• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1996년도 춘계학술대회논문집
• /
• pp.16-22
• /
• 1996

Two kinds of blank shapes, optimum and square, are adopted to investigate formbility. Optimum blank shape is determined to construct an L-shape cup with uniform height and without flange part. For this purpose , rigid-plastic FEM analysis is applied with backward tracing technique. Maximum cup detph and strain distribution are measured experimetally for the products of the two kinds of blank shapes, which are optimum and square.It is confirmed that deeper cup without severe thickness reduction can be obtained fro the optimum shape.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1660-1663
• /
• 2003

This paper present the characteristics of radiation pattern of microstrip slot antenna on the ground plane fed by microstrip line. It is proposed for resonance frequency at 10 GHz. We will analysis two shape of slot antenna; double L-shape slot antenna and U-shape slot antenna. In this case, we will compare far-field radiation pattern of two shape slot antenna. Far-field radiation pattern of double L-shape slot antenna is bi-directional nevertheless U-shape slot antenna is uni-directional. The microstrip slot antenna is propose to analyze far-field radiation pattern for use in the wireless communication systems

• 한국농공학회지
• /
• 제43권3호
• /
• pp.85-93
• /
• 2001

In this study, a computer program considering shape imperfections of arch under dynamic loading was developed. The shape imperfection of arch was assumed as higher degree polynomial expressed as $\omega$$_{i}$ = $\omega$$_{o}$ (1-(2$\chi$/L)$^{m}$ )$^n$and sinusoidal curve such as $\omega$$_{i}$ = $\omega$$_{o}$ sin(η$\pi$$\chi$/L). In finite element formulation, the material nonlinear behavior was assumed the elasto-viscoplastic model highly corresponding to the real behavior of the material and the geometrically nonlinear behavior was modeled using Lagrangian description of motion. Also, the behavior of steel was modeled by applying yield criteria of Von Mises. The developed program was applied to the analysis of the dynamic behavior for the clamped beam subjected to the concentrated load at midspan and the results were compared with those from other research to investigate accuracy of the presented finite element program. In numerical examples, the shape imperfections of L/500, L/1,000 and L/2,000 were considered and the modes of shape imperfections of the symmetric and antisymmetric were adopted. The effects of the shape imperfections on the dynamic behavior of arch were conspicuous and results of analysis indicate that the reasonable values of arch rise to arch span ratio ranged between 0.1 and 0.3.

• Journal of electromagnetic engineering and science
• /
• 제17권3호
• /
• pp.126-132
• /
• 2017

In this study, we designed, measured, and analyzed a rearranged L-shape magnetic resonance coupling wireless power transfer (MR-WPT) system for practical applications with laptops. The typical four resonator MR-WPT (Tx part: source loop and Tx coil; Rx part: Rx coil and load loop) is difficult to apply to small-sized stationary and mobile applications, such as laptop computers, tablet-PCs, and smartphones, owing to the large volume of the Rx part and the spatial restrictions of the Tx and Rx coils. Therefore, an L-shape structure, which is the orthogonal arrangement of the Tx and Rx parts, is proposed for indoor environment applications, such as at an L-shaped wall or desk. The relatively large Tx part and Rx coil can be installed in the wall and the desk, respectively, while the load loop is embedded in the small stationary or mobile devices. The transfer efficiency (TE) of the proposed system was measured according to the transfer distance (TD) and the misaligned locations of the load loop. In addition, we measured the TE in the active/non-active state and monitor-open/closed state of the laptop computer. The overall highest TE of the L-shape MR-WPT was 61.43% at 45 cm TD, and the TE decreased to 27.9% in the active and monitor-open state of the laptop computer. The conductive ground plane has a much higher impact on the performance when compared to the impact of the active/non-active states. We verified the characteristics and practical benefits of the proposed L-shape MR-WPT compared to the typical MR-WPT for applications to L-shaped corners.

• 한국공간구조학회논문집
• /
• 제11권3호
• /
• pp.125-135
• /
• 2011

본 연구에서는 morphogenesis 기법의 L-system 모델을 사용하여 대공간 구조물의 형태 생성 방안을 제공하고자 한다. 이와 같은 L-system 모델은 일반적으로 식물의 성장 과정을 시각화하기 위해 적용되어 왔으나 본 연구는 이를 건축 분야에 적용하기 위한 프로세스가 제안된다. L-system 모텔은 크게 문자열 생성 단계와 문자열 분석 단계로 구성되어 있다. 문자열 생성 단계에서는 초기문자열로부터 최종 문자열을 생생하며, 문자열을 생성하기 위해서는 alphabet, axiom 및 rule에 대한 정의가 필요하다. 또한 문자열 해석 단계에서는 문자열의 의미 부여에 따라 다양하게 해석될 수 있다. 특히 다양한 적용 예제를 통해 대공간 구조물의 형태 생성 모델을 구현한다.

• 소성∙가공
• /
• 제5권4호
• /
• pp.281-287
• /
• 1996

Two kinds of blank shapes optimum and square are adopted to investigate formability. Optimum blank shape is determined to construct an L-shape cup with uniform height and without flange part. For this purpose rigid-plastic FEM analysis is applied with backward tracing technique. Maximum cup depth and strain distribution are measured experimentally for the products of the two kinds of blank shapes which are optimum and square. it is confirmed that deeper cup without severe thickness reduction can be obtained from the optimum shape.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 정기총회 및 추계학술대회 논문집 학회본부
• /
• pp.41-43
• /
• 1993

This paper is proposed a method that optimizes teeth shape of Linear induction motor for high efficiency and slot shape for static end effect minimization in linear induction motor. As a result, unbalance current of each phase in minimized.

• 한국자원식물학회지
• /
• 제12권2호
• /
• pp.133-138
• /
• 1999

당근(Daucus carota L. cv. Hongshim)의 접합자배와 체세포배의 경정부의 구조는 주사전자현미경과 종단면 관찰을 통하여 이루어졌다. 접합자배의 경정부는 도립된 보우트형이고, 2ㆍ3ㆍ4자엽 체세포배의 경정부는 각각 도립된 보우트형, 피라미드형 및 볼록한 다이아몬드형으로 나타났다. 접합자배의 경정부는 다소 작은 세포들로 구성되어 있고, 초층과 내체의 구별이 된다. 체세포배의 경정부는 다소 큰 세포들이 불규칙하게 배열되어 있다.

• 대한기계학회논문집
• /
• 제5권3호
• /
• pp.199-206
• /
• 1981

This paper presents a method of calculation of the stresses, the strains and the deflections due to welding in L shape and in T shape. Using step by step method of plasticity and establishing the equilibrium conditions in section, we calculated thermal stresses and strains during welding and in the final step of calculation we got the residual stresses, strains and the deflections due to welding. Also we measured the stresses and the strains with hole-drilling method and compared the results with the method of calculation presented in this paper. Because of its symmetry of section, the deflection due to welding in T shape is generally much less than that in L shape. The residual stresses are tensile in welded joints and HAZ, and compressive in base metal as butt welding of plates, but the compressive stresses in base metal decrease repidly as the points are away from welded joint except horizontal plates of T shape. The theoretical method of calculaiton presented in this paper coincides faily well with the experiment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 A
• /
• pp.241-243
• /
• 1998

This paper describes a new method for the faster shape optimization of the electromagnetic devices. In a conventional iterative method of shape design optimization using design sensitivity based on a finite element method, meshes for a new shape of the model are generated and a discretized system equation is solved using the meshes in each iteration. They cause much design time. To save this time, a polynomial approximation of the finite element solution with respect to the geometric design parameters using Taylor expansion is constructed. This approximate state variable expressed explicitly in terms of design parameters is employed in a gradient-based optimization method. The proposed method is applied to the shape design of quadrupole magnet.