• Korean Journal of Agricultural Science
• /
• v.31 no.1
• /
• pp.26-34
• /
• 2004

In this study, motion characteristics and power requirement of rotary tilling according to shape of conventional rotary blade were measured. This study was performed to establish factors which needed to develop energy saving rotary blade. Starting point of edged curve of imported rotary blade was faster than that of domestic rotary blade after measuring and analyzing edged curve of rotary blade. So domestic rotary blade tills much soil than imported rotary blade. In analyzing motion of rotary blade, Rotary blade of A, D type was begun to contact at part 3. Analyzing back surface of rotary blade which contact to soil at critical $\lambda$ results in contacting at e-f part. In measuring power requirement of rotary blade, specific torque and specific work of rotary blade are $160{\sim}170kgf{\cdot}m/m^2$, $3,700kgf{\cdot}m/m^3$. It shows power requirement of rotary blade according to shape of rotary blade are very different.

• Korean Journal of Health Education and Promotion
• /
• v.32 no.3
• /
• pp.97-107
• /
• 2015

Objectives: The current study aims to examine whether the influence of National Long-term Care Insurance(NLCI) on the quality of life(QoL) trajectory of older adults with disabilities is more positive than its influence on those without disabilities. Methods: Sample consisted of 5,362 elderly aged 65 and over who participated in the Korean Welfare Panel Study from Wave1 to Wave7. Data were analyzed using latent growth curve modeling. Results: Major findings are as follows. (1) Before the NLCI, the trajectories of QoL between older adults with disabilities and those without were same. (2) After the NLCI, elders with disabilities showed lower levels of QoL at the beginning, but the gaps gradually decreased with time. These results indicate that the implementation of NLCI more positively affected elders with disabilities than those without disabilities. Conclusions: These results suggest that the NLCI functions properly as one of social security nets to cope with the needs of older adults with disabilities. In conclusion, it is critical to develop a sustainable NLCI system to enhance the QoL of older adults with disabilities.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1558-1562
• /
• 2007

우리나라 지형은 전체의 70%가 산지로 이루어져 있다. 특히 강원도 지역과 같이 산지가 대부분인 지역에서는 경사도에 따라 강우에 의한 유출특성이 크게 달라질 수 있으므로 지형의 경사가 고려된 유출량 산정방식이 필요하다. 현재 유출량 산정 방식에 많이 이용되고 있는 SCS의 CN값은 미국의 중서부 지역과 같이 경사도 5%미만인 지역에서의 유출량 산정에 적합한 유출곡선지수이다. 경사도 5%에서 유출량 산정에 적합한 CN값을 우리나라의 강원도 지형과 같이 복잡하고 경사도가 심한 지역에 적용하기에는 부적합하다. 따라서 본 연구에서는 연구대상지역인 도암댐 유역의 평균 25.8% 경사도를 고려한 직접유출량을 산정하여 기존 평균 경사도 5%일 때의 직접유출량과 비교분석하였다. 본 연구의 비교분석에 있어서 직접유출의 모의가 가능한 Long-Term Hydrologic Impact Assessment (L-THIA) ArcView GIS 모델을 사용하였고 모델의 적용성 평가를 위해 수문분석에 사용되고 있는 WHAT 모듈을 이용하여 분리된 직접유출과 비교하였다. 그 결과 유출량 산정을 위해 CN값 산정시 강원도 지형과 같이 지형이 복잡하고 경사가 심한 지형에 있어서는 유역의 경사도를 고려하여 유출을 모의해야 한다는 것을 알 수 있다.

• Nuclear Engineering and Technology
• /
• v.54 no.9
• /
• pp.3205-3214
• /
• 2022

The aim of this study is to provide a clear and accessible method to obtain accurate true-stress strain data, and to extend the limited material data beyond the ultimate tensile strength (UTS) for AISI 304L. AISI 304L is used for the outer construction for some types of nuclear transport packages, due to its post-yield ductility and high failure strain. Material data for AISI 304L beyond UTS is limited throughout literature. 3D digital image correlation (DIC) was used during a series of uniaxial tensile experiments. Direct method extracted data such as true strain and instantaneous cross-sectional area throughout testing such that the true stress-strain response of the material up to failure could be created. Post processing of the DIC data has a considerable effect on the accuracy of the true stress-strain data produced. Influence of subset size and smoothing of data was investigated by using finite element analysis to inverse model the force displacement response in order to determine the true stress strain curve. The FE force displacement response was iteratively adapted, using subset size and smoothing of the DIC data. Results were validated by matching the force displacement response for the FE model and the experimental force displacement curve.

• Physical Therapy Korea
• /
• v.9 no.3
• /
• pp.39-46
• /
• 2002

In this study, vertical acceleration of center of mass was observed along normal gait phases in 9 healthy male volunteers (aged $25.7{\pm}2.18$). The developed wireless accelerometric device was attached on the intervertebral space between L3 and L4 using a semi-elastic waist belt. A three-dimensional motion analysis system, synchronized with the accelerometry, was used for detecting gait phases. There was no significant correlation between the body weight and the acceleration. The first peak curve covered loading response phase. The second downward peak point was matched accurately with the opposite toe-off. In mid-stance and terminal stance, the acceleration curve highly resembled the vertical ground reaction force curve. There was no significant difference in timing between the final upward peak point and the initial contact. Therefore, the developed accelerometry system would be helpful in determining determine temporal gait pattems in patients with gait disorders.

• Structural Engineering and Mechanics
• /
• v.55 no.4
• /
• pp.857-869
• /
• 2015

The aluminum 7075-T6 is known as an alloy widely used in aircraft structural applications, which does not exhibit strain rate sensitivity during dynamic compressive tests. Despite mechanical importance of the material, there is not enough attention to determine appropriate sample dimensions such as a sample diameter relative to the device bar diameter and sample length to diameter (L/D) ratio for dynamic tests and how these two parameters can change mechanical behaviors of the sample under dynamic loading condition. In this study, various samples which have different diameters of 31.8, 25.4, 15.9, and 9.5 mm and sample L/D ratios of 2.0, 1.5, 1.0, 0.5, and 0.25 were tested using Split Hopkinson Pressure Bar (SHPB), as this testing device is proper to characterize mechanical behaviors of solid materials at high strain rates. The mechanical behavior of this alloy was examined under ${\sim}200-5,500s^{-1}$ dynamic strain rate. Aluminum samples of 2.0, 1.5 and 1.0 of L/D ratios were well fitted into the stress-strain curve, Madison and Green's diagram, regardless of the sample diameters. Also, the 0.5 and 0.25 L/D ratio samples having the diameter of 31.8 and 25.4 mm followed the stress-strain curve. As results, larger samples (31.8 and 25.4 mm) in diameters followed the stress-strain curve regardless of the L/D ratios, whereas the 0.5 and 0.25 L/D ratios of small diameter sample (15.9 and 9.5 mm) did not follow the stress-strain diagram but significantly deviate from the diagram. Our results indicate that the L/D ratio is important determinant in stress-strain responses under the SHPB test when the sample diameter is small relative to the test bar diameter (31.8 mm), but when sample diameter is close to the bar diameter, L/D ratio does not significantly affect the stress-strain responses. This suggests that the areal mismatch (non-contact area of the testing bar) between the sample and the bar can misrepresent mechanical behaviors of the aluminum 7075-T6 at the dynamic loading condition.

• Proceedings of the ESK Conference
• /
• 1992.10a
• /
• pp.113-120
• /
• 1992

In this paper, a mathematical model of learning curve is proposed to study the finger's reaction time. The model is a logarithmic linear type which represents a learning curve appropriately, and parameters are estimated by the linear. The learning coefficient and percentage of a reaction time can be easily computed in the mathematical model. This quantitative approach provides an important information to be used for the working capability qualification for re-employment as well as for the adaptability estimation of aged workers.

• The Bulletin of The Korean Astronomical Society
• /
• v.45 no.1
• /
• pp.48.4-49
• /
• 2020

We reconstruct the expansion history of the universe using type Ia supernovae (SN Ia) in a manner independent of any cosmological model assumptions. To do so, we implement a nonparametric iterative smoothing method on the Joint Light-curve Analysis (JLA) data while exploring the SN Ia light-curve hyperparameter space by Markov Chain Monte Carlo (MCMC) sampling. We test to see how the posteriors of these hyperparameters depend on cosmology, whether using different dark energy models or reconstructions shift these posteriors. Our constraints on the SN Ia light-curve hyperparameters from our model-independent analysis are very consistent with the constraints from using different parameterizations of the equation of state of dark energy, namely the flat ΛCDM cosmology, the Chevallier-Polarski-Linder model, and the Phenomenologically Emergent Dark Energy (PEDE) model. This implies that the distance moduli constructed from the JLA data are mostly independent of the cosmological models. We also studied that the possibility the light-curve parameters evolve with redshift and our results show consistency with no evolution. The reconstructed expansion history of the universe and dark energy properties also seem to be in good agreement with the expectations of the standard ΛCDM model. However, our results also indicate that the data still allow for considerable flexibility in the expansion history of the universe. This work is published in ApJ.

• Journal of the Korean Mathematical Society
• /
• v.39 no.4
• /
• pp.593-609
• /
• 2002

The order of speciality of an ample invertible Sheaf L on a curve is the least integer m so that $L^{ m}$ is nonspecial. There is a reasonable upper bound of the order of speciality for a simple invertible sheaf in terms of its degree and projective dimension. We study the case where it reaches the upper bound. Moreover we for mulate Castelnuovo's genus bound involving the order of speciality.ality.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2005.05a
• /
• pp.431-434
• /
• 2005

근원데이터나, 이원데이터를 이용한 문제를 해결하기 위해서는 많은 경우에 완전 해를 갖는 문제로 변형시키기 위해 정규화할 필요성이 있다. 본 논문에서는 이러한 정규화 인수를 찾는 문제를 기존의 GCV, L-Curve, 그리고 이원데이터를 RBF 신경회로망에 적용시킨 커널 학습법에 대한 각각의 성능을 비교실험을 통해 고찰한다. 이때 커널을 이용한 학습법의 성능을 향상하기 위해, 전체학습과 성능의 제한적 비례관계라는 설정아래, 각각의 학습에 따라 능동적으로 변화하는 동적모멘텀의 도입을 제안한다. 끝으로 제안된 동적모멘텀이 분류문제의 표준인 Iris 데이터, Singular 시스템의 대표적 모델인 가우시안 데이터, 그리고 마지막으로 1차원 이미지 복구문제인 Shaw데이터를 이용한 각각의 실험에서 분류문제와 회계문제 양쪽 모두에 있어 기존의 GCV, L-Curve와 동등하거나 우수한 성능이 있음을 보인다.