• Journal of the Korean Applied Science and Technology
• /
• v.26 no.4
• /
• pp.451-456
• /
• 2009

We carried out this experiment to observe an electrochemical properties for LB films of alkyl compounds by the cyclic voltammetry. Alkyl bromides was deposited by using the Langmuir- Blodgett method on the ITO glass. We measured to an electrochemical measurement by using cyclic voltammetry with a three-electrode system(an Ag/AgCl reference electrode, a platinum wire counter electrode and LB film-coated ITO working electrode) in 0.5, 1.0, 1.5 and 2.0 N $NaClO_4$ solution. A measuring range was reduced from initial potential to -1350 mV, continuously oxidized to 1650 mV. The scan rate were 100 mV/s. As a result, an electrochemical properties of the LB films of alkyl bromides appeared irreversible process caused by only the oxidation current from the cyclic voltammogram. The diffusivity(D) effect of LB films decreased with increasing of alkyl compounds amount.

• Journal of the Korean Applied Science and Technology
• /
• v.19 no.1
• /
• pp.43-48
• /
• 2002

We carried out this subject to observe photoisomerization using 1,2-dioleoyl-sn- glycero-3-phosphocholine(DOPC) mixed with fatty acid containing azobenzene group which has reversible to cis-trans by light irradiation. Spreading solutions for the LB films were prepared in chloroform($5.0{\times}10^{-5}$mol/L).We investigated the photoisomerization and property of the organic ultra thin film of fatty acid containing azobenzene was prepared on the hydrophilic ITO(idium tin oxide) glass plate by LB method. As a result, the absorption spectra of 8A5H and DOPC of mixture LB films was induced to photoisomerization by alternating irradiation of ultraviolet and visible light, because the condensation of pure azobenzene monolayers was loosened by the introduction of phospholipid into the monolayers, and the molecular high aggregation in pure azobenzene monolayers is also weakened by the introduction of phospholipid. We found that it was reversibly induced to cis-trans photoisomerization in several solvents and mixture LB films.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.8
• /
• pp.724-731
• /
• 2006

We investigated the electrochemical properties for Langmuir-Blodgett (LB) films mixed with 4-octyl-4'-(5-carboxylpentamethyleneoxy)azobenzene (denoted as 8A5H) and phospholipid(L-a-dimyristoylphosphatidylcholine, denoted as DMPC and L-a-dilauroylphosphayidylcholine, denoted as DLPC). The LB films of 8A5H, 8A5H-DMPC and 8A5H-DLPC mixture monolayers were deposited by using the LB method on the indium tin oxide(ITO) glass. The electrochemical properties measured by using cyclic voltammetry with a three-electrode system, an Ag/AgCl reference electrode, a platinum wire counter electrode and LB film-coated ITO working electrode at various concentrations(0.1, 0.5, and 1.0 mol/L) of $NaClO_4$ solution. A measuring range was reduced from initial potential to -1350 mV, continuously oxidized to 1650 mV and measured to the initial point. The scan rates were 50, 100, 150 and 200 mV/s, respectively. As a result, LB films of 8A5H and 8A5H-DLPC mixture monolayers appeared irreversible process caused by only the oxidation current from the cyclic voltammogram and LB films of 8A5H-DMPC monolayer mixture was found to be caused by a reversible oxidation-reduction process.

• Proceedings of the KIEE Conference
• /
• 1993.07a
• /
• pp.3-5
• /
• 1993

The use of preformed polymers and their cross-linking have been attempted in order to improve the intrinsic fragility of monolayers and Langmuir-Blodgett (LB) films and to make their technological applications possible. It has shown that an imidization followed a polyion-complexation can stabilize the LB films against heat and solvents. And, when the polymer structure was property designed, concurrent removal of the alkyl tails together with imide formation could be accomplished. In this paper, we present a characteristic monolayer behavior of polymer with pendent polyethers and carboxyls, it's polyion-complexed LB film with subphase polymer PAA, and a possible skeletonization of the LB film by thermal imidization. Also, deposition status of LB films are evaluated by using QCM.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.537-539
• /
• 1993

The use of preformed polymers and their cross-linking have been attempted in order to improve the intrinsic fragility of monolayers and Langmuir-Blodgett(LB) films and to make their technological applications possible. It has shown that an imidization followed a polyion-complexation can stabilize the LB films against heat and solvents. And, when the polymer structure was properly designed, concurrent removal of the alkyl tails together with imide formation could be accomplished. In this paper, we present a characteristic monolayer behavior of polymer with pendent polyethers and carboxyls, it's polyion-complexed LB film with subphase polymer PAA, and a possible skeletonization of the LB film by thermal imidization. Also, deposition status of LB films are evaluated by using QCM.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.44 no.4
• /
• pp.496-501
• /
• 1995

The N $O_{2}$ gas-detection characteristics were investigated using the functional organic Langmuir-Blodgett (LB) films of Copper-tetra-tert-butylphthalocyanine (CuTBP), Dilithium phthalocyanine (Li$_{2}$Pc), N-docosylpyridinium TCNQ(C$_{22}$Py(TCNQ)), Polyamic acid alkylamine salts (PAAS). The optimum conditions for a film deposition were obtained through a study of .pi.-.ALPHA. isotherms and the deposited film status was confirmed by electrical and optical methods such as UV/visible absortion spectra, thickness measurements by ellipsometry, and electrical capacitances. A response of the LB films to the N $O_{2}$ gas was measured by a change of the electrical conductivities when the film is exposed to the gases. The CuTBP LB film shows the biggest change of the electrical conductivities when it is exposed to the N $O_{2}$ gases. And the order of gas-detection performance is the following;Li$_{2}$Pc, $C_{22}$Py(TCNQ), and PAAS LB films. Especially, the CuTBP and Li$_{2}$Pc LB films not only show the bigger change in the electircal conductivities when exposed to the gas, but return to the original state when the gas is desorbed.d.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1993.11a
• /
• pp.105-108
• /
• 1993

Behavior of electron in polyimide LB films of Al/polyimide LB films/Au (MIM) structures is reported in the present paper. From experimental results, it is known that there is a process where electron moves from Au electrode to Al electrode through LB film. And the electrons are presumed to move by diffusion since the direction is opposite to electric field.

• Journal of the Korean Applied Science and Technology
• /
• v.13 no.1
• /
• pp.75-85
• /
• 1996

The absorption spectra of synthesis of long chain fatty acid containing azobenzene start from p-(p'-hydroxy phenyl azo)-benzoic acid was investigated by ultraviolet spectrophotometery in chloroform solvent at the various temperature. In addition, The pressure-area of the water-air interface was obtained and the LB film was fabricated onto a quartz slide and quartz crystal by conventional Langmuir-Blodgett(LB) method. The UV absorption spectra of Langmuir-Blodgett(LB) film on quartz slide and spectrum of monolayer formed on quartz crystal have been measured. Long chain fatty acid containing azobenzene are induced phtoisomerization by the application of u. v. and visible light irradiation alternatively the reversibility of phtoisomerization was more clear difference when the number of $C_{n}$ increased but, not so good at $C_{14}-azo$. At the pressure-area isotherms, the value of surface pressure increment were decreased when the number of $C_{n}$ increased. A surface pressure of 20mN/m was obtained as a proper one for a film deposition. The photoisomerization at LB films were induced by application of UV and visible light irradiation alternatively. So the LB film of long chain fatty acid containing azobenzene has possibility to being applied to functional molecular devices such as photomemory and light switching.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.4
• /
• pp.754-760
• /
• 2013

We investigated an electrochemical properties for Langmuir-Blodgett (LB) monolayer films of sphingomyelin(SP) and polyamic acid(PAA) mixture(1:1, 2:1 and 3:1 molar ratio). LB monolayer films of mixture was deposited by the LB method on the indium tin oxide(ITO) glass. The electrochemical properties measured by cyclic voltammetry with three-electrode system in 0.1N $KClO_4$ solution. As a result, LB monolayer films of SP and PAA mixture was appeared on irreversible process caused by the reduction current from the cyclic voltammogram. Diffusion coefficient(D) in the SP and PAA mixture was calculated $2.670{\times}10^{-5}$, $3.562{\times}10^{-5}$ and $1.005{\times}10^{-5}cm^2s^{-1}$ at 1:1, 2:1 and 3:1 molar ratio, respectively.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.1
• /
• pp.64-70
• /
• 2013

We investigated an electrochemical properties for Langmuir-Blodgett (LB) monolayer films of sphingomyelin and polyamic acid(1:1 molar ratio) mixture. LB monolayer films of mixture was deposited by the LB method on the indium tin oxide(ITO) glass. The electrochemical properties measured by cyclic voltammetry with three-electrode system in $KClO_4$ solution. The current of reduction and oxidation range was measured from 1650 mV to -1350 mV, continuously. The scan rates were 50, 100, 150, 200 and 250 mV/s, respectively. As a result, LB monolayer films of sphingomyelin and polyamic acid mixture was appeared on irreversible process caused by the reduction current from the cyclic voltammogram. Diffusion coefficient (D) in the sphingomyelin and polyamic acid mixture was calculated $2.67cm^2s^{-1}{\times}10^5$, $5.23cm^2s^{-1}{\times}10^6$ at 0.1 N and 0.2 N $KClO_4$ solutions, respectively.