• The Journal of Advanced Prosthodontics
• /
• v.15 no.3
• /
• pp.114-125
• /
• 2023

PURPOSE. The aim of the study was to evaluate the optical properties of new generation (3Y-TZP) monolithic zirconia (MZ) with different abutment types and resin cement shades. MATERIALS AND METHODS. A1/LT MZ specimens were prepared (10 × 12 × 1 mm, N = 30) and divided into 3 groups according to cement shades as transparent (Tr), yellow (Y) and opaque (O). Abutment specimens were obtained from 4 different materials including zirconia (Group Z), hybrid (Group H), titanium (Group T) and anodized yellow titanium (Group AT). MZ and abutment specimens were then cemented. L^*, a^*, and b^* parameters were obtained from MZ, MZ + abutment, and MZ + abutment + cement. ∆E₀₀₁^* (between MZ and MZ + abutment), ∆E₀₀₂^* (between MZ and MZ + abutment + cement) and ∆E₀₀₃^* (between MZ + abutment and MZ + abutment + cement) values were calculated. Statistical analyses included 2-way ANOVA, Bonferroni, and Paired Sample t-Tests (P < .05). RESULTS. Abutment types and resin cements had significant effect on L^*, a^*, b^*, ∆E₀₀₁^*, ∆E₀₀₂^*, and ∆E₀₀₃^* values (P < .001). Without cementation, whereas zirconia abutment resulted in the least discoloration (∆E₀₀₁^* = 0.68), titanium abutment caused the most discoloration (∆E₀₀₁^* = 4.99). The least ∆E₀₀₂^* = 0.68 value was seen using zirconia abutment after cementation with yellow shaded cement. Opaque shaded cement caused the most color change (∆E₀₀₃^* = 5.24). Cement application increased the L^* values in all groups. CONCLUSION. The least color change with/without cement was observed in crown configurations created with zirconia abutments. Zirconia and hybrid abutments produced significantly lower ∆E₀₀₂^* and ∆E₀₀₃^* values in combination with yellow shaded cement. The usage of opaque shaded cement in titanium/anodized titanium groups may enable the clinically unacceptable ∆E₀₀^* value to reach the acceptable level.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2022.09a
• /
• pp.68-68
• /
• 2022

The pepper mild mottle virus (PMMoV), belonging to the tobamovirus genus, is currently one of the most destructive pathogens in pepper production. Tobamoviruses have been classified in terms of increased pathogenicity as pathotypes P₀, P₁, P_1,2, P_1,2,3 and P_1,2,3,4, based on their ability to infect systemically Capsicum L⁰ , L¹ , L² , L³ and L⁴ resistant plants, respectively. Two hundred eighty pepper germplasms and 5 reference accessions known as resistant L alleles, were analyzed to select the resistance cultivars against PMMoV- P_1,2,3 (CV130614-2) using bioassay and genetic markers. The susceptible accessions showed systemic symptom when inoculated with PMMoV- P_1,2,3. However, accessions including IT223737, were resistant as they developed necrotic local lesions only on inoculated leaves, whereas no symptoms were observed on the upper leaves. Moreover, RT-PCR results for detecting the presence of virus were also negative. Thus, those accessions will be used as a novel source to facilitate introduction the resistant gene into commercial cultivars of pepper.

• Journal of dental hygiene science
• /
• v.22 no.3
• /
• pp.156-163
• /
• 2022

Background: This study attempted to apply resin infiltrant (RI) as a method to maintain the effect of tooth bleaching treatment and compared it with fluoride varnish (FV) or artificial saliva to evaluate the effect. Methods: Sixty healthy lozenge specimens were classified into five groups. Group 1 was the negative control group, and discoloration was induced after artificial saliva treatment of the tooth specimen (G1_S+C). Group 2 was a positive control group, in which pigmentation was induced after bleaching treatment and artificial saliva treatment (G2 _B+S+C). Coloration was induced in group 3 (experimental group 1) after bleaching treatment and artificial saliva treatment, followed by application of fluorine varnish (G3_B+FV+S+C). Coloration was induced in Group 4 (experimental group 2) after applying RI after bleaching treatment and artificial saliva treatment (G4_B+RI+S+C). Pigmentation was induced in group 5 (experimental group 3) after bleaching treatment and artificial saliva treatment, followed by acid treatment (etching) and treatment with RI (G5_B+E+RI+S+C). Coffee and wine were used to induce discoloration. The lightness value (L^*) of the CIE L^*a^*b^* color system was obtained by image analysis. Kruskal-Wallis H analysis was performed for the mean difference in L^* values by group. Results: When coloration was induced with coffee, there was no significant difference in L^* value between artificial saliva (G2 _B+S+C), FV (G3_B+FV+S+C), and RI (G4_B+RI+S+C, G5_B+E+RI+S+C) groups. There was no significant difference in L^* values between the artificial saliva (G2 _B+S+C), FV (G3_B+FV+S+C), and RI (G4_B+RI+S+C, G5_B+E+RI+S+C) groups, even in the case of wine induced coloration. Conclusion: It was confirmed that artificial saliva or RI treatment had similar effects to the FV previously used to maintain the effect of tooth bleaching treatment.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.112-112
• /
• 2022

외래잡초인 애기수영(Rumex acetosella)는 생태계 교란종으로 생물다양성을 감소시키고, 우리나라 목초지에 우점하고 있어 큰 문제를 야기한다. 애기수영의 경우, 살초효과 및 제초활성물질인 chrysophanic acid와 catechd이 밝혀져 있지만, 톨페스큐(Festuca arundinacea)에 대한 살초 효과 연구는 미비하다. 이에 본 연구는 톨페스큐 종자에 대해 애기수영 MeOH 추출물을 처리한 Seed bioassay를 진행해 IC₅₀ 값을 구하고, 톨페스큐에 애기수영 MeOH 추출물을 경엽처리를 진행한 후 생육조사를 진행했다. Seed bioassay의 경우, petri dish 위에 톨페스큐 종자 20개가 치상하고, 애기수영 지상부 추출물과 지하부 추출물을 각각 20,000 mg L^-1, 10,000 mg L^-1, 5,000 mg L^-1, 2,500 mg L^-1 농도로 serial dilution 하여 1mL씩 분주한 뒤, 일주일 뒤에 발아한 종자에 대해 생체중을 조사하고 Prizm 프로그램을 이용해 IC₅₀을 구하였다. 경엽처리의 경우, 톨페스큐 종자 파종4주 뒤에 IC₅₀값이 더 낮았던 지상부 추출물을 100,000 mg L^-1, 50,000 mg L^-1, 25,000 mg L^-1, 12,500 mg L^-1, 6,250 mg L^-1 농도로 serial dilution 한 뒤 5mL씩 일주일 간격으로 3회 경엽처리를 진행하였고, 마지막 처리 일주일 뒤 초장, 근장, 생체중, 건물중을 조사하였다. Seed bioassay 결과, 애기수영 지하부 추출물에 대한 톨페스큐의 IC₅₀값은 3274가 나왔고, 애기수영 지상부 추출물에 대한 톨페스큐의 IC₅₀값은 2728가 나왔다. Seed bioassay 결과를 바탕으로 효과적 이 었던 지상부 추출물을 이용해 톨페스큐 경엽처리를 진행하였다. 애기수영 지상부 추출물 경엽처리 결과, 톨페스큐 초장과 생체중이 추출물 처리량이 높아짐에 따라 낮아졌으며, 100,000 mg L^-1 처리구는 Control과 비교해 유의적으로 감소하였고, 처리량이 높아짐에 따라 근장이 감소했지만, 유의적인 차이는 없었다. 그리고 건물중은 100,000 mg L^-1 처리구가 Control, 12,500 mg L^-1, 6,250 mg L^-1 처리구와 비교해 유의적으로 낮았다.

• Nonlinear Functional Analysis and Applications
• /
• v.26 no.4
• /
• pp.855-868
• /
• 2021

If p(z) is a polynomial of degree n having all its zeros in |z| ≤ k, k ≤ 1, then for 𝜌R ≥ k² and 𝜌 ≤ R, Aziz and Zargar [4] proved that $${\max_{{\mid}z{\mid}=1}}{\mid}p^{\prime}(z){\mid}{\geq}n{\frac{(R+k)^{n-1}}{({\rho}+k)^n}}\{{\max_{{\mid}z{\mid}=1}}{\mid}p(z){\mid}+{\min_{{\mid}z{\mid}=k}}{\mid}p(z){\mid}\}$$. We prove a generalized L^r extension of the above result for a more general class of polynomials $p(z)=a_nz^n+\sum\limits_{{\nu}={\mu}}^{n}a_n-_{\nu}z^{n-\nu}$, $1{\leq}{\mu}{\leq}n$. We also obtain another L^r analogue of a result for the above general class of polynomials proved by Chanam and Dewan [6].

• Clean Technology
• /
• v.28 no.4
• /
• pp.309-315
• /
• 2022

Research was conducted to derive the optimal operation conditions and the optimal cathode for using a DSA electrode as an anode to minimize electrode consumption during the removal of nitrogen from wastewater by the electro-chemical method. Of the various electrodes tested as cathodes, brass was determined to be the optimal electrode. It had the highest NO₃-N removal rate and the lowest concentration of residual NH₃-N, a by-product when Cl is present in the solution. Investigating the effect of current density found that when the initial concentration of NO₃-N was 50 mg L^-1, the optimal current density was 15 mA cm^-2. In addition, current densities above 15 mA cm^-2 did not significantly affect the NO₃-N removal rate. The effect of electrolytes on removing NO₃-N and minimizing NH₃-N was investigated by using Na₂SO₄ and NaCl as electrolytes and varying the reaction times. When Na₂SO₄ and NaCl are mixed at a ratio of 1.0 g L^-1 to 0.5 g L^-1 and reacted for 90 min at a current density of 15 mA cm^-2 and an initial NO₃-N concentration of 50 mg L^-1, the removal rate of NO₃-N was about 48% and there was no residual NH₃-N. On the other hand, when using only 1.5 g L^-1 of NaCl as an electrolyte, the removal rate of NO₃-N was the highest at about 55% and there was no residual NH₃-N.

• Applied Chemistry
• /
• v.15 no.1
• /
• pp.37-40
• /
• 2011

A chemiluminescent method with silver nanoparticles for determination of L-alanine has been presented. The chemilumiscence intensity was further enhanced by silver nanoparticles in the luminol system by its catalytic role. The silver nanoparticles enhanced chemiluminescent method is applicable for the determination of an amino acid such as alanine. When alanine was introduced to the luminol system with silver nanoparticles, chemiluminescence intensity was reduced with the concentration of the added alanine. The effects of pH, concentrations of luminol, hydrogen peroxide and silver nanoparticles on the chemiluminescence intensity were investigated. The calibration curve for L-alanine was linear over the range from 6.60×10^-8 M to 4.00×10^-7 M, coefficient of correlation was 0.996 and detection limit was 3.5×10^-9 M under the optimal conditions of 4.0×10^-3 M, 4.0×10^-2 M, 4.0×10^-4 M, 12.8 for the concentration of luminol, H₂O₂, silver nanoparticles and pH, respectively.

• Korean Journal of Environmental Biology
• /
• v.41 no.4
• /
• pp.697-705
• /
• 2023

Along with other heavy metals, arsenic (As) is one among the substances most harmful to living organisms including humans. Owing to its morphological similarity to phosphorus, the uptake of As is influenced by photosynthesis and the phosphorus uptake pathway. In this study, we varied arsenic exposure and light intensity during nutrient solution cultivation of lettuce (Lactuca sativa L.) to determine the effect of these two factors on arsenic uptake, lettuce growth, and electron transfer in photosystem II. In the treatment exposed to 30 μmol L^-1 of arsenic, the shoot arsenic concentration increased from 4.73 mg kg^-1 to 18.97 mg kg^-1 as the light intensity increased from 22 to 122 μmol m^-2 s^-1. The water content and ET2o/RC of the shoots were not affected by arsenic at low light intensity; however, at optimal light intensity, they decreased progressively with arsenic exposure. Increased light intensity stimulated the growth of plant roots and shoots; contrarily, the difference in growth decreased as the concentration of As exposure increased. The results of this study suggest that the effect of As on plant growth is dependent on light intensity; in particular, an increase in light intensity can increase the uptake of As, thereby affecting plant growth and As toxicity.

• Archives of Pharmacal Research
• /
• v.18 no.4
• /
• pp.231-236
• /
• 1995

Effects of sodium salts of various monovalent inorganic anions on transdermal permeation of salicylic acid were investigated. In in-vitro experiment using a Franz-type diffusion cell and excisicylic acid were investigated. In-vitro experiment using a Franze-type diffusion cell and excised mouse skin, the permeation-enhancing activities of the sodium salts of inoraganic anions were rougly proportional to lyotropic Hofmeister serlling abilities of the anions l F/sup -/

• Microbiology and Biotechnology Letters
• /
• v.50 no.4
• /
• pp.548-556
• /
• 2022

Acylases can have a significant effect on biofilm formation owing to their quorum quenching activity. In this study, we investigated the effects of acylase treatment episodes on multispecies biofilm development. A consortium composed of 9 species belonging to different genera was allowed to form biofilms for 5 days under various treatment episodes (different treatment periods, 1, 2, 3, or 4 days; and two application timings, beginning or later) at 1, 5, 10, 20 and 50 mg·l^-1 acylase concentrations. The acylase treatment for 5 days showed that acylase concentration was negative with biofilm development (linear regression, Y = -0.05·x + 2.37, p < 0.05, R² = 0.88). Acylase was more effective in reducing biofilm formation when it was applied in the beginning (vs. in later development stage) at all acylase concentrations (p < 0.05). ANOVA indicated that treatment period was significant on biofilm formation in both application timings at ≥ 10 mg·l^-1 (p < 0.05). Linearity test results showed that all slope values between period and biofilm were negative in both timings at ≥ 10 mg·l^-1 (p < 0.05, except for the later application at 20 mg·l^-1). When temporal biofilm dynamics were monitored at 20 mg·l^-1, biofilms gradually increased with time at all treatment episodes (p < 0.05), and slope values in linear regression between biofilm and time were lower when acylase was applied in the beginning (p < 0.05). Our findings suggest the importance of the acylase treatment period and application timing on biofilm control.