• Food Science and Preservation
• /
• v.13 no.2
• /
• pp.216-222
• /
• 2006

Microwave energy (2450 MHz) was applied to extract health-effective component (HEC) from grape seed. Three different solvents approved for grape seed extract such as water, ethanol and acetone, were confirmed in their microwave-heating properties and by which extraction efficiencies were determined. Microwave-assisted extraction (MAE) was performed under different parameters; microwave power : (0, 50, 100 and 150), time : (1, 3, 5, 7, and 9 min), the sample to solvent ratio : (1:20, 1:10, 1:5 and 1:2.5), and particle size(whole, 20, 40 and 60 mesh) and the subsequent extracts were used for determining their physicochemical properties, such as total yield : (TY), total phenolics : (TP), catechin content : (CC), electron donating ability : (EDA), and browning color. The heating properties of solvent demonstrated the optimal ranges of microwave and time as 100 W and 2 to 6 min. The TY and HFC content were higher with increasing powers in water and ethanol solvent, while HFC content were lower in acetone at over 100 W. The longer of extraction time up to 5 min, the higher extraction efficiency. Based upon the overall MAE efficiency and solvent recovery, it was found optimal to use 10 times volume of ethanol for 10 mesh of seed particle at 100 W.

• Journal of Conservation Science
• /
• v.25 no.3
• /
• pp.299-316
• /
• 2009

The Goryeo roof tiles from the Oegol site in Tangjeong, Asan are classified into three groups in color such as gray, red yellow and gray-yellow groups, respectively. While each group of tiles shows characteristic specific gravity, absorption ratio, LOI and vitrification degree, mineral content and distribution, and chemical composition are generally homogeneous among all groups of roof tiles. Also, all roof tiles and soils from the site show similar geochemical behavior of elements and clay-mineralization degree. This indicates that the soil from the site is probable to be a raw material of the roof tiles. Firing temperature of the roof tiles is estimated as 950 to $1,050^{\circ}C$ for the gray group, 800 to $900^{\circ}C$ for the red yellow group, and 900 to $950^{\circ}C$ for the gray-yellow group. In conclusion, roof tiles from the Oegol site is interpreted to be made of local clay without additive minerals, applying various firing conditions and standardized purifying process of raw clay materials.

• Journal of Digital Convergence
• /
• v.14 no.2
• /
• pp.183-190
• /
• 2016

This paper proposes algorithm to reduce the computing time in a neural network that reduces transmission of data for tracking mobile objects in surveillance networks in terms of detection and communication load. Object Detection can be defined as follows : Given image sequence, which can forom a digitalized image, the goal of object detection is to determine whether or not there is any object in the image, and if present, returns its location, direction, size, and so on. But object in an given image is considerably difficult because location, size, light conditions, obstacle and so on change the overall appearance of objects, thereby making it difficult to detect them rapidly and exactly. Therefore, this paper proposes fast and exact object detection which overcomes some restrictions by using neural network. Proposed system can be object detection irrelevant to obstacle, background and pose rapidly. And neural network calculation time is decreased by reducing input vector size of neural network. Principle Component Analysis can reduce the dimension of data. In the video input in real time from a CCTV was experimented and in case of color segment, the result shows different success rate depending on camera settings. Experimental results show proposed method attains 30% higher recognition performance than the conventional method.

• Conservation Science in Museum
• /
• v.6
• /
• pp.55-66
• /
• 2005

Three types of epoxy resins (Epo-Tek 301, Araldite 103, and Araldite 106) and three types of pigments (bunche, pastel, and conté), which are materials for porcelain restoration, were selected as examination materials. The tone change, porosity, and sedimental resulting from the mixtures of varying ratios of these three materials were observed. Samples were also made from the mixture of Epo-teck 301, four kinds of white pigments, and six types of fillers and subjected to ultraviolet ray penetration for 200 hours to observe the oxidation of the epoxy resins. The result showed that the chemical composition of pastel drastically changed when mixed with Epo-tek 301. Although bunche and conté displayed clear colors, those of conté were less clear when it was mixed with other substances. Adding a small amount of Epo-tek 301 tended to be driven into the corner, whereas mixing a large amount caused saturation and boiling. On the other hand, AW 106 did not display clear colors owing to its high viscosity; when mixed in large amounts, however, the clarity of colors improved. For AY 103, a similar standard of color clarity was maintained regardless of the mixture ratio. The following was ranked according to the level of porosity: [Pastel>bunche≒conté]. In terms of sedimentary, however, [bunche>conté>Pastel], [Epo-tek 301> AY 103> AW 106]. The result of measuring the degree of yellowing revealed that titanium, pastel, silicon dioxide, and kaolin tended to turn yellow, whereas bunche, conté, diatomaceous earth, and calcium hydroxide tended to resist yellowing.

• Korean Journal of Food Science and Technology
• /
• v.7 no.2
• /
• pp.61-68
• /
• 1975

This study was conducted (1) to isolate the film-forming yeast from the commercially available soy sauce, (2) to identify the state of soy sauce fermentation by the use of yeasts, (3) to confirm characteristics of yeasts. The result were as follows. 1. These yeast strains in the soy sauce fermentation test showed full fermentation of whole sugar content, reduction of the pure extract and relative reduction in total nitrogen. Soy sauce color was somehow faded to lower the stability of soy sauce. 2. In anti-fungal activity test butylparaben at a higher level 60 ppm., sodium propionate 2,400 ppm, sodium benzoate 800 ppm., menadion 165 ppm, showed their anti-fungal effect, while alcohol did not show the effect in the 3% additive group. 3. The optimum sodium chloride concentration for these strains in the 2% G.Y.P. medium was 5% and optimum temperature was $30^{\circ}C$. The extinction temperature was $62^{\circ}C$ for strain No-1 and No-3, and was $65^{\circ}C$ for No-2 and No-4. 4. The film-forming soy sauce turned out in the gas chromatogram to possess much flavor of low boiling point as compared with the standard. These flavors were considered due to flavor spoilage of the soy sauce. 5. These isolated yeasts were identified Saccharomyces rouxii (film-forming yeast) in the Lodder's taxanomic study.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.43 no.4 s.310
• /
• pp.74-86
• /
• 2006

This paper proposes a robust and computationally efficient algorithm for automatic video object segmentation. For implementing the spatio-temporal segmentation, which aims for efficient combination of the motion segmentation and the color segmentation, an SOM-based hierarchical clustering method in which the segmentation process is regarded as clustering of feature vectors is employed. As results, problems of high computational complexity which required for obtaining exact segmentation results in conventional video object segmentation methods, and the performance degradation due to noise are significantly reduced. A measure of motion vector reliability which employs MRF-based MAP estimation scheme has been introduced to minimize the influence from the motion estimation error. In addition, a noise elimination scheme based on the motion reliability histogram and a clustering validity index for automatically identifying the number of objects in the scene have been applied. A cross projection method for effective object tracking and a dynamic memory to maintain temporal coherency have been introduced as well. A set of experiments has been conducted over several video sequences to evaluate the proposed algorithm, and the efficiency in terms of computational complexity, robustness from noise, and higher segmentation accuracy of the proposed algorithm have been proved.

• Conservation Science in Museum
• /
• v.4
• /
• pp.71-78
• /
• 2003

The wooden striker on the Divine Bell of King Seongdeok was examined to identify the species of the wood and the outdoor wood weathering caused by solar light, moisture, temperature and air. The species of the wooden striker was identified to Zelkova serrata. When observed the striker with naked eyes, the results were surface discoloration (graying), cracking and roughness. In order to examine the morphological changes according to deterioration type, the specimen were separated to three part(I, II,III-spot). The I-spot was discolored to gray and at the same time entirely covered with dust. So the observation was impossible. The II-spot was also discolored but its texture could be observed. On it could observe numerous fungal hypae and dirts like dust flown into the cell lumens. The cell wall has been so weakened by weathering that it lost the physical intensity. This have made microchecks and splits on the cell wall. Although fungal hypae covered the cell, they did not result in wood decay. The III-spot, located just 0.5 mm below the surface, was maintaining the natural red-brown color of the wood. Its cell wall was similar to that of sound wood. These changes are different from wood decay, and limited only to the surface of the striker-less than or equal to 0.5 mm below.

• Applied Biological Chemistry
• /
• v.31 no.2
• /
• pp.154-161
• /
• 1988

In order to improve the quality of amino acid soysauce, this experiment was carried out as follows; koji added amino acid soysauce(KAAS) was prepared by addition of defatted soybean and meal koji into amino acid soysauce containing $0.5%{\sim}1.5%$ of total nitrogen. Various physicochemical characteristics of KAAS during aging were determined. Total nitrogen, amino-nitrogen, specific gravity, pure extract, total acidity and color were high in KAAS at high total nitrogen. After one month aging, reducing sugar was high in KAAS at high total nitrogen, but pH was high in KAAS at low total nitrogen. Ethyl alcohol was 2.07% in KAAS at 0.5% of total nitrogen after five months aging and 1.4% in KAAS at 1.5% of total nitrogen. Levulinic acid and lactic acid were high in KAAS at low total nitrogen. The results obtained above summarized as the quality of KAAS were highly good at $0.5{\sim}0.7%$ of total nitrogen after two or three months aging.

• Korean journal of applied entomology
• /
• v.42 no.4
• /
• pp.293-300
• /
• 2003

This study examined the foraging activities and the Influence of excessive foraging activity by B. ignitus workers on the quality of cherry-tomato fruits in cherry-tomato green-house. The peak time of pollination by B. ignitus worker was recorded at 8:00 and the average of foraging time on each flower was 11.7 secs. The total pollinating time of B. ignitus was 41 mins and 37 secs and its total number of visiting flowers was 195.2. The average time of staying on flowers was 8.8 ${\pm}$5.4 secs when two bumblebees were allowed to pollinate per Pyong (3.954 square yards) in the green house of tomatoes for 24 hours, but it was two times shorter (4.0${\pm}$3.1 secs) compared with that when one bumble-bee was allowed to pollinate per Pyong for one hour. The stamen color of tomato flowers visited by the bumblebee for one hour was brown while the stamen color for 24 hours was dark brown due to the frequent visiting. The average fruit bearing rate of the 4th-6th clusters of tomatoes visited for one hour was 48.9%, which was not significantly different from those allowed to visite for 24 hours. However, the number of seeds of flowers visited for 24 hours was 64.0, which was more than 55.3 seeds of flowers visited for one hour. The weight of fruit was 25.4 g and 24.4 g, respectively. The sweetness was not different significantly between one and 24 hours of visit (P > 0.05). The result revealed that end pro-duct of cherry-tomato was not influenced by over foraging activity of B. ignitus workers on tomato flowers.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.1
• /
• pp.208-227
• /
• 2013

Twenty-seven bronze bowls excavated from the Goryo burial complex at Deobu-gol were examined for their microstructure and chemical composition to characterize the bronze technology practiced by commoners at the time. Results showed that the objects examined can be classified into four groups: 1) objects forged out of Cu-near 22%Sn alloys and then quenched; 2) objects cast from Cu-below 10% Sn alloys containing lead; 3) objects cast from Cu-10%~20% Sn alloys containing lead and then quenched; 4) objects forged out of Cu-10~20% Sn alloys containing lead and then quenched. This study revealed that the fabrication technique as determined by alloy compositions plays an important role in bronze technology. The use of lead was clearly associated with the selection of quenching temperatures, the character of inclusions and the color characteristics of bronze surfaces. It was found that the objects containing lead were quenched at temperatures of $520^{\circ}{\sim}586^{\circ}C$ while those without lead were quenched at the range of $586^{\circ}{\sim}799^{\circ}C$. The presence of selenium in impurity inclusions was detected only in alloys containing lead, suggesting that the raw materials, Cu and Sn, used in making the lead-free alloys for the first group were carefully selected from those smelted using ores without lead contamination. Furthermore, the addition of lead was found to have significant effects on the color characteristics of the surface of bronze alloys when they are subjected to corrosion during interment. In leaded alloys, corrosion turns the surface light green or dark green while in unleaded alloys, corrosion turns the surface dark brown or black. It was found that in fabrication, the wall thickness of the bronze bowls varies depending on the application of quenching; most of the quenched objects have walls 1mm thick or below while those without quenching have walls 1mm thick or above. Fabrication techniques in bronze making usually reflect social environments of a community. It is likely that in the late Goryo period, experiencing lack of skilled bronze workers, the increased demand for bronze was met in two ways; by the use of chief lead instead of expensive tin and by the use of casting suitable for mass production. The above results show that the Goryo bronze workers tried to overcome such a resource-limited environment through technological innovations as apparent in the use of varying fabrication techniques for different alloys. Recently, numerous bronze objects are excavated and available for investigation. This study shows that with the use of proper analytical techniques they can serve as a valuable source of information required for the characterization of the associated technology as well as the social environment leading to the establishment of such technology.