• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.354-358
• /
• 2000

T-모양의 급전구조를 갖는 마이크로스트립 슬롯 안테나는 정합을 쉽게 이룰 수 있고, 대역 폭이 기존의 슬롯을 가로지르는 급전구조에 비하여 넓었다. 본 논문에서는 역 L-형 마이크로스트립 급전구조를 제안하여 FDTD(Finite Difference Time Domain)법으로 해석하여 안테나를 최적화 설계하였다. 슬롯 폭이 16 mm일 때, 전압 정재파비가 2.0 이하인 조건에서 대역폭은 2.3 GHz를 중심으로 약 48 % 정도의 광대역 특성을 얻었다. 제안된 급전구조는 기존의 슬롯 가로지르는 급전구조의 복사 저항보다 매우 낮았다. 또한 역 L-형 급전구조의 대역폭 특성을 기존의 급전구조의 슬롯릇 안테나들과 비교하였다.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.153-156
• /
• 1998

구형도파관의 넓은 면에 축방향 슬롯을 파고 또 각각의 슬롯을 축방향으로 배열하였 때의 원거리 방사패턴을 구하는 과정을 보였으며 측정된 결과와 계산결과를 비교하였다. 방사전자계는 슬롯의 표면에 유기되는 등가의 자기전류로부터 계산할 수 있으며 임의의 개수를 가지는 배열안테나의 경우에는 각각의 슬롯이 자기 어드미턴스와 상호결합에 의한 영향을 받기 때문에 원하는 방사패턴을 얻기 위해서는 상호 어드미턴스를 고려하여 슬롯의 길이와 오프셋을 고려하여야 한다. 슬롯에서의 전계분포 해석은 모멘트법(method of moment)을 사용하여 해석하였다. 본 연구에서는 직선편파특성을 가지는 슬롯 배열 안테나의 설계를 위하여 슬롯의 자기 및 상호 어드미턴스를 구하고, 반복적인 수치해석 과정을 통하여 입력임피던스의 최적화 방법에 대하여 논하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.6
• /
• pp.882-889
• /
• 2001

In this paper, the characteristics of u-slot antennas are computed by changing the feed structure, and compared with the measured results. The impedance bandwidths of 13 %(255.1 MHz) and 30.7 %(602.1 MHz) are obtained for probe feed and L-strip feed, respectively. It is known that the designed L-strip feed can be used for increasing the bandwidth of u-slot antennas. In addition, it is shown that the designed L-strip feed u-slot antenna can be used for domestic PCS and IMT-2000 dual band applications.

• Journal of Advanced Navigation Technology
• /
• v.18 no.4
• /
• pp.376-380
• /
• 2014

In the present study, oblique L-shaped monopole slot antenna with broadband characteristic is newly proposed. For bandwidth enhancement as well as size reduction, L-shaped slot with two open-terminations on the ground edge is used. The lower part of L-shaped slot comprises oblique form for bandwidth enhancement in low frequency band, whereas its higher part comprise tapered form for its enhancement in high frequency band. The short-circuit terminated microstrip line which is generally known to be more useful for bandwidth enhancement than open-circuit termination is used. The measured impedance bandwidth($S_{11}{\leq}-10dB$) and gain of the fabricated antenna have been observed to be 4.72 GHz (2.28~7 GHz) and more than 3dBi over the passband respectively.

• Journal of the Korea Society of Computer and Information
• /
• v.5 no.4
• /
• pp.76-81
• /
• 2000

In this Paper, an improved L-Expressnet Protocol is proposed by supplementing slot-extension function. This protocol is Proposed to complement the shortcomings of the conventional protocol which is used for the medium access control (MAC) in LAN. We analyzed the protocol in channel utilization viewpoint and compared the result with that of the conventional L-Expressnet medium access control (MAC) protocol. From this result. we showed that the channel utilization of the improved L-Expressnet protocol added slot-extension function is superior to that of the conventional Protocol.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.7
• /
• pp.1221-1228
• /
• 2016

In this paper, we propose a modified rhombus slot UWB(Ultra Wide Band) antenna with fork-shaped feeding structure. The proposed antenna is modified rhombus slot structure and fork-shaped feeding structure to get ultra-wideband characteristics for UWB communication. Modified rhombus slot structure consists of slot shaped which eliminated upper and lower part of the basic rhombus slot. The antenna is designed on an FR-4 substrate of which the dielectric constant is 4.4, and its overall size is $34mm(W_1){\times}34mm(L_1){\times}1mm(t)$, and its slot antenna size is $30mm(W_2){\times}16.75mm(L_3+L_4)$. After carrying out the simulation of each parameters, optimized values are obtained. From the fabricated and measured results, return loss of the proposed antenna satisfied Return Loss -10dB in 3.1 ~ 10.6 GHz. And measured results of gain and radiation patterns characteristics displayed for operating bands.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.4
• /
• pp.599-604
• /
• 2021

In the information age, internet was developed from the wired access to the wireless Internet access. When a surge in demand for wireless Internet access, efficiency and performance of 2.4 and 5GHz band which leads to saturation of the communication was significantly fall. In this paper, we studied the design and fabrication of slot patch antenna to be used in wireless communication systems operating at around 10GHz band. To obtain optimal antenna parameters such as patch size, inter patch space, sL, sW, feed L, feed w, slot patch antenna was simulated by HFSS(High Frequency Structure Simulator). From these parameters, slot and patch antenna is fabricated using FR-4 substrate of dielectric constant 4.4. The characteristics of fabricated antenna were analyzed by network analyzer. The fabricated slot patch antenna showed a center frequency as 10.23GHz, the minimum return loss as -32dB, and -10dB bandwidth as 420MHz respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.1
• /
• pp.1-7
• /
• 2017

In this paper, a design method for a compact stepped open slot antenna for an operation in the UWB band is studied. The proposed antenna is miniaturized by inserting L-shaped slots on the ground plane of the stepped open slot antenna through the creation of a resonance in the low frequency, and a strip director is appended to the antenna in order to increase the gain in the middle and high frequency regions. The effects of varying the length of the L-shaped slots, the distance between the director and the slot antenna, and the director length on input reflection coefficient and realized gain characteristics of the proposed antenna are analyzed. The optimized antenna with the size of $30mm{\times}30mm$ is fabricated on an FR4 substrate, and the experiment results show that the antenna has a frequency band of 3.02-11.04 GHz for a VSWR < 2, which assures the operation in the UWB band.

• Explosives and Blasting
• /
• v.19 no.3
• /
• pp.105-113
• /
• 2001

채석, 굴착, 가공과 같은 워터젯 응용분야에서 대상재료에 깊은 홈(kerf)을 절단할 수 있는 실험실용 회전식 슬로터(slotter)를 제작하여 암석을 대상으로 워터젯 시스템의 절단효율을 시험하였다. 고압펌프는 유율 7.5 l/min, 압력 379 MPa, 용량 75 kW급의 JETPAC을 주로 사용하였고, 암석시료는 화강석인 제천석, 거창석을 사용하였다. 시험과정에서는 물과 연마재 투입에 의한 절단 및 진동식 슬로터에 의한 슬롯절단 기초시험을 먼저 수행하고, 그 결과를 토대로 회전식 슬로터에 의한 절단시험을 실시하였다. 순수한 물에 의한 시험의 결과 고압수류의 토출압력은 절단심도에 정비례하였고, 노즐의 이송속도는 이차함수 형태의 반비례 관계를 보였다. 연마재 투입시험에서는 순수한 물에 의한 경우에 비해 연마재로 인한 충격력의 증가로 절단심도가 크게 증가하였는데, 유사한 조건하에서 3~5배 이상의 절단심도의 증가를 보였다. 진동식 슬로터에 의한 슬롯절삭에서는 생성된 슬롯의 내벽면이 바닥으로 갈수록 좁아짐으로써 넓은 폭의 슬롯형성은 가능하나 절삭심도가 제한되었다. 회전식 슬로터에 의한 시험에서 생성된 슬롯들은 평균 22 mm의 폭으로 내벽면이 바닥까지 서로 평행하여 깊은 심도까지 비트진입이 가능하였다. 절단율은 16~32 mm/sec의 속도범위에서 $40~160{\;}\textrm{mm}^2/sec$로 나타났다. 한편, 최대유율 24 l/min의 HUSKY S-200 펌프에 의한 시험결과 JETPAC 펌프에 비해 1.13~3.47 배의 절단심도를 보였다

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.630-632
• /
• 2016

In this paper, we propose a modified rhombus slot UWB(Ultra Wide Band) antenna with fork-shaped feeding structure. The proposed modified rhombus slot structure is eliminated upper and lower part of the basic rhombus slot shape to get ultra-wideband characteristics for UWB communication. Also, feeding structure is used to fork-shaped structure to get ultra-wideband characteristics. The antenna is designed on an FR-4 substrate of which the dielectric constant is 4.4, and its overall size is $34mm(W1){\times}34mm(L1){\times}1mm(t)$, and its slot antenna size is $30mm(W2){\times}16.75mm(L3+L4)$. After the optimized process, the proposed antenna is fabricated and measured. Measured result. fabricated antenna satisfied -10 dB impedance bandwidth in UWB frequency band (3.1 ~ 10.6 GHz ). And measured results of gain and radiation patterns characteristics displayed determined for operating bands.