• Journal of KIISE
• /
• v.42 no.2
• /
• pp.213-219
• /
• 2015

Simulation is used these days to verify the hypothesis or the new technology. In particular, National Defense Modeling & Simulation (M&S) is used to predict wartime situation and conduct the military training. National Defense M&S can be divided into three parts, live simulation, virtual simulation, and constructive simulation. Live simulation is based on the real environment, which allows more realistic sumulation; however, it has decreased budget efficiency, but reduced depictions of reality. In contrast, virtual and constructive simulations which are based on the virtual environment, have increased budget efficiency, but reduced depictions of reality. Thus, if the three parts of the M&S are combined to make the L-V-C combined environment, the disadvantages of each simulation can be complemented to increases the quality of the simulation. In this paper, a method of interworking heterogeneous simulation middeware for L-V-C combined environment is proposed, and the test results of interworking between Data Distribution Service (DDS) and High Level Architecture (HLA) are shown.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.10 no.6
• /
• pp.345-352
• /
• 2015

Recently, by developing many training systems in battle field, the demand for interconnecting and internetworking between Live, Virtual, Constructive training systems has been increased to support efficient data distribution and system control. But, there are lots of problems for them to interwork, because the existing researches only support L-L, V-V, C-C Interoperability. Therefore, we propose L-V-C gateway to provide interoperable simulation environment based on HLA and DDS between them. First, we illustrate FOM Management that parses RPR-FOM XML file to acquire Data information to be shared between them, and generates common data structure and source code used for L-V-C Gateway. L-V-C Gateway created from FOM Management supports Data Conversion and Quality of Service between HLA and DDS. HLA Federate and DDS Domainparticipant in L-V-C Gateway play a role of logical communication channel and relay data from HLA Federation to DDS Domain and vice versa.

• Journal of KIISE
• /
• v.42 no.5
• /
• pp.621-628
• /
• 2015

The rapid growth of network technology makes the high-tech weapon. Thus, in the modern war, the ability to immediately use of the high-tech weapon is important. To realize this ability, continuous trainning is necessary but, this trainning spends many money. To improve the budget efficiency, Modeling and Simulation(M&S) are used. However, they seriously decrease the reality. Recently, the system which can support the combination of Live with Virtual simulation is on the rise. The typical example is L-V-C Environment and many kind of middleware which can support the L-V-C Envrionment are already proposed. Previous middleware can support the interoperability between different simulations but, it cannot completely interoperate three(Live, Virtual, Constructive) simulation environments. In this paper, to solve this problem, we propose the scheme which is combination between different middlewares. And we conduct the API mapping between HLA and DDS which are typical middleware and verify the scheme.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2008.04a
• /
• pp.162-163
• /
• 2008

• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 2003.10a
• /
• pp.143.3-144
• /
• 2003

A Korean isolate of Pepper mild mottle virus (PMMoV-Kr) was isolated from a diseased pepper crop in Chunchon, Korea. The isolate was biologically purified on Nicoticaa tabacum cv. Xanthi-nc by successive single local transfer steps, and propagated on N. tabacum cv. Samsun. PMMoV-Kr could systemically infect on N. glauca, N. benthmiana, N. occidentalis and Lycopersicon esculentum, which is typical of known isolates of PMMoV. PMMoV-Kr belongs to the pathotype P1,2 based on pepper-tobamoviral indicator experiments; Capsicn chinone harboring L3 gene revealed resistant (necrotic local lesion on inoculated leaf, HR) whereas L+, L1 and L2 pepper plants expressed susceptible reactions of mosaic systemic symptoms for the isolate. To confirm the pathology and delineate symptom determinant of the isolate, full-length cDNAs of PMMoV-Kr were amplified by RT-PCR with a primer set corresponding to the 5'- and 3'-ends of PMMoV. The RT-PCR molecules amplified from genome RNA of the isolate was cloned into the pUC18 vector. Full-length cDNA clones constructed under the control of the T7 RNA promoter could be successfully transcribed to produce in vitro transcript RNA. Infectivity of the capped transcripts and its progeny virus was verified by Western blot and RT-PCR analyses.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.11
• /
• pp.1175-1179
• /
• 1998

The aerobic reaction of 2-(acetylpyridine)-S-methyldithiocarbazate (acpy-mdtcH) and 2-(acetylpyridine)-N-phenylthiosemicarbazate(acpy-phTscH) with manganese(Ⅱ) acetate affords Mn(acpy-mdtc)2 and Mn(acpyphTsc)2, respectively. The spectroscopic data and X-ray structure of Mn(acpy-mdtc)2 are reported. Crystal data for Mn(acpy-mdtc)2; C18H20N6S4Mn, mol wt 503.58, monoclinic crystal system(P21/c) a=12.240(5) Å, b= 10.918(l) Å, c=17.651(3) Å, β=105.93(2), and V=2268(l) Å3, Z=4, 5071 data collected with 0°< 2θ < 52.64°, 2995 data with I > 3σ(I), R= 0.046, Rw= 0.065. The ligands act as tridentate NNS donors. The two Mn-S distances are not equal, and respectively 2.512(2) Å and 2.541(2) Å. The average Mn-N (azomethine) length, 2.242(5) Å, is slightly shorter than the average Mn-N (pyridyl) length, 2.262(5) Å. The coordination environment about MN(Ⅱ) center deviates considerably from octahedral geometry. The manganese(Ⅱ)-manganese(Ⅰ) and manganese(Ⅰ)-manganese(0) reduction potentials of Mn(acpy-mdtc)2 are ∼-l.71 and ∼-l.98 V while those of Mn(acpy-phTsc)2 are ∼-l.87 and ∼-2.11 V vs. Ag/Ag+ in dimethyl sulfoxide, respectively.

• Korean Chemical Engineering Research
• /
• v.46 no.4
• /
• pp.681-685
• /
• 2008

Chiral separation of racemic mandelic acid was achieved on a Kromasil KR100-5CHI-TBB column. Some chromatographic parameters (resolution, number of theoretical plates, capacity factor) are calculated under different separation conditions such as changes of mobile phase compositions (hexane/t-BME = 85/15 - 10/90) as well as formic acid concentrations for adjusting pH (0.1, 0.5, 1.0 v/v%). Flow rate versus number of theoretical plates was compared to evaluate column efficiency. To determine the adsorption isotherms, PIM (Pulse Input Method) was carried out. At the concentrations of racemic mandelic acid between 0.1 and 0.3 mg/ml, L- and D-mandelic acids have the same retention times of 8.8 and 9.4 min respectively. Mandelic acid isotherms show a linear form under the concentrations of 0.3 mg/ml with eluent (hexane/t-BME = 75/25). As the concentrations of mandelic acids increase, nonlinear Langmuir isotherms were observed as $C_{S,L}=3.358C_{M,L}/(1+0.0897C_{M,L})$ for L-mandelic acid and, $C_{S,D}=3.692C_{M,D}/(1+0.1457C_{M,D})$ for D-mandelic acid.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.10a
• /
• pp.389-394
• /
• 2005

In this study we carried out to evaluate the salinity concentration and volumetric water content of unsaturated soil column using frequency domain Reflectometry with vector network analyzer (FDR-V) measurement system. All of experiments were considered to the effect of temperature which ranges from l0$^{\circ}C$ to 50$^{\circ}C$ increasing the interval of l0$^{\circ}C$ controlled by the constant temperature container. From the results the responses of complex dielectric constant which consist of the real part and imaginary parts have the effect of volumetric water content and concentration of salinity at 1GHz. Use of derived equations (1) and (2) can be calculated the physical parameters such as volumetric water content and salinity concentration of unsaturated media by the responses of complex dielectric constant.

• Journal of Korean Society on Water Environment
• /
• v.30 no.3
• /
• pp.261-268
• /
• 2014

Four clays (both natural and commercial types) mainly used in Korea were tested for removal efficiency of Microcystis spp. and ecotoxicity on Daphnia magna and Vibrio fischeri. Four clays (clay A~D) were composed of 91.9~100% of sand (0.02~0.2 mm in particle size). Clay D consisted of lager particles than other clays. Major elements of the four clays were $SiO_2$ (45.3~62.8%), $Al_2O_3$ (18.5~29.7%) and $Fe_2O_3$ (5.4~7.9%). They contained kaolinite (clay mineral), quartz, muscovite, and so on. Clay C and D contained montmorillonite, one of the clay minerals improving clay-cell aggregation. For clay A, B and C, removal efficiency of Microcystis spp. was over 60% at 2 g/L. It reached about 100% at over 5 g/L. For clay D, it was over 60% and 95~100% at 5 g/L and 20 g/L respectively. After adding clays, pH decreased. The greatest drop of pH appeared at clay C. Except for addition of 100 g/L clay C, ecotoxicity on D. magna and V. fischeri didn't appeared at all dose of clays.

• Journal of Advanced Marine Engineering and Technology
• /
• v.24 no.6
• /
• pp.70-77
• /
• 2000

In this paper, the effect of solution and age heat treatment to the corrosion behavior for the Ti-6Al-4V alloy were studied by cyclic polarization methods. Ti-6Al-4V was solution heat treated at $1,066^{\circ}C$ and $966^{\circ}C$ for 5 hours, and followed by age heat treated at $650^{\circ}C$, $600^{\circ}C$ and $550^{\circ}C$ with 1, 2, 4, 8 and 16 hours under vacuum environment. Test solution was 3.5% NaCl with temperature $25^{\circ}C$. The obtained results were as follows: 1. Base metal was exhibited higher electrical charge than that of solution and aged material. With decrease of solution-treatment temperature from 1066 to $966^{\circ}C$, the electrical charge was increased due to softening of micro structure. 2. The corrosion resistance of specimen that solution treated at $966^{\circ}C$ for 5 hours and age heat treated at 650, 660 and $550^{\circ}C$ were increased with increase of aging time to 4, 8 and 16 hours respectively, and then decreased. 3. In case of 316L stainless steel, measured charge and corrosion potential was 0.0627 coulomb and -614 mV respectively. Corrosion resistance of Ti-6Al-4V was higher than that of 316L.