• The Journal of Korean Academy of Prosthodontics
• /
• v.18 no.1
• /
• pp.15-35
• /
• 1980

The purpose of this study was to investigate stresses in the various components of fixed partial dentures restoring the posterior teeth of the lower jaw, and to measure quantitatively the effects of certain modifications in structural design on the stresses in the restorations using two-dimensional photoelasticity. Two-dimensional photoelastic methods were used in this study. Several models of fixed partial dentures were constructed. Shoulder less margins and anatomic occlusal reduction were incorporated in Model 1. Rounded shoulders and flat occlusal reduction were incorporated in Model 2, while Model 3 was a cantilever fixed partial denture. Other similar fixed partial dentures were constructed with V and U notches deliverately included in the region of the fixed joints for comparative reasons. The birefringent materials used in this study were PSM-1 and PSM-5 in standard sheets. PSM-1 was used for constructing the substructure, and PSM-5 was used in making the components of the fixed partial dentures. The two materials were used in the construction of composite photoelastic models. Improved artificial stone was used to represent dental cement in luting the composite photoelastic models. Static loading procedures were used at preplanned sites to represent occlusal loads in the mouth. 35 mm color and B/W film were used to record isochromatics in accordance with photoelastic procedures. Data reduction was performed using the grid method, which helped in, the mathematical integration procedure (Shear difference method) to separate the principal stresses. The results were as follows. 1. Fixed partial dentures do not function in bending as a symmetrical beam. Alternate areas of tension and compression were demonstrated when multiple contact loading was used. 2. The weakest part in posterior fixed partial dentures is the fixed joint. 3. (1) Models I and modified Model I were loaded on the pontic using a 50 pound vertical static load. The shear stress near the posterior fixed joint in Model 1 (U notches) was+129.4 p.s.i., and at the same fixed joint in modified Model 1 (V notches) was+239.4 p.s.i. The concentration of stress in fixed joint was reduced by 50% when U notches replaced the V notches. (2) Modified Model 2 was loaded using a multiple contact loader at a total load of 125 pounds. The difference between the principal stresses (${\sigma}_1-{\sigma}_2$), shear stress, at the V notches was+600 p.s.i., and at the U notches was+3l7 p.s.i. The shear stress was reduced by 50% when U notches replaced the V notches. V-grooves at the fixed joints should be avoided, and should be replaced by regular shaped U-grooves. 4. Cantilever fixed partial dentures had much higher stresses at the fixed joint than fixed partial dentures that were attached at both ends.

• Applied Biological Chemistry
• /
• v.47 no.2
• /
• pp.170-175
• /
• 2004

In this paper we studied about Bacillus sp. TBM40-3 producing biosurfactants. The strains were isolated from Taeback Mountain soil and identified as Bacillus sp. by l6S rDNA nucleotides sequence analysis. The TBM40-3 was gram-positive and rod-shaped as observed by field emission scanning microscopy. After the cultivation TBM40-3 in LB broth for 90 h and the surface tension of supernatant was decreased to 29 mN/m. Emulsification activity and stability of crude biosurfactant was measured by using water-immiscible hydrocarbons and oil as substrate. Maximum emulsification activity and stability was obtained from soybean oil. Also, we confirmed that the TBM40-3 producing biosurfactant had an effect on crude oil while showing a superior effect as compared to chemically synthesized surfactants (SDS, Span85, Tween40, Triton X-100). As a result, the Bacillus sp. TBM40-3 producing biosurfactant had potent properties as an emulsifying agent and an emulsion stabilizing agent.

• Restorative Dentistry and Endodontics
• /
• v.42 no.1
• /
• pp.9-18
• /
• 2017

Objectives: This study evaluated color differences (${\Delta}Es$) and translucency parameter changes (${\Delta}TPs$) of various computer-aided design/computer-aided manufacturing (CAD/CAM) blocks after immersion in coffee. Materials and Methods: Eight CAD/CAM blocks and four restorative composite resins were evaluated. The CIE $L^{\ast}a^{\ast}b^{\ast}$ values of 2.0 mm thick disk-shaped specimens were measured using the spectrophotometer on white and black backgrounds (n = 6). The ${\Delta}Es$ and ${\Delta}TPs$ of one day, one week, and one month immersion in coffee or water were calculated. The values of each material were analyzed by two-way ANOVA and Tukey's multiple comparisons (${\alpha}=0.05$). The ${\Delta}Es$ after prophylaxis paste polishing of 1 month coffee immersion specimens, water sorption and solubility were also evaluated. Results: After one month in coffee, ${\Delta}Es$ of CAD/CAM composite resin blocks and restorative composites ranged from 1.6 to 3.7 and from 2.1 to 7.9, respectively, and ${\Delta}TPs$ decreased. The ANOVA of ${\Delta}Es$ and ${\Delta}TPs$ revealed significant differences in two main factors, immersion periods and media, and their interaction except for ${\Delta}Es$ of TEL (Telio CAD, Ivoclar Vivadent). The ${\Delta}Es$ significantly decreased after prophylaxis polishing except GRA (Gradia Block, GC). There was no significant correlation between ${\Delta}Es$ and water sorption or solubility in water. Conclusions: The ${\Delta}Es$ of CAD/CAM blocks after immersion in coffee varied among products and were comparable to those of restorative composite resins. The discoloration of CAD/CAM composite resin blocks could be effectively removed with prophylaxis paste polishing, while that of some restorative composites could not be removed.

• Korean Journal of Breeding Science
• /
• v.40 no.2
• /
• pp.173-177
• /
• 2008

A new peanut variety "Pungsan" (Arachis hypogaea ssp. hypogaea L.) was developed at the Yeongnam Agricultural Research Institute, NICS, in Milyang in 2007. It was derived from a cross between a short stem cultivar "Satonoka" and a high-yielding local cultivar "Yecheon". "Pungsan" is the Virginia plant type. It has 18 branches per plant and 40 cm of main stem height. Each pod with long-ellipse shaped large kernel has two grains with light-brown testa and 100 seed weight was 95g in the regional yield trials (RYT). "Pungsan" showed more resistant to web blotch compared with check variety. In the regional yield trials "Pungsan" was outyielded in grain yield to the check variety by 16% with 4.45 MT/ha for grain.

• Korean Journal of Breeding Science
• /
• v.40 no.1
• /
• pp.63-67
• /
• 2008

A new peanut cultivar "Jopyeong" (Arachis hypogaea ssp. hypogaea L.) was developed at the Yeongnam Agricultural Research Institute, NICS, in Milyang in 2006. It was developed from the cross between the very short stem cultivar "CUP brittle" and the high-yielding cultivar "Daekwang". "Jopyeong" which is Virginia plant type has 23 branch number per plant with early maturing and ellipse-shaped large kernel. Each pod has two grains with brown testa and 100 seed weight was 87g in the regional yield trials (RYT). This variety also showed more resistant to late leaf spots compared with check one. Especially it has resistance to lodging owing to short stem and erect plant type. In the regional yield trials "Jopyeong" was out-yielded than check variety by 11% with 8.37 ton/ha for fresh pod and by 4% with 3.95 ton/ha for grain.

• Korean Journal of Breeding Science
• /
• v.40 no.2
• /
• pp.178-183
• /
• 2008

A new peanut variety "Seonan" (Arachis hypogaea ssp. hypogaea L.) was developed at the Yeongnam Agricultural Research Institute, NICS, in Milyang in 2007. It was developed from the cross between the erect short stem cultivar "SP9128" and the high-yielding cultivar "Daekwang". "Seanan" which is Virginia plant type has 18 branch number per plant with early maturing and long-ellipse shaped large kernel. Each pod has two grains with brown testa and 100 seed weight was 87 g in the regional yield trials (RYT). Especially this variety has resistance to lodging owing to short stem. The free sugar and tannin content of fresh peanut are 3.7% and 0.48%, respectively, similar to check variety. In the regional yield trials "Seonan" was outyielded than check variety by 14% with 8.59 MT/ha for fresh pod and by 7% with 3.75 MT/ha for grain.

• Korean Journal of Breeding Science
• /
• v.40 no.2
• /
• pp.168-172
• /
• 2008

A new peanut variety "Charmpyeong" (Arachis hypogaea ssp. hypogaea L.) was developed at the Yeongnam Agricultural Research Institute, NICS, in Milyang in 2007. It was developed from the cross between the high-yielding cultivar "Shindaekwang" and the very short stem cultivar "ICGV94216". This Virginia plant typed "Charmpyeong" has 33 cm stem height and 18 branch number Each pod with ellipse-shaped large kernel has two grains with brown testa and 100 seed weight was 88 g in the regional yield trials (RYT). This variety also showed more resistant to web blotch compared with check one. Especially it has resistance to lodging until harvesting owing to short stem. In the regional yield trials "Charmpyeong" was outyielded than check variety by 13% with 4.35 MT/ha for grain.

• Korean Journal of Breeding Science
• /
• v.40 no.1
• /
• pp.58-62
• /
• 2008

A new vegetable peanut cultivar "Charmwon" (Arachis hypogaea ssp. fastigiata.L.) was developed at the Yeongnam Agricultural Research Institute, NICS, in Milyang 2006. It was developed from the cross between the disease resistant cultivar "HYQ(CG)S-10" and the high-yielding cultivar "Sinkwang". "Charmwon" which has been classified as Shinpung plant type is less branch number with early flowering and ellipse-shaped large kernel. Each pod which showed very shallow constriction had two grains with red testa and 100 seed weight was 90g in the regional yield trials (RYT). This variety also showed higher free sugar and protein contents in seed quality, and had more resistant to early and late leaf spot diseases compared with check one. In the regional yield trials "Charmwon" was out-yielded than check variety by 18% with 8.93 ton/ha for fresh pod and by 4% with 3.95 ton/ha for grain.

• Korean Journal of Breeding Science
• /
• v.49 no.3
• /
• pp.224-229
• /
• 2017

A new peanut variety 'Daan'(Arachis hypogaea ssp. hypogaea L.) was developed at the Department of Southern Area Crop Science, National Institute of Crop Science (NICS) in Milyang 2014. This was developed from the cross between 'Iksan 31' with Virginia typed short stem and 'Dakwang' with Shinpung-typed larger grain. 'Daan' which is a Shinpung plant type had 13 branches per plant and its length of main stem was 44cm. Each pod has two grains with brown testa and long ellipse-shaped large kernel. Its yield components showed 34 pods per plant, 127 g of 100-seed-weight and 75% of pod shelling ratio in the regional yield trials (RYT). Seed quality showed 47.8% of crude oil and 28.3% of protein content. This variety showed resistant to early leaf spot and had more resistant to late leaf spot, stem rot and lodging, compared to reference variety. In the regional yield trials for 3 years 'Daan' was more productive than reference variety by 16% with 5.00 MT/ha for grain production.

• Korean Journal of Ichthyology
• /
• v.34 no.1
• /
• pp.57-63
• /
• 2022

On April. 2016, the anadromous icy goby caught at Shinbong-cheon, Tongyeong shi, Gyeongsangnam-do transported to the laboratory of Korea Institute of Ocean Science and Technology (KIOST) and observed spawning behavior and egg development and larvae. In aquarium, males make the nest under stone and waiting female entering. Fertilized eggs attached under the stone in the nest. Male protected the fertilized eggs until hatching. The size of the club-shaped eggs were 3.2~3.4 mm in the major axis and 0.6~0.8 mm in minor axis (n=10). The eyed eggs were hatched after 168 hrs in a range of water temperatures (18.0~20.0℃). The total lengths of newly hatched larvae were 4.1~4.4 mm (n=5) and these larvae had 32~33 (12~13+20) myotomes and transparent oval yolk. Three days after hatching, the pre-larva (4.9 mm in total length) has opening mouth and rectum. Post-larva with 5.2 mm total length have melanophore on air bladder, rectum, base of membranous caudal fin and 9~10 melanophores ventral row on the tail.