• Journal of the Korean Wood Science and Technology
• /
• v.49 no.1
• /
• pp.57-66
• /
• 2021

In recent years, the use of cross laminated timber (CLT) has been evolving. In addition, CLT manufactured with various species such as Japanese cedar has been developed to utilize the local resources in each country. However most factories in Japan produce CLT by bonding the laminae in width direction for orthogonal layers, where grain of element is perpendicular to the grain of outer layer, and this process is considered to be one of the factors that reduce productivity. A new wood based material (hereinafter referred to as Ply-lam) using wooden panel such as plywood for the orthogonal layer was developed in order to improve productivity in CLT manufacturing and improve quality. Japanese cypress lamina was used for the parallel layer, where grain of element is parallel to the grain of outer layer, of CLT and Korean larch plywood was used for the orthogonal layer, in order to effectively use Korean larch and expand the utilization of Japanese cypress. The cross-sectional construction of the Ply-lam was 5-layers 5-plies, and the dimensions were 1000 mm (width) × 150 mm (depth) × 4000 mm (length). As a performance evaluation of the manufactured Ply-lam, strength tests such as out-of-plane bending, in-plane bending, out-of-plane shearing and in-plane shearing tests were carried out. As the result of this study, Ply-lam composed of Japanese cypress lamina panels and Korean larch plywood showed very higher out-of-plane bending strength compared to the standard strength of CLT. And the result obtained in other tests seems to show a sufficiently high value.

• Journal of Electrochemical Science and Technology
• /
• v.13 no.2
• /
• pp.292-307
• /
• 2022

The study presents kinetics of degradation and mineralization of an anti-epileptic drug Lamotrigine (LAM) in the aqueous matrix by electrochemical advanced oxidation process (EAOP) on Ti/DSA (Ta₂O₅-Ir₂O₅) and Stainless Steel (SS) anodes using sodium sulphate as supporting electrolyte. On both the anodes, kinetic behaviour was pseudo-first-order for degradation as well as mineralization of LAM. On Ti/DSA anode, maximum LAM degradation of 75.42% was observed at an associated specific charge of 3.1 (Ah/litre) at a current density of 1.38 mA/cm² and 100 ppm Na₂SO₄ concentration. Maximum mineralization attained was 44.83% at an associated specific charge of 3.1 (Ah/litre) at a current density of 1.38 mA/cm² and 50 ppm concentration of Na₂SO₄ with energy consumption of 2942.71 kWh/kgTOC. Under identical conditions on SS anode, a maximum of 98.92% LAM degradation was marked after a specific charge (Q) of 3.1 (Ah/litre) at a current density of 1.38 mA/cm² and 100 ppm concentration of Na₂SO₄. Maximum LAM mineralization on SS anode was 98.53%, marked at a specific charge of 3.1 (Ah/litre) at a current density of 1.38 mA/cm² and 75 ppm concentration of Na₂SO₄, with energy consumption of 1312.17 kWh/kgTOC. Higher Mineralization Current Efficiency (MCE) values were attained for EAOP on SS anode for both degradation and mineralization due to occurrence of combined electro-oxidation and electro-coagulation process in comparison to EAOP on Ti/DSA anode due to occurrence of lone electro-oxidation process.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.12
• /
• pp.1023-1029
• /
• 2015

Laser-assisted machining (LAM) is one of the most effective methods for enhancing the machinability of difficult-to-cut materials, such as titanium alloys and various ceramics, and has been studied by many researchers. LAM is a method that facilitates machining by softening a workpiece using a laser heat source. The advantages of the LAM process are decreases in tool wear, cutting force, and surface roughness. However, when the material is over-heated, melting or burning can occur. This study analyzed the heat source distribution with regard to overlapping of preheating on the laser heating path with an acute angle, a right angle and obtuse angles. Then, a power reduction method was proposed to reduce the melting and burning of the workpiece.

• Journal of Pharmacopuncture
• /
• v.20 no.3
• /
• pp.194-200
• /
• 2017

Moringa oleifera Lam. or munga is one of the most important plant widely cultivated in India. It belongs to family Moringaceae. This plant is widely used as nutritional herb and contains valuable pharmacological action like anti-asthmatic, anti-diabetic, hepatoprotective, anti-inflammatory, anti-fertility, anti-cancer, anti-microbial, anti-oxidant, cardiovascular, anti-ulcer, CNS activity, anti-allergic, wound healing, analgesic, and antipyretic activity, Moringa oleifera Lam. The plant is also known as Horse - radish tree, Drumstick tree. Every part of this plant contains a valuable medicinal feature. It contain rich source of the vitamin A, vitamin C and milk protein. Different types of active phytoconstituents like alkaloids, protein, quinine, saponins, flavonoids, tannin, steroids, glycosides, fixed oil and fats are present. This plant is also found in the tropical regions. Some other constituents are niazinin A, niazinin B and niazimicin A, niaziminin B. The present review discusses the phytochemical composition, medicinal uses & pharmacological activity of this plant.

• Korean Journal of Plant Taxonomy
• /
• v.38 no.4
• /
• pp.531-537
• /
• 2008

We report an unrecorded species of Corydalis sect. Corydalis (Fumariaceae), C. caudata (Lam.) Pers., that have been found in the central part of Korea. This species is easily recognized by its bearded calyx, upwardly curved spur, and multi-branched characteristics. We named it 'Soo-yeom-hyeon-ho-saek' as korean common name.

• Journal of Positioning, Navigation, and Timing
• /
• v.5 no.1
• /
• pp.29-36
• /
• 2016

In this paper, performance on receivers of multilateration (MLAT) system that uses ADS-B signal, which is recently becoming popular, was analyzed to overcome shortcomings of existing aircraft flight control systems or reinforce the capabilities. A link budget was analyzed using a channel model in the airport environment with regard to Local Area Multilateration (LAM) for ground-controlled landing around the airport. In order to detect signals that arrived at the receiver successfully, sensitivity of receiver was analyzed using a signal-to-noise ratio (SNR) worksheet, and a method that improves accuracy of the distance measurement was proposed by adopting a peak estimation using sampling signals. Through simulations, optimum specifications of receivers were analyzed to have high precision positioning of LAM, and accuracy of LAM distance measurements was presented.

• Korean Journal of Microbiology
• /
• v.25 no.1
• /
• pp.52-56
• /
• 1987

The evidences that Lam B protein of E. coli is used as a receptor for infections of bacteriophage N4 as well as bacteriophage lambda were obtained from the following experimental results. First, all of the isolated lambda resistant dlones possessing foreign DNA fragments in the plasmids were also resistant to bacteriophage N4, but not to bacteriophage $\phi$ 80, T4 and T7. Second, when the plasmid DNA was treated with various restriction enzymes and ligated to delete the total or a portion of the foreign DNA fragments, the deleted plasmids lost the resistant activities to lambda and N4, simultaneously. Third, after amplification of Lam B protein about 200 times by inducing the protein using maltose as a sole carbon source, the host E. coli became sensitive to both lambda and N4.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1347-1348
• /
• 2006

기존 반도체공정들이 갖는 리소그래피와 식각 등의 공정단계를 배제하는 direct-write 공정을 이용하여 친환경적인 이점을 가질 수 있는 나선형 인덕터의 구조를 제안하고 주파수 특성을 확인하였다. 인덕터의 구조는 Si를 $300{\mu}m$, $SiO_2$를 $3{\mu}m$으로 하였으며, CU 코일의 폭과 선간의 간격은 LAM 공정과 direct-write 공정을 이용할 수 있도록 각각 $100{\mu}m$으로 설정하여 3회 권선하였다. 인덕터는 200-500MHz 범위에서 3.5nH의 인덕턴스, 4GHz에서 최대 29 정도의 품질계수를 가지며, SRF는 2.6GHz로 시뮬레이션 결과를 얻을 수 있었다.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.18 no.2
• /
• pp.151-156
• /
• 1998

This study was conducted to evaluate the forage yield and quality of Fesrulolium bmunii(Festuca prafensis Huds. x Lolium multiflomm Lam.) as a forage sources. The experiment was arranged in a randomized block design with four replications from Sep. 1995 to May 1998 at Chungnam University. Treatments consisted of two forage species, Festulolium bmunii(Pau1ita) and Dactylis glomerc;d4Potomac). The dry matter yields, nutritive value, N and energy balance were observed. The yields of DM, CPDM and DDM per area(ha) were higher for Potomac (P< 0.01) than for Paulita. The content of CP showed no difference between Potomac and Paulita, but NDF, ADF and lignin contents of Paulita were absolutly lower than those of Potomac (P<0.05). The retained N and energy were also high for Paulita compare to for Potomac. It could be suggested that Paulita has higher potential for improvement of the forage quality than Potomac and it have a potential to provide as a forage sources.

• Journal of the Korean Wood Science and Technology
• /
• v.16 no.1
• /
• pp.21-44
• /
• 1988

As a way for the effective utilization of pallman chips and sawdusts, these furnish materials were combined with non-woody material of plastic (polypropylene) screen in board manufacturing to improve their weak physical and mechanical properties. The conventional boards were made with conditions of specific gravity 0.40, 0.55, 0.70, and 0.85, resin content 8, 10, 12 and 14%, and number of polypropylene screen 1, 2, 3 and 4, and press-lam boards were also manufactured. The physical and mechanical properties were measured and discussed on thickness swelling, bending modulus of rupture and elasticity, tensile strength, internal bond strength, and screw holding strength. The results obtained at this study were summarized as follows: 1. In thinckness swelling both of pallman chip board and sawdust board were improved by the increase of resin content, and press-lam boards showed lower thickness swelling than conventional boards. 2. Both the modulus of rupture and elasticity were increased with the increase of specific gravity, and press-lam boards showed higher modulus of rupture and elasticity than conventional boards. On the other hand, modulus of rupture was increased with the increase of number of polypropylene screen and resin content whereas these effects in modulus of elasticity was not recognized. 3. Tensile strength was increased with the increase of specific gravity, and the boards combined with polypropylene screen showed higher tensile strength than control boards. Also tensile strength was increased with the increase of number of polypropylene screen, and press-lam boards revealed higher tensile strength than conventional boards. 4. Internal bond strength was increased with the increase of specific gravity, and the boards combined with polypropylene screen were lower in internal bond strength than control boards. Also, the boards combined with odd number of polypropylene screen showed lower internal bond strength than those combined with even number of polypropylene screen. 5. Screw holding strength was increased with the increase of resin content and specific gravity but significant difference was not approved between boards combined with polypropylene screen and control boards. In press-lam boards, pallman chip boards of higher specific gravity but sawdust boards of lower specific gravity showed better screw holding strength than control boards.