• The Research Journal of the Costume Culture
• /
• v.25 no.2
• /
• pp.175-191
• /
• 2017

The purpose of this study is to analyze the body mass index(BMI) and foot characteristics of senior-generation women and to use those values to develop a standard shoe last for producing shoes that best fit the foot of senior-generation women. In order to develop a standard shoe last that reflects the BMI and foot characteristics of senior-generation women, I analyzed the morphometric characteristics of feet by conducting descriptive statistics for each item. The foot characteristics based on BMI were analyzed by conducting ANOVA and Duncan's tests via the foot's measured values. Subsequently, I developed a standard shoe last reflecting the BMI and the foot characteristics of senior-generation women by applying all those values. Senior-generation women showed significant differences among three groups based on BMI-normal weight, overweight, and obese-in all the items except for medial ball width and toe 5 angle. Through these values, I realized that as the value of the BMI becomes higher, the size of the foot becomes larger. This suggests that as a woman's weight increases or decreases, her shoes need to be replaced as well as her clothes. Deviations in the toe-side parts of the shoe could cause deformation of the foot. If someone keeps wearing shoes produced using a shoe last with a large deviation, she risks developing foot conditions like hallux valgus. This situation points to the need for shoe manufacture that utilizes a standard shoe last that reflects the BMI and foot characteristics of the senior generation.

• Journal of Preventive Medicine and Public Health
• /
• v.34 no.3
• /
• pp.237-243
• /
• 2001

Objectives : To examine the screening rate of cervical cancer in women and to find out the predictive factors for participation in cervical cancer screening programs within their life-time and within the last two years. Methods : The data was based on self-reported questionnaires from 1,613 women whose ages ranged from 26 to 60 years; this survey was peformed between December 1999 and January 2000. This study analyzed the predictive factors for participation in cervical cancer screening programs within their life-time and within the last two years. A logistic regression analysis was performed in order to derive the significant variables from the predisposing factors(demographic factor, health promotion behavior, reproductive factor), intervention factors(information channel, relation with medical stan, and proximal factors(attitude, social influence, self-efficacy). All analyses were peformed by the PC-SAS 6.12. Results : Our analyses showed that the screening rate for the women who received a cervical cancer screening(Pap smear) more than once within their life-time was 56.1% while those who had received one within the last two years was 34.5%. The significant factors for participation in cervical cancer screening program within their life-time were their income, married age, health promotion score, relation with medical staffs, social influence, and self-efficacy. On the other hand, age, number of pregnancies, menarche age, relation with medical staffs, social influences, and self-efficacy were significant factors for those being screened within the last two years. The predictive power of the logit model within their life-time was 68.8% and that within the last two years was 66.6%. Conclusion : The predictive factors for participation in cervical cancer screening program within their life-time are different from those for within the last two years. and that women's relations with medical staffs and social influences were the critical factors impacting on cervical cancer screening rates.

• KIISE Transactions on Computing Practices
• /
• v.20 no.9
• /
• pp.507-512
• /
• 2014

Recently, Distributed computing processing begins using both CPU(Central processing unit) and GPU(Graphic processing unit) to improve the performance to overcome darksilicon problem which cannot use all of the transistors because of the electric power limitation. There is an integrated graphics processor that CPU and GPU share memory and Last level cache(LLC). But, There is no LLC access rules between CPU and GPU, so if GPU and CPU processes run together at the same time, performance of both processes gets worse because of the contention on the LLC. This Paper gives evidence to prove the need of the Cache Partitioning and is mentioned about the cache partitioning design using page coloring to allocate the L3 Cache space only for the GPU process to guarantee GPU process performance.

• Journal of Korean Foot and Ankle Society
• /
• v.15 no.3
• /
• pp.139-143
• /
• 2011

Purpose: The purpose of this study was to introduce the 'Matrixplasty' for the treatment of a severely incurved toenail with growth plate deformity and to report our results treating this disease entity. Materials and Methods: Between January 2010 and May 2010, 48 consecutive patients (62 cases) underwent treatment of symptomatic incurved toenails with the 'matrixplasty'. The mean period of time at last follow-up was $14.0{\pm}1.3$ months. The recurrence rate and complication rate were evaluated. An American Orthopedic Foot and Ankle Society (AOFAS) forefoot hallux score was assigned and patients were evaluated at pretreatment and the last follow-up meeting. For evaluation of improvement in toenail shape, the center to edge angle of the toenail was measured at pretreatment and last follow-up. Results: All ingrown toenails healed and the nail deformity was corrected within 3 weeks after the procedure. Among the 62 cases, four cases had recurred by the last follow-up. The mean pretreatment AOFAS forefoot hallux score was $73.1{\pm}12.8$, and it improved to $98.7{\pm}1.1$ by the last follow-up (p<0.01). The mean center to edge angle of the toenail improved from $53.3{\pm}12.9$ degrees to $18.2{\pm}7.4$ degrees by the last follow-up (p<0.01). Minor paronychia, which was managed with local wound dressing and oral antibiotics, was identified in eight cases. Conclusion: Matrixplasty showed excellent clinical results in the treatment of severe incurved toenail (pincer nail) and this procedure also showed great improvement of the deformed toenail and its growth plate.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.4
• /
• pp.295-301
• /
• 2020

When a spacecraft in deep space falls into an abnormal state, an emergency communication channel between ground and the spacecraft is essential in order to perform analysis to the cause of the anomaly, and to remedy the spacecraft from the distressed state. Because the recovery actions generally comprises of long and complicated sequences of commands, the transmission of the recovery commands may require a reliable and a delay tolerant networking technology based on bundle routing. While the delay tolerant networking protocol becomes a prominent method interfacing ground and space into a internet-like Solar system network because it can address the issues of the severe communication problems in deep space, the communication system on the spacecraft which based on space packet protocol cannot use the delay tolerant networking technology directly. So a community of the consultative committee for space data systems starts a discussion of the first-hop last-hop mechanism to establish a feasible concept and standardization. This paper presents an enhanced concept of the first-hop last-hop by applying it a virtual cislunar communication environment, and we believe this contributes to make a way applicable to an interoperable relay concept of the first hop last hop between the delay tolerant networking and space packet protocol standard.

• Journal of Mushroom
• /
• v.3 no.4
• /
• pp.159-171
• /
• 2005

The supply and demand of mushrooms has increased dramatically as the standard of living has increased and the nutritional and medical value of the mushrooms has been discovered. However, in meeting the demand, the profitability of the mushroom is being reduced. Even though there are many different types of and uses for mushrooms, the overall output production for the last ten years has consistently increased 5.9% per year, and for the last five years('00~'04) 5.2 % per year, and for the last 3 years('02~'04) 2.9% per year- the rate of increase has slowed. Looking at the standard gross income from mushroom production, it has increased 5.2% over the last nine years('95~'03), 1.6% over the last 4 years('00~'03), and 3.2% over the last 3 years('02~'04)-the annual gross income is decreasing. Even though the farmers are producing more mushrooms, the annual gross income is not increasing enough to keep up with the production, and therefore the profitability of mushrooms is decreasing. Since 2002, the constant increase of the output of edible mushrooms such as the Common Mushroom, Oyster Mushroom, King Oyster Mushroom and Winter Mushroom has resulted in a price declines. Before 2004, Korea mainly exported mushrooms, but after 2004 Korea mainly imported mushrooms. The mushroom industry of Korea is nearing the end of the stage of 'supplying domestic demand.' The stages are as follows: demand raised ${\rightarrow}$ supply domestic demand ${\rightarrow}$ export ${\rightarrow}$ country with developed mushroom industry. Therefore, we should have an efficient system to promote the exportation of mushrooms. Not only the exportation of mushroom itself but also the exportation of mushroom spawn, cultivation techniques and processing facilities should be our goal when we formulate the policy.

• Korean Journal of Construction Engineering and Management
• /
• v.7 no.4 s.32
• /
• pp.146-153
• /
• 2006

The Last Planner(LP), of which the goal is to improve work-flow reliability, has recently been introduced in Korea. It is found that some contractors have made efforts on applying the Last Planner to their projects. However, they face difficulties for a variety of reasons. This paper presents the case study results on Korean heavy civil projects, along with descriptions of the ways that the Last Planner was applied, and how the work flow reliability was improved. It also discusses the prerequisites and barriers to implementation of the Last Planner in applying heavy civil construction projects in Korea. The results can be used as a reference for companies to improve their work flow reliability for future projects.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.19 no.4
• /
• pp.93-104
• /
• 2017

This study is a basic study to develop shoe last design technology to enhance and revitalize the competitiveness of the handmade shoes. In-depth interviews were conducted with four manufacturers in Seongsu-dong to identify the production status and design technology of shoe lasts. The result of the research is as follows. Firstly, shoe lasts for adults are produced at intervals of 5mm between 245mm-285mm for men's shoes, and between 220-260mm for women's shoes. The production rate of women's shoes was high in the order of general type, boot type, and sandal type while men's shoes mainly produce general type. Secondly, the master last size and ball girth rating for men's and women's shoes were analyzed to EE-EEE grade at 260mm and D grade at 235mm. The length of the master last for men's shoes is 276-290mm, the heel width is 60-65mm, the ball width is 88-90mm, the ball girth is 250mm, and the waist girth is 248mm. The length of the master shoe last for women's shoes is 236-245 mm, the heel width is 50-55mm, the ball width is 78-80mm, the ball girth is 211~213mm, and the waist girth is 213~215mm. Thirdly, the last grading deviation is 5mm in length, the heel width is 0.5mm, the ball girth is 3.5mm, and the ball with is 1.2mm. The ball girth dimensions of Oxford type, slip-on type, and sneakers type are made at 250mm, 248mm, and 245mm for men's shoes. For women's shoes, the ball girth dimensions of pump type, loafer & boot type, and sandal type are made at 211~213mm, 214~215mm, and 211mm. Fourthly, t+he construction of the automation system is insufficient and almost completely depends on manual production.

• Journal of Hospice and Palliative Care
• /
• v.2 no.2
• /
• pp.109-113
• /
• 1999

Purpose : Because we don't have inappropriate health care system for the terminal cancer patients, there were abnormal behavior patterns of health care utilization. So, There were needs to develop the comprehensive care for terminal cancer patients. Increased attention is being paid to the futility of life-sustaining treatment and high cost of management of terminal cancer patients Materials and Methods : This study was performed on cancer patients, registered in 1996 Central Cancer Registry, who were as insured person of Korea Medical Insurance and died from January 1997 to June 1998. We studied the day of medical care and medical expenses of 151 cancer patients evaluable. Results : The mean day of inpatient care was 39 days, and the mean days of outpatient care was 14 days in study subjects. Mean expenses per day of medical care, day of inpatient, and day of outpatients care were 85,392 won, 105,908 won, and 40,173 won. 95% of medical expenses is paid to the general hospital, and 85% of medical expenses was paid for inpatient care. About half of all medical expenses in th last 6 months were incurred in the last 60 days of life, and about 30 percent were incurred in the last 30 days. Expenses of outpatients care increased between 6 month and 3 months, after which they decreased. Expenses of inpatients care increased during all last 6months Conclusion : The distribution or medical expenses during the last 6 months in our study is similar to the distribution of American Medicare costs. We need to study medical expenses during the last year of life with large scale and details in order to develop the plan about the management of terminal cancer patient.

• The Korean Journal of Quaternary Research
• /
• v.22 no.2
• /
• pp.42-42
• /
• 2008