• 전기학회논문지
• /
• 제67권1호
• /
• pp.142-147
• /
• 2018

Private electrical facilities are judged whether it is suitable for the insulation aging condition of their incoming underground cables using DC leakage current test method. In the case where the service point of utility is the secondary side of cut out switch installed in the electric pole, there is a problem that it is difficult to separate the lightning arresters(LA) because of their high position of the pole. Therefore, the field test voltage is applied at value lower than DC 30 kV, which are stated in the inspection guideline. However, this test could reduced the insulation performance of the LA by accelerating the electrical stress of the metal oxide varistor element in the pre-breakdown region. In this study, we analyzed the relationship between the DC test voltage and the leakage current using the non-destructive DC high voltage equipment with leakage current measurement function. The results show that the leakage current increases sharply above the specified test voltage. As a consequence, it could be contributed to improve insulation aging inspection method by selecting the possible test area on the VI characteristic curve of the pre-breakdown area of the LA.

• 한국세라믹학회지
• /
• 제34권10호
• /
• pp.1060-1066
• /
• 1997

In this paper, the effects of La addition of PLZT thin film prepared by sol-gel method on the capacitor characteristics are investigated for gigabit generation DRAM applications. The addition of La on the PLZT capacitor results in a trade-off between charge storage density(Qc') and leakage current density(Jl). As La content increases, Qc' and permeability(εr) at 0V are reduced while Jl is significantly decreased. It is demonstrated that 5% La doping of PZT can substantially reduce Jl and also improve resistance to fatigue while incurring only minimal degradation of Qc'. Very low leakage current density (5×10-7 A/㎠ even at 125℃) and high charge storage density (100fC/㎛2) under VDD/2=1V conditions are achieved using 5% La doped PZT thin films for gigabit DRAM capacitor dielectrics. In addition, the fatigue and TDDB measurements indicate good reliability of the PLZT capacitors.

• Transactions on Electrical and Electronic Materials
• /
• 제7권4호
• /
• pp.189-195
• /
• 2006

The microstructure, electrical and dielectric properties, and stability against DC accelerated aging stress of the varistors, which are composed of quaternary system $ZnO-Pr_6O_{11}CoO-Cr_2O_3-based$ ceramics, were investigated for different $La_2O_3$ contents. The increase of $La_2O_3$ content led to more densified ceramics, whereas abruptly decreased the nonlinear properties by incorporating beyond 1.0mol%. The highest nonlinearity was obtained from 0.5mol% $La_2O_3$, with the nonlinear coefficient of 81.6 and the leakage current of $0.1{\mu}A$. The varistors doped with 0.5mol% $La_2O_3$ exhibited high stability, in which the variation rates of breakdown voltage, nonlinear coefficient, leakage current, dielectric constant, and dissipation factor were -1.1%, -3.7%, +100%, +1.4%, and +8.2%, respectively, for stressing state of $0.95V_{1mA}/150^{\circ}C/24h$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.422-425
• /
• 2001

The electrical properties of ZnO-$Pr_6O_{11}$-CoO-$Cr_2O_3-La_2O_3$ based varistors were investigated with sintering temperature in the range of $1240\sim1300^{\circ}C$. The varistors sintered at $1240\sim1260^{\circ}C$ exhibited high density, which was 5.50- $5.70g/cm^3$ corresponding to 95.2~98.6% of theoretical density. The varistor voltage was decreased in range of 718.47~108.00 V/mm with increasing sintering temperarture. The varistors sintered at $1240\sim1260^{\circ}C$ exhibited good electrical properties, in which the nonlinear exponent is in the range of 79.25~49.22 and leakage current is in the range of 0.26~$1.00 {\mu}A$ In particular, the varistor sintered at $1240^{\circ}C$ showed very excellent electrical properties, in which the nonlinear exponent is 79.25 and leakage current is $0.26{\mu}A$

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.422-425
• /
• 2001

The electrical properties of ZnO-Pr$_{6}$O$_{11}$-CoO-Cr$_2$O$_3$-La$_2$O$_3$ based varistors were investigated with sintering temperature in the range of 1240~130$0^{\circ}C$. The varistors sintered at 1240~126$0^{\circ}C$ exhibited high density, which was 5.50~5.70 g/㎤ corresponding to 95.2~98.6% of theoretical density The varistor voltage was decreased in range of 718.47~108.00 V/mm with increasing sintering temperature. The varistors sintered at 1240~126$0^{\circ}C$ exhibited good electrical properties, in which the nonlinear exponent is in the range of 79.25~49.22 and leakage current is in the range of 0.26~1.00 $\mu$A. In particular, the varistor sintered at 1240\`c showed very excellent electrical properties, in which the nonlinear exponent is 79.25 and leakage current is 0.26 $\mu$A.A.A.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.415-418
• /
• 2001

The I-V characteristics and its stability of ZPCCL-based ceramic varistors doped with La$_2$O$_3$in the range of 0.0~4.0 mol% were investigated. The density of ceramics was increased in the range of 4.7~5.8 g/cm$^3$ with increasing La$_2$O$_3$content. As La$_2$O$_3$content is increased, the varistor voltage was decreased in the range of 503.49-9.42 V/mm up to 2.0 mol%, whereas increasing La$_2$O$_3$content further caused it to increase. The ZPCCL-based varistors were characterized by nonlinearity, in which the nonlinear exponent is in the range of 3.05~82.43 and leakage current is in the range of 0.24-100.22 $\mu$A. Among ZPCCL-based varistors, 0.5 mol% added-varistors exhibited an excellent nonlinearity, in which the nonlinear exponent is 82.43 and the leakage current is 0.24 $\mu$A. Furthermore, they exhibited a high stability, in which the variation rate of the varistor voltage and the nonlinear exponent was -1.11% and -6.72%, respectively, under DC stress, such as (0.80 V$_{1mA}$9$0^{\circ}C$/12h)+(0.85 V$_{1mA}$115$^{\circ}C$//12h) +(0.90 V$_{1mA}$12$0^{\circ}C$//12h)+(0.95 V$_{1mA}$1$25^{\circ}C$//12h)+(0.95 V$_{1mA}$15$0^{\circ}C$//12h). Consequently, it was estimated that ZPCCL-based ceramics will be applied to development of Pr$_{6}$O$_{11}$ based ZnO varistors having a high performance.e.rformance.e.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 C
• /
• pp.416-418
• /
• 2000

Thin films of phase-pure perovskite $(Pb_{0.72}La_{0.28})Ti_{0.93}O_3$ (PLT) were deposited in-situ onto Pt/Ti/$SiO_2$/Si substrates by pulsed laser deposition. We have systematically investigated the variation of grain sizes depending on the process condition. Both in-situ annealing and ex-situ annealing treatments have been compared depending on the annealing time. The grain sizes of PLT thin films were successfully controlled 260 to 350 nm by changing process parameters. Microstructural and electrical properties of the film were investigated by C-V measurement, leakage current measurement and SEM. Two-step process to grow $(Pb_{0.72}La_{0.28})Ti_{0.93}O_3$ (PLT) films was adopted and verified to be useful to enlarge the grain size of the film and to enhance the leakage current characteristics.

• 한국재료학회지
• /
• 제11권2호
• /
• pp.151-154
• /
• 2001

상부전극, Pt, Ir, 그리고 $IrO_2$, 에 따라 수소 열처리전과 후, 그리고 회복열처리시 누설전류특성을 고찰하였다. Pt/PLZT/Pt 케페시터는 수소열처리 후에 다시 회복열처리를 수행하면 완전히 이력곡선의 회복을 보이며 또한 피로특성도 거의 회복 된다. Pt과 IrO$_2$ 상부전극의 경우의 진 누설전류 특성은 열처리조건에 관계없이 강한 시간 의존성을 갖는 space-charge influenced injection모델에 적합하다. 반면에 Ir 상부전극의 경우는 Ir과 PLZT 사이의 계면에 헝성된 전도성 상인 $IrO_2$로 인해 높은 누설전류 밀도를 보이면서 relaxation current 영역이 없이 steady state 영역을 보이는, 주로 Schottky barrier 모델에 의해 설명된다.

• 한국전기전자재료학회논문지
• /
• 제11권11호
• /
• pp.969-974
• /
• 1998

The effects of $La_2O_3$on the microstructure and electrical characteristics of Pr-based ZnO varistors were investigated. The average grain size increased in the range of 21.9~56.3$\mu$ m with increasing $La_2O_3$additive content(0.0~2.0 mol%). La was, of course grain boundary, largely segregated at the nodal point. As $La_2O_3$additive content increases, threshold voltage and nonlinear coefficient decreased and leakage current increased. In particular, 2.0 mol% $La_2O_3$-added varistor exhibited low threshold voltage 17.0V/mm and nonlinear coefficient of about 6. Based on these results, this varistor can be said to be used as low-voltage varistor, if nonlinear coefficient is somewhat improved forward.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.383-386
• /
• 2004

DC accelerated aging characteristics of Zn-Pr-Co-Cr-La oxides-based varistors were investigated with various sintering temperatures. The varistors sintered at $1240^{\circ}C$ exhibited the highest nonlinearity, with a nonlinear exponent of 79.3 and a leakage current of $0.3\;{\mu}A$, whereas completely degraded because of thermal runaway owing to low sintered density. The varistors sintered at $1250^{\circ}C$ exhibited not only a high nonlinearity with the nonlinear exponent 61.4 and the leakage current 0.7 ${\mu}A$, but also a high stability with the variation rates of varistor voltage and nonlinear exponent are -1.01% and -10.67%, respectively, under DC stress condition such as $(0.85\;V_{1mA}/115^{\circ}C/24\;h)+(0.90\;V_{1mA}/120^{\circ}C/24\;h)+(0.95\;V_{1mA}/125^{\circ}C/24\;h)+(0.95\;V_{1mA}/150^{\circ}C/24\;h)$.