• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.278-281
• /
• 2009

Selective laser sintering(SLS), a kind of rapid prototyping technology, can provide a process to form many types of coatings. Coated layers by selective laser melting are highly influenced by substrate, powder and laser parameters such as laser power, scan rate, fill spacing and layer thickness. Therefore an attempt to fabricate Fe-Ni-Cr coating on AISI H13 tool steel has been performed by selective laser sintering. In this study, Fe-Ni-Cr coating was produced by experimental facilities consisting of a 200W fiber laser which can be focused to 0.08mm and atmospheric chamber which can control atmospheric pressure with Ar. With power increase or energy density decrease, line width was decreased and line surface quality was improved with energy density increase. Surface quality of coating layer was improved with fill spacing optimization or layer thickness decrease.

• Journal of Welding and Joining
• /
• 제20권3호
• /
• pp.109-115
• /
• 2002

In this study high power Nd:YAG laser welding of structural steel was investigated. For the test steel blocks of $50{\times}50{\times}200mm$ were cut and machined, and bead-on-plate weld was made on the machined surface. Argon, nitrogen, helium, dry air or mixed gases were used to find the effect of shielding conditions on the bead formation. Results demonstrated that there were Fe I rich region and Fe II rich region in the laser induced plasma column based on the spectral analysis with S-2000 field spectrometer The Fe I region was located at the root of the column near keyhole opening. On the other hand, Fe II region was found at the middle of the plasma column. In the Nd:YAG laser welding, Fe I region emitted continuum which had peak value at wave length of around 710nm, and Fe II region had the peak at 580nm. In the welding of steel by $CO_2$ laser, however, no continuum was observed. There showed two groups of strong spikes in the $CO_2$ laser welding; the first group was displayed at the wave band of 450-560nm. This spike group emitted stronger intensity of light and sharper peaks than those group at 680-800nm.

• 대한공간정보학회지
• /
• 제14권3호
• /
• pp.79-86
• /
• 2006

현재 3차원 지상 레이저 스캐너를 통해서 짧은 시간에 대상물의 수많은 위치에 대한 고정도의 3차원 좌표를 얻을 수 있다. 그래서 최근에 지상 레이저 스캐닝은 측지분야를 포함하여 토목공학, 고고학 및 건축, 그리고 응급서비스 및 국방, 기타 등 다양한 분야에서 널리 응용되고 있다. 본 연구는 지상 라이다를 이용한 현황측량을 다루었으며, 실험측량 결과 대상물의 선형 특징추출이 가능하였으며 토탈스테이션 측량성과에 필적하는 위치결정 정확도를 얻었다. 이를 통해 향후 항공 라이다와 항공사진측량기술과의 결합에 의해 지상 레이저 스캐닝의 잠재응용분야는 더욱 증대될 것으로 기대된다.

• 한국전기전자재료학회논문지
• /
• 제22권5호
• /
• pp.431-435
• /
• 2009

The apparatus has been fabricated using the laser diode and microprocessor unit. The apparatus used a InGaAlP laser diode for laser medical therapy and was designed for a pulse width modulation type to increase stimulation effects. To raise the stimulus effect of the human body, the optical irradiation frequency could be set up. The study has executed in-vivo experiment by employing our own developed laser diode irradiation system to investigate the effects of the InGaAlP laser diode irradiation on the wound healing as a preliminary study aimed at the application of InGaAlP laser diode to wound healing of human skin injury. The study cut out whole skin layers of Sprague-Dawley rat on the back part in 1 cm circle and observed developing effects after executing light irradiation for 9 days, and in result it is found that the light irradiation rat showed earlier wound healing than non-irradiation rat during the experimental period. In addition, there are some differences found regarding the healing process between laser diode irradiated rats and non-irradiated ones.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1154-1159
• /
• 2004

Laser beam welding is increasingly being used in welding of structural steels. The laser welding process is one of the most advanced manufacturing technologies owing to its high speed and deep penetration. The thermal cycles associated with laser welding are generally much faster than those involved in conventional arc welding processes, leading to a rather small weld zone. Experiments are performed for Inconel 600 plates changing several process parameter such as laser power, welding speed, shielding gas flow rate, presence of surface pollution, with fixed or variable gap and misalignment between plate and plate, etc. The follow conclusions can be drawn that laser power and welding speed have a pronounced effect on size and shape of the fusion zone. Increase in welding speed resulted in an increase in weld depth/ aspect ratio and hence a decrease in the fusion zone size. The penetration depth increased with the increase in laser power . Welding characteristics of austienite Inconel 600 using a continuous wave Nd:YAG laser are experimentally investigated. This paper describes the weld ability of inconel 600 for machine structural use by Nd:YAG laser.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 춘계학술발표대회
• /
• pp.36.2-36.2
• /
• 2009

In this work, the high power CW Nd:YAG laser has been used for thermal treatment of inkjet printed Ag films-involving eliminating organic additives (dispersant, binder, and organic solvent) of Ag ink and annealing Ag nanoparticles. By optimizing laser parameters, such as laser power and defocusing value, the laser energy can totally be converted to heat energy, which is used to thermal treatment of inkjet printed Ag films. This results in controlling the microstructures and the resistivity of films. We investigated the thermal diffusion mechanisms during laser annealing and the resulting microstructures. The impact of high power laser annealing on microstructures and electrical characteristic of inkjet printed Ag films is compared to those of the films annealed by a conventional furnace annealing. Focused ion beam (FIB) channeling image shows that the laser annealed Ag films have large columnar grains and dense structure (void free), while furnace annealed films have tiny grains and exhibit void formation. Due to these microstructural characteristics of laser annealed films, it has better electrical property (low resistivity) compared to furnace annealed samples.

• 한방안이비인후피부과학회지
• /
• 제29권2호
• /
• pp.106-111
• /
• 2016

Objective : The aim of this study is to report the effect of Hani-maehwa laser(fractional mode) treatment on acne scar. Methods : The patient with atrophic facial acne scars was treated with 5 sessions of laser therapy at 4-week intervals. The therapeutic response to treatment was assessed at 3 months after last laser session. The treatment effect was evaluated by standardized photography, anti aging, skin brightness and flatness. That was measured by micro fluorescence measurement camera(ECO SKIN, Cuvitz Inc.) in 16(left zygoma) and 26(right zygoma) spot. And side effects were also checked. Results : Atrophic facial acne scars have improved markedly. Anti aging, skin brightness and flatness were improved. Especially anti aging and flatness were noticeably improved. Adverse effects were not reported.Conclusions : Korean medicine cautery method applies to high level laser(CO₂ Hani-maehwa laser). These are different designs but same principle. It can be considered that laser therapy is effective method for treating acne scars.

• 한국광학회지
• /
• 제18권3호
• /
• pp.208-215
• /
• 2007

광섬유 연결 반도체레이저 여기 세라믹 Nd:YAG 레이저의 열렌즈를 보상하기 위한 공진기를 구성하였다. 초점거리 30 mm, 유효직경 22 mm인 보상렌즈를 레이저 매질의 단면으로부터 25 mm 떨어진 곳에 위치시켜 열렌즈 효과를 보상하였다. 보상렌즈가 없는 경우 레이저 출력은 열렌즈 효과에 의해 여기파워 6 W 이상에서 급격히 감소하기 시작하였으며, 12 W에 이르러서는 레이저가 거의 발진되지 않았다. 열렌즈 효과가 보상되었을 경우 레이저 출력은 선형적으로 증가하였으며, 여기파워 12 W에서 $M^{2}$값은 2.4로 좋은 빔질을 나타내었다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 춘계학술대회 논문집
• /
• pp.279-283
• /
• 2003

As the state of the art in recent years Laser-Arc Hybrid welding is tried actively because of its various economical and technical advantages. In this study, melting tendencies according to the variation of laser-arc distance are investigated in case of YAG laser-TIG Hybrid welding process of AH32 ship structural steel. Nd-YAG laser with a laser beam power of 3KW is used and varied laser-arc distance 0mm to 10mm with fixing the TIG current as l00A. There is certain distance between laser and TIG elecrode to improve welding heat input and also increase the penetration.

• Journal of Welding and Joining
• /
• 제20권1호
• /
• pp.34-40
• /
• 2002

The laser strengthening of $35kgf/\textrm{mm}^2$ grade steel sheet is investigated by using $CO_2$ laser beam irradiation. The increase of tensile strength is dominated by the number of fully penetrated melting lines. Also, the optimal laser irradiation pattern is obtained by 3-point bending test. Local laser strengthening clay be effective for the weight reduction of automobile components where the tailored welded blank can not be applied.