• Journal of Sensor Science and Technology
• /
• v.31 no.4
• /
• pp.249-254
• /
• 2022

To achieve high-performance colloidal quantum dot light-emitting diodes (QD-LEDs), the use of a densely packed QD film is crucial to prevent the formation of leakage current pathways and increase in interface resistance. Spin coating is the most common method to deposit QDs; however, this method often produces pinholes that can act as short-circuit paths within devices. Since state-of-the-art QD-LEDs typically employ mono- or bi-layer QDs as an emissive layer because of their low conductivities, the use of a densely packed and pinhole-free QD film is essential. Herein, we introduce the Langmuir-Blodgett (LB) technique as a deposition method for the fabricate densely packed QD films in QD-LEDs. The LB technique successfully transfers a highly dense monolayer of QDs onto the substrate, and multilayer deposition is performed by repeating the transfer process. To validate the comparability of the LB technique with the standard QD-LED fabrication process, we fabricate and compare the performance of LB-based QD-LEDs to that of the spin-coating-based device. Owing to the non-destructiveness of the LB technique, the electroluminescence efficiency of the LB-based QD-LEDs is similar to that of the standard spin coating-based device. Thus, the LB technique is promising for use in optoelectronic applications.

• Proceedings of the KIEE Conference
• /
• 1989.11a
• /
• pp.98-100
• /
• 1989

Langmuir-Blodgett(LB) technique will be used to produce ultra thin film, and then characterization of the physical and electrical properties of LB ultra thin films, this study will be an investigation for the possibilities of the ultra thin films as an Molecular Electronic Device.

• Journal of Sensor Science and Technology
• /
• v.7 no.4
• /
• pp.254-262
• /
• 1998

Multilayer Langmuir-Blodgett (LB) films coated on quartz crystal microbalance (QCM) of octa-substituted metallophhtalocyanines ($MPc(OEH)_8$, M = Cu, Co, and Sn) and dihydrogen phthalocyanines ($H_2Pc(OEH)_8$) were used to quantify $NO_2$ concentrations. They were exposed to various concentrations of $NO_2$ in dry $N_2$. Among the four phthalocyanines we tested, the metal-free $H_2Pc(OEH)_8$ was observed to be most sensitive to $NO_2$. However, its LB film showed a partially irreversible behavior, that is part of the frequency change due to $NO_2$ adsorption could not be recovered even after purging with pure $N_2$ gas for an extended period. Examining the spectra of NMR and FTIR revealed fact that the irreversible portion of frequency change was due to ether groups in the linkage between side chains and the Pc unit. In order to remove the effect of such initial deactivation, on $NO_2$ quantification experiment, a freshly fabricated LB film was treated at a high concentration of $NO_2$ so that the ether sites were saturated. A pretreated LB film showed a reproducible performance for repeated uses. The $CuPc(OEH)_8$ LB film showed a satisfactory sensing performance down to as low as 4 ppm. For the $H_2Pc(OEH)_8$ LB film, the lower detection limit was found to be 35ppb of $NO_2$. In order to make the experimental condition more realistic, the carrier gas, dry nitrogen, was replaced by air. It was observed that the presence of oxygen, a weak electron acceptor, reduced the sensitivity and thus increased the sensing limit to hundreds of ppb. Results of experiments with moisture added showed that the interference of moisture was quite severe.

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.2
• /
• pp.311-316
• /
• 2012

We are investigated to an electrochemical characteristic for Langmuir-Blodgett (LB) films by cyclic voltammetry method. The phospholipid compound was deposited by using the LB method on the Indium tin oxide(ITO) glass. We tried to measure the electrochemical by using cyclic voltammetry with three-electrode system(an Ag/AgCl reference electrode, a platinum wire counter electrode and LB film-coated ITO working electrode) in 0.5, 1.0, 1.5 and 2.0 N $NaClO_4$ solution. A measuring range was reduced from initial potential -1350 mV, continuously oxidized to 1650 mV. As a result, LB films of the phospholipid compounds are appeared irreversible process caused by only the oxidation current from the cyclic voltammogram. The diffusivity(D) effect of LB films decreased with increasing of phospholipid compound amount.

• Journal of the Korean Applied Science and Technology
• /
• v.19 no.1
• /
• pp.49-55
• /
• 2002

We carried out this experiment to observe electrochemical properties for LB films of phospholipid(Dilauroyl-L-${\alpha}$-Phosphayidylcholine) and 4-octyl-4'-(5-carboxypentamethylene-oxy)azobenzene mixture by the cyclic voltammetry. LB films of 8A5H and 8A5H-DLPC(1:1, 2:1) were deposited by using the Langmuir-Blodgett method on the ITO glass. We determined electrochemical measurement by using cyclic voltammetry with a three-electrode system, An Ag/AgCl reference elect rode, a platinum wire counter electrode and LB film-coated ITO working electrode measured in 0.1, 0.5, and 1.0 mol/L $NaClO_{4}$ solution. A measuring range was reduced from initial potential to -1350 mV, continuously oxidized to 1650 mV and measured to the initial point. The scan rate were 50, 100, 150 and 200 mV/s. As a result, LB films of 8A5H 8A5H-DLPC appeared irreversible process caused by only the oxidation current from the cyclic voltammogram.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.601-604
• /
• 1999

Electroluminescence(EL) devices based on organic thin films have attracted lots of interests in large-area light-emitting display. Recently, many EL researcher have interested a new emissive organic material. In this study, light-emitting organic electroluminescent devices were fabricated using Langmuir-Blodgett(LB) technique with new emissive organic material. This new emissive organic material were synthesis by our teams and we called PECCP [poly(3,6-N-2ethylhexyl carbazoly cyanoterephthalidene)] which has strong electron donor group and electron acceptor group in main chain repeat unit. This material has good solubility in common organic solvent such as chloroform. THF, etc. and has a good stability in air. In here, the new emissive material is applied to Langmuir-Blodgett(LB) method because our new material has a good stability in air. Optimum conditions of film deposition were examined by a surface pressure-area( $\pi$ -A) isotherms with various factors. The LB film were deposited on a indium Tin Oxide(ITO) glass. We were investigated by measuring current-voltage(I-V) characteristics. Also we were measured the UV/visible absorption at about 410nm and PL spectrum at about 530nm. We are attempt to the electroluminescence device properties of the new emissive material by Langmuir-Blodgett(LB) technique.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1371-1372
• /
• 2007

In this study, in order to confirm the application possibility to the molecular electronic device, morphlogical property of the Arachidic acid was investigated. We have investigated morphology by BAM image and AFM. ${\pi}$-A curves investigated surface pressure of this LB film from liquid to solid state ranged between 40 to 45 mN/m. BAM images investigated the different states of Arachidic Acid LB film. When the surface pressure reaches at 40 mN/m, the monolayer was deposited onto the hydrophilic glass substrates by Y-type deposition. We also investigated the frequency characteristics of LB modified glass by QCM. We investigated morphology of arachidic acid by AFM. As a result, we obtained the frequency characteristic and morphology of LB films from controlling the deposited layers.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1995.05a
• /
• pp.77-80
• /
• 1995

Enhancing the electrical conductivity of the ultrathin organic films using Langmuir-Blodget technique is important step for the developement of molecular electronic device. The Octadecylviologen-TCNQ was synthesized with Octadecylviologen-Bromide an Lithium TCNQ Sine Octadecylviologen-TCNQ has two TCNQ snion radicals, the conductivity of LB film is expected to increase. The $\pi$-A isotherm showed that the limiting area was 150${\AA}$$\^$2/ molecule and the silid-like transition surface pressure was 25 mN/m. The electronic transition of the TNCNQ anion radical was observed at 400 nm. Intermolecular charge transfer absorption was observed at 600nm and 850~1050 nm which ay resulted from the TCNQ anion radical dimer formation. The electrical conductivity of the viologen -TCNQ LB film was 10$\^$-6/cm This values was 100 times higher than that of the quinolinium-TCNQ and pyridinium-TCNQ LB films.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.752-755
• /
• 2002

Since Metallo-Porphyrin (MP) is very interesting compound due to its unique electronic and redox properties and it is also chemically and thermally stable, MP has been studied for potential memory and switching devices. In this study, thin films of 5,10,15,20 - Tetrakis - Octadecyloxymethylphenyl - Porphyrin - Zn(II) (Zn-TPP) were prepared by the Langmuir-Blodgett (LB) method and characterized by using UV/vis absorption spectroscopy and cyclic voltammetry. It was found that the proper transfer surface pressure for film deposition was 25 mN/m and the limiting area per molecule was $135{\AA}^2$/molecule. The current-voltage (I-V) characteristics of these films were investigated.

• Journal of the Korean Applied Science and Technology
• /
• v.20 no.2
• /
• pp.177-181
• /
• 2003

Ultra-thin films of amphiphillic squarylium dye were prepared on the hydrophillic substrate by Langmuir-Blodgett(LB) technique. In this study, the photoelectric properties of a amphiphillic squarylium dye LB film was investigated. The visible light(${\lambda}$ = 684nm ) of xenon lamp was illuminated on the amphiphillic squarylium dye LB films and light absorptivity and photoconductivity were observed. The photoconductivity was nearly constant regardless of nominal layer number. The photoelectric properties of the amphiphillic squarylium dye LB films with bottom electrode showed better than that top electrode.