) (PVLA), a ${\beta}$-galactose-carrying styrene homo-polymer, was used as a model ligand for the asialoglycoprotein receptors on hepatocytes. PYVA was transferred onto the poly(${\gamma}$-benzyl L-glutamate)(PBLG) or PBLG/ poly(ethylene glycol)(PEG)/PBLG Langmuir-Blodgett (LB) films as the monolayer level. The dichroic fluorescence values of confocal microscope indicated that the PVLA transferred onto the LB films was located with a preferential orientation of its molecular axes with regard to the direction of the a-helix of polypeptide. Hepatocyte recognized well-oriented galactose moieties of the surface of PVLA through asialoglycoprotein receptors.