• Economic and Environmental Geology
• /
• v.47 no.6
• /
• pp.601-610
• /
• 2014

Udo is the site of a short-lived monogenetic submarine volcanic vent which builts basaltic clastic deposits below sea level, by early Surtseyan-type explosive eruption and later effusive lava eruptions. Mineral assemblage, major and trace element chemistry indicate that the Someori sub-alkaline lava flows were related to the WPTB(within plate tholeiitic basalt) rather than IAT(island-arc tholeiite) and that the geotectonic regime of Korean Peninsula went away from the subduction zone after the Later Miocene.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.800-803
• /
• 2004

This paper describes the design and implementation of the T=1 protocol based on lava Card. The T=1 protocol implemented in this paper complies with ISO/IEC 7816 standard. Also, JCOS(Java Card Operating Systems) including the contactless card protocol conforms to Java Card 2.2.1 specification and is running on 32-bit ARM7/TDMI processor. The protocol stack proposed and implemented in this paper is easy to maintenance of protocol independently. To verify the T=1 protocol implemented in this paper we tested the T=1 protocol scenarios defined in ISO/IEC 7816-3 Annex A. And we tested using USIM(Universal Subscriber Identity Module) cards, which include the implemented T=1 protocol. The T=1 protocol was tested and passed all against the specification 3GPP TS 31.122, which was the Conformance Test Specification for USIM cards including the test suites of both transmission protocols.

• Toxicological Research
• /
• v.30 no.4
• /
• pp.277-282
• /
• 2014

To develop a composition for enhancing immunity, based on alcohol extracts of the bumblebee as an active ingredient, bumblebee ethanol extracts were evaluated for their protective effect in chronic models of inflammation, adjuvant induced rat arthritis. B. terrestris worker extract (SDIEX) and, B. hypocrita sapporoensis lava and pupa extract (SPDYBEX), significantly decreased paw edema in arthritic rats, at a dose 100 mg/kg, respectively. The cytokine levels related inflammation of COX-2, $sPLA_2$, VEGF, and TNF-${\alpha}$, were decreased, compared to positive control, indomethacin (5 mg/kg). Histopathological data demonstrated decreases inflammatory activity, hind paw edema, and repaired hyaline articular cartilage in DRG over a 2 wk administration. HPLC and GC-MS analysis of SDIEX and SPDYBEX revealed the presence of cantharidin.

• Journal of The Geomorphological Association of Korea
• /
• v.19 no.4
• /
• pp.27-37
• /
• 2012

This study investigated granite landforms formed by Hantan-gang fluvial erosion and deposition, or by weathering in the area neighboring the Seungil-gyo bridge in Cheorwon-gun Gangwon-do Korea, in which the contact zone of Myeongseongsan granite and Cheorwon lava plateau creates a unique landform. Major granite landforms are deeply weathered hill, sheet erosional landform, paleo-landform surface and paleosoil, micro-fluvial landforms such as pothole and groove, granite rampart, sand bar and boulder bar, former riverbed. And river cliffs on a weakly weathered dome act as a barrier to lateral shifting of the river.

• Korean Journal of Environmental Agriculture
• /
• v.41 no.3
• /
• pp.217-221
• /
• 2022

BACKGROUND: Gotjawal forest on Jeju Island is characterized by uneven topography that developed as a result of freezing-thawing weathering process and irregular substrates caused by numerous lava-flow collapses. Sanyang Gotjawal, located in southwest of Jeju Island, is a well-developed forest with a long history. In addition to photographs, there is a need for a good way to describe the unique features of Gotjawal, including its geology and vegetation. METHODS AND RESULTS: We illustrated the area's natural features using Clip Studio Paint 1.12.0. To reveal its complexity, we separated the vegetation and geological features in the illustrations. CONCLUSION(S): We drew a cross-section of Gotjawal's unique layers, including lava flows. In addition to an eco-geological approach, we described the dominant vegetation and geological characteristics of the three forest layers (trees, shrubs, and herbs) in Gotjawal.

• Journal of Soil and Groundwater Environment
• /
• v.29 no.4
• /
• pp.21-31
• /
• 2024

Sumgol in Jeju Island plays a significant role in groundwater recharge due to its permeable hydrogeological characteristics. However, a quantitative assessment of the interrelationship between rainfall characteristics and rainwater inflows into Sumgols has not yet been conducted. Therefore, this study examined the characteristics of rainwater inflow into three Sumgols located in the eastern and western regions of Jeju Island and assessed hydrogeologic factors influencing these inflows. During two rainfall events, the studied locations in Sumgol exhibited different characteristics of rainwater inflows, despite experiencing similar rainfall events. Additionally, the delay time for rainwater to reach the Sumgol locations after the rainfall was influenced more by rainfall intensity than by cumulative amount of rainfall. In Sumgols located in non-volcanic ash soil with low hydraulic conductivity, such as those in agricultural areas, rainwater inflows were observed even with small rainfall and low rainfall intensity. This study suggests that rainfall intensity, soil characteristics, permeability of lava flows, and land use are key factors influencing rainwater inflow into Sumgols, revealing that soil characteristics and the permeability of lava flows have a greater impact on surface runoff than land use.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.4
• /
• pp.409-419
• /
• 2008

Statement of problem: At all times people have tried to fabricate tooth restorations using tooth colored materials. Recently, demands for esthetics, even in restorations requiring strength, has brought a revolution to dentistry and increased use of zirconia. The basic color of zirconia is white to ivory. The color can be partially adapted by veneering it with ceramic materials. However, it would be better if the substructure could already be adapted to the basic color shade of neighboring teeth. By adaptation to the basic shade, it can help to reduce the necessary layer thickness of the veneer ceramic to achieve the desired color. Purpose: The purpose of this study was to spectrophotometrically evaluate the influence of shading of zirconia core on the final shade of all-ceramic restorations using the CIE $L^{*}a^{*}b^{*}$ system. Material and methods: Core specimens (n = 20 per group) of Lava Frame Zirconia, KaVo Everest Zirconia, Digident CAD/CAM Zirconia were fabricated at 20 mm in diameter and 0.5 mm in thickness. Halves of each groups were shaded in A3 color. These core specimens were veneered with A3 porcelain of the recommended manufacturer at thickness of 0.5 mm. CIE $L^{*}a^{*}b^{*}$ coordinates were recorded for each specimen with a spectrophotometer (Model CM-2600d, Minolta, Japan) at 0.5 mm, 0.4 mm, 0.3 mm in thickness. Color differences were calculated using the equation ${\Delta}E^{*}=[({\Delta}L^{*})2+({\Delta}a^{*})2+({\Delta}b^{*})2]1/2$. Results: 1. In the case where porcelain layer has a thickness of 0.5 mm, Lava Frame Zirconia and KaVo Everest group did not show clinically perceived color difference, however Digident CAD/CAM Zirconia group showed clinically perceived color difference according to shade allowed on core. 2. When the thickness of porcelain layer decreased from 0.5 mm to 0.4 mm, Lava Frame Zirconia and KaVo Everest group did not show clinically perceived color difference, on the other hand Digident CAD/CAM Zirconia group showed clinically perceived color difference according to shade allowed on core. 3. When the thickness of porcelain layer decreased from 0.5 mm to 0.3 mm, clinically perceived color differences were observed from all three groups. Conclusions: Ziroconia system, which is possible to allow shade on core, are thought to be much more favorable to reproduce natural shade compared to systems that is impossible to give shade. Therefore, clinicians ought to choose adequate system for certain clinical situation by considering above specific character.

• Journal of the Speleological Society of Korea
• /
• no.63
• /
• pp.1-8
• /
• 2004

The non-magnetic materials with non-conductive showing high structure dispersity were developed on the base of natural quartz and lava-scoria which was collected from Je-ju island in Korea, and treated by methane-chemical technology those were obtained novel properties of magnetization through the analyzing. Depending on the processing conditions and subsequent applications the materials produced by strong methane-chemical reaction (MCR) in alcohol solution showed concurrently magnetic, dielectric and electrical properties. The obtained magnetic-electrical powders classified by aggregate complex of their features as segnetomagnetics, containing a dielectric material as a carrying nucleus, particularly the quartz on that surface one or more layers of different compounds were synthesized having thickness up to 10～50 nm and showing magnetic, electrical and other properties. It was confirmed in magnetizing process that powders of quartz and lava-scoria produced by MCR were better oil adsorbent as of oleophilic and floating matter on water surface although their specific gravities are comparably more than 1 in quartz or less than unity, as that of water, in lava-scoira. Therefore, it will be Possible and very useful to remove low density and light gravity oil spillage in difficult recovery from sea and inland water contamination spread on water surface, by marine accident and ship sinking accident occurring frequently in recent years, by way of magnetic adsorbent conveyer system in continuous, if it could be built up the mass Production system of water-floating magnetizable oleophilic adsorbent materials with use of iow cost and good Qualify lava-scoria spread on volcano district in Je-ju island. And, there will also be urgent advent of necessity with strong possibility to develop useful applications of various magnetic functional materials include oleophilic adsorbent for removal of sea oil-contaminants and maritime pollutants, and other kinds of various utilities in industrial applications and practical uses of novel functional materials in the fields of environments and health care applications with in deep expectation.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.45 no.4
• /
• pp.363-372
• /
• 2019

The leaves and stems of Centella asiatica have a long history of their usage as a medicine for the treatment of skin diseases such as ulcers and psoriasis, especially in Asia. Triterpenoids, the active components of Centella asiatica including asiaticoside, madecasosside, asiatic acid and madecassic acid, have shown to inhibit skin inflammation as well as improve skin photoaging. The main objective of this study is to investigate whether the Centella asiatica ripened with lava seawater which is rich in minerals known to be beneficial to human body can provide anti-inflammatory and moisturizing effects to skin. HPLC analysis showed that the concentration of triterpenoids increased further after ripening Centella asiatica with lava seawater. In order to confirm the inflammatory efficacy of the extract of the extract of the ripened Centella asiatica, the production of NO in LPS-activated RAW 264.7 cells and the expression of inflammatory cytokines in PM10 or UVB-induced HaCaT cells were observed. We found that the extract of the ripened Centella asiatica inhibited the expression of NO, IL-6, IL-8, and TNF-a and had higher inhibitory effect compared to the extract of the non-ripened Centella asiatica. In order to confirm the skin moisturizing effect, we investigated the synthesis of HA in HaCaT cells. The result showed HA production was enhanced in a concentration-dependent manner from the ripened group, while there was no efficacy from the non-ripened group. Taken together, it is concluded that the extract of the Centella asiatica ripened with lava seawater was effective in anti-inflammation and moisturization.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.3
• /
• pp.253-264
• /
• 2010

The purpose of this study is to know whether Yttrium-stabilized-tetragonal -zirconia-polycrystal(Y-TZP ceramic) gets enough shear bond strength for clinical uses by applying veneering composite resin through surface treatment on it and finally to compare it with the case of applying veneering porcelain. LavaTM zirconia frameworks(3M ESPE, Seefeld, Germany) were prepared. Group P was manufactured with LavaTM Ceram(3M ESPE, Seefeld, Germany) in cylindrical shape which has 4mm diameter, 5mm height. Group ZSR disposed sandblasting and applied silane, bonding agent and after that indirect composite resin was applied. Group ZRR got tribochemical coating by RocatecTM system(3M ESPE. Seefeld, Germany) and treated silane. Finally Group ZPR took the same treatment and applied LavaTM Ceram in the size of 0.3-0.5mm height. After burning out, sandblasting, HF and silane was applied. And then, indirect composite resin was applied. 1000 cycle thermocycling was performed in $5-55^{\circ}C$ and shear bond strength was measured. There were no significant differences between combining veneering porcelain to Y-TZP ceramic group and combining veneering resin to Y-TZP ceramic group in the aspect of shear bond strength (p>.05).