• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.3
• /
• pp.283-288
• /
• 2011

In this paper, an adaptive signal tracking loop for a GPS L1/L2C/L5 receiver is designed. The design parameters is adjusted according to the receiver's operating conditions such as the signal strength and the receiver dynamics by using the different characteristics of GPS L1, L2C and L5 signal. Simulation results show that the tracking accuracy of the proposed signal tracking loop is better than those of L1, L2C and L5 only signal tracking loop.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.5
• /
• pp.723-730
• /
• 2011

The GPS modernization program offered a new civil signal on the L2 band, and the first modernized GPS Block IIR satellite was launched in September 2005. Currently, eight GPS Block IIRM satellites and two Block IIF satellites transmit L2C signal. The L2C signal contains two codes of CM and CL that are much longer than the L1 C/A code. Thus, the acquisition of the CM and CL codes takes more time compared with that of L1 C/A code. Under the assumption that the L2C signal is strong enough for detection, this paper suggests rapid acquisition methods for the GPS L2C signals for software receivers and compares its performance with that of other methods.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1754-1755
• /
• 2011

GPS modernization program offers a new civil signal on L2 band and there are currently 9 GPS satellites transmitting L2C signal. The acquisition of L2C takes much time comparing with that of L1 signal. This paper suggests a fast acquisition method for the L2C GPS signals for software receivers.

• Journal of Positioning, Navigation, and Timing
• /
• v.4 no.4
• /
• pp.151-160
• /
• 2015

GPS L2C signal is a recently added civil signal to L2 frequency and is constructed by time division multiplexing of civil moderate (L2-CM) and civil long (L2-CL) code signals. While the L2-CM code is 20 ms-periodic and modulates satellite navigation message, the L2-CL code is 1.5s-periodic with 767,250 chips long code sequence and carries no data. Therefore, the L2-CL code signal allows receivers to perform a very long coherent integration. However, due to the length of the L2-CL code, the acquisition of the L2-CL code signal may take too long or require too much hardware resources. In this paper, we propose a three-step ultra-fast L2-CL code acquisition (TSCLA) technique for dual band GPS receivers. In the proposed TSCLA technique, a dual band GPS receiver sequentially acquires the coarse/acquisition (C/A) code signal at L1 frequency, the L2-CM code signal, and the L2-CL code signal to minimize mean acquisition time (MAT). The theoretical performance analysis and numerous Monte Carlo simulations show the significant advantage of the proposed TSCLA technique over conventional techniques introduced in the literature.

• Journal of Advanced Navigation Technology
• /
• v.16 no.1
• /
• pp.16-26
• /
• 2012

Pseudolites are ground-based transmitters that can be configured to emit GPS-like signals for enhancing the GPS by providing increased accuracy, integrity, and availability. However, a pseudolite (PL) can interfere with GPS satellite signals while it is transmitting or cause saturation to automatic gain control circuit. To solve these problems pulsing scheme is used, which transmits PL signal during a short period of time. In this paper the effect of the number of PL and pulsing scheme on the software GPS L1 and L2C signal acquisition performance is studied for the three pulsing schemes such as static pulsing, sweep pulsing, and pseudo random pulsing. For GPS L1 signal, static pulsing shows the best signal acquisition and tracking performance with one PL, and random pulsing shows the best performance with more than or equal to two PLs. For GPS L2C signal, all three pulsing schemes show the similar signal acquisition and tracking performance, but static pulsing shows a little better performance. For GPS L1 and L2C signals, software GPS receivers can do positioning with up to three PLs.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.8
• /
• pp.765-772
• /
• 2006

The L2 Civil Signal (L2CS) will be transmitted by modernized IIR(IIR-M), IIF and all subsequent GPS satellites. It contains two codes of different length; CM code contains 10,230chips, repeats every 20milliseconds and is modulated with message data, and CL code contains 767,250chips, repeats every 1.5second Z-count and has no data modulation. And the message data is encoded for Forward Error Correction(FEC). The long code length is useful for weak signal, but it also requires very long acquisition time. Therefore, the structure of GPS Ll/L2C Correlator and the fast acquisition scheme are proposed in this paper.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.1
• /
• pp.61-67
• /
• 2011

The GPS new civil signal is modulated on the L2 carrier at a frequency of 1227.6MHz. The L2C signal is composed of two multiplexed code signals, which include CM code with a 10,230 chip sequency repeating every 20ms, and CL code which has a 767,250 chip sequency repeating every 1.5 seconds. Thus, the new civil signal have much improved cross correlation properties so that the position fixing can be possible even with very weak signals. However, it requires very long acquisition time because of its long code length. This paper presents an efficient signal acquisition method for L2C AGPS receiver. Snapshot mode and coarse time assistance are assumed and total integration time is given by 1.5 sec. By SNR worksheet and computer simulation, it is proven that L2C signal can be acquired with very weak power less than -150dBm. Considering the acquisition time and the sensitivity, it is recommended that the highest power signal is acquired with CM code first to reduce TTFF. By the timing synchronization, at this time, search space of the code phase for other signals can be greatly reduced so that CL code can be used in signal acquisition to maximize sensitivity with small computation.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.19 no.2
• /
• pp.23-28
• /
• 2011

Michibiki is the first QZSS satellite, which was launched by a H-IIA rocket departing from the Tanegshima in Japan on 11 September, 2010 and now operated successfully. This paper presents the results obtained from processing of the L1 C/A signal transmitted from the QZSS satellite. The acquisition and tracking are performed by the L1 software receiver implemented by ETRI. The signal processing results show that QZSS L1 C/A signal is normally processed through the tracking loop results of FLL, PLL, and DLL, the EPL correlator output, and the C/No output. Finally, the paper demonstrates that the QZSS satellite could be used in the navigation system together with the GPS satellite in Korea.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2623-2626
• /
• 2003

GPS provides two services which include SPS(Standard Positioning Service) and PPS(Precise Positioning Service). While SPS users can navigate in more precise due to cancellation of SA(Selective Availability), SPS users has still less precision navigation than PPS users. L1/L2CS integrated receiver can provide more precise navigation to SPS users because the delay of Ionosphere will be cancelled by using two frequencies (L1 and L2). This paper designs an integrated L1/L2CS digital correlator to prepare the L2C signal that will be provided in 2003. Also L2CS transmitter is designed to confirm L2CS correlator.

• Journal of IKEEE
• /
• v.24 no.2
• /
• pp.649-653
• /
• 2020

GPS is a representative satellite navigation system that provides users with accurate location and time information. GPS L1 C / A is opened for civilian and thus utilized in various fields. When the satellite signal reaches the receiver, signal acquisition unit of the digital signal processing hardware searches and acquires the signal among visible satellites. The signal acquisition unit has different implementation methods depending on the signal searching method, such as serial search acquisition, parallel frequency search, parallel code phase search. In this paper, we compare and analyze the three representative acquisition hardwares using live GPS L1 C/A signals. According to the comparison, the parallel code phase search acquisition outperforms the other methods due to reduction of the number of the searchings and a high resolution.