• Korean Journal of Acupuncture
• /
• 제30권4호
• /
• pp.252-263
• /
• 2013

목적 : 부항요법은 국소적 부위를 진공상태로 유지시키는 과정 중 유두층 안의 표피혈관을 파괴됨에 따라 발생하는 색소, 응결, 자반, 수포, 압통 반응 등을 살피어 오장육부의 기능이상을 진단하고 있다. 시각에 의존하는 주관적인 혈색소 판별로 인한 진단방법에서 벗어나 정량적으로 측정 및 분석이 가능하기 위하여 교차편광 촬영술을 접목하였으며, 새로운 혈색소 평가 가능성을 확인하고자 하였다. 방법 : 족태양방광경의 좌/우 폐수(BL13), 심수(BL15), 간수(BL18), 신수(BL23) 총 10개에 80 kPa 의 음압으로 1분 동안 자극하였다. 교차편광 촬영술을 이용하여 부항 자극 직전과 60분 이후까지 2분마다 이미지를 획득하였다. 획득한 이미지에서 $L^*a^*b^*$ space로 변환하여 분석하였으며, RGB space에서 홍반지수 (E.I: erythema index)를 계산하여 분석하였다. 또한 부항 자극 전 각 경혈에서 젖산 농도를 측정하여 색 지표들간의 관계성 분석을 통하여, 근육의 상태와 부항 자극으로 유도된 피부 색 변화와의 관계를 확인하고자 하였다. 결과 : 교차편광 촬영술을 이용하여 획득한 이미지에서의 $L^*$, $a^*$ 그리고 E.I 모두 부항 자극에 따른 피부 색 변화를 정량적으로 나타낼 수 있는 유의한 지표임을 확인하였다. 부항 자극 40분 후에 피부 색 변화가 더 이상 관찰되지 않았다. 또한 각 경혈에서의 젖산 농도와 피부 색 변화 정도와 유의한 차이가 없음을 확인하였다. 결론 : 설진을 포함하여 한의학적 색 진단을 하기 위한 방법으로 교차편광 촬영술 활용 가능성을 확인하였다. 또한 $L^*$, $a^*$ 그리고 E.I 모두 색 지표로서 유의성을 확인하였다. 향후, 장부 기능 이상과 혈색소 반응간의 상관성을 확보하기 위한 연구가 진행하기 전에, 음압 도중 발생하는 조직 내 다양한 반응과 혈색소 반응간의 관계를 확보하고자 하는 노력이 우선적으로 진행되어야 한다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1996년도 제11회 학술발표회 논문개요집
• /
• pp.40-41
• /
• 1996

Nitridation technique has been receiving much attention for the formation of a thin nitrided buffer layer on which high quality nitride films can be formedl. Particularly, gallium nitride (GaN) has been considered as a promising material for blue-and ultraviolet-emitting devices. It can also be used for in situ formed and stable passivation layers for selective growth of $GaAs_2$. In this work, formation of a thin nitrided layer is investigated. Nitrogen electron cyclotron resonance(ECR)-plasma is employed for the formation of thin nitrided layer. The plasma source used in this work is a compact ECR plasma gun3 which is specifically designed to enhance control, and to provide in-situ monitoring of plasma parameters during plasma-assisted processing. Microwave power of 100-200 W was used to excite the plasma which was emitted from an orifice of 25 rnm in diameter. The substrate were positioned 15 em away from the orifice of plasma source. Prior to nitridation is performed, the surface of n-type (001)GaAs was exposed to hydrogen plasma for 20 min at $300{\;}^{\circ}C$ in order to eliminate a native oxide formed on GaAs surface. Change from ring to streak in RHEED pattern can be obtained through the irradiation of hydrogen plasma, indicating a clean surface. Nitridation was carried out for 5-40 min at $RT-600{\;}^{\circ}C$ in a ECR plasma-assisted molecular beam epitaxy system. Typical chamber pressure was $7.5{\times}lO^{-4}$ Torr during the nitridations at $N_2$ flow rate of 10 seem.(omitted)mitted)

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1998년도 제14회 학술발표회 논문개요집
• /
• pp.133-133
• /
• 1998

In the thin film alloy formation of the transition metals ion-beam-mixing technique forms a metastable structure which cannot be found in the arc-melted metal alloys. Sppecifically it is well known that the studies about the electronic structure of ion-beam-mixed alloys pprovide the useful information in understanding the metastable structures in the metal alloy. We studied the electronic change in the ion-beam-mixed ppt-Ct alloys by XppS and XANES. These analysis tools pprovide us information about the charge transfer in the valence band of intermetallic bonding. The multi-layered films were depposited on the SiO2 substrate by the sequential electron beam evapporation at a ppressure of less than 5$\times$10-7 Torr. These compprise of 4 ppairs of ppt and Cu layers where thicknesses of each layer were varied in order to change the alloy compposition. Ion-beam-mixing pprocess was carried out with 80 keV Ae+ ions with a dose of $1.5\times$ 1016 Ar+/cm2 at room tempperature. The core and valence level energy shift in these system were investigated by x-ray pphotoelectron sppectroscoppy(XppS) pphotoelectrons were excited by monochromatized Al K ａ(1486.6 eV) The ppass energy of the hemisppherical analyzer was 23.5 eV. Core-level binding energies were calibrated with the Fermi level edge. ppt L3-edge and Cu K-edge XANES sppectra were measured with the flourescence mode detector at the 3C1 beam line of the ppLS (ppohang light source). By using the change of White line(WL) area of the each metal sites and the core level shift we can obtain the information about the electrons pparticippating in the intermetallic bonding of the ion-beam-mixed alloys.

• 동아시아식생활학회지
• /
• 제15권1호
• /
• pp.106-111
• /
• 2005

The gamma irradiation effect of dried fernbraken was investigated on the physical and sensory qualities during and after soaking process. Dried fernbraken packaged in vacuum was irradiated up to 7 kGy with v-ray produced by 132 Cs at 0℃. Moisture content and rehydration rate of gamma-irradiated fernbraken after soaking increased significantly depending on the irradiation doses(p<0.05). Lightness(L), redness(a) and yellowness(b) values of Hunter color system increased significantly in the gamma-irradiated fernbraken after soaking, compared with control, while the hardness and chewiness by the texture analyser decreased significantly in irradiated ones. Sensory evaluation results showed that the mean scores of flavor, appearance, taste, texture and over-all acceptability in soaked fernbraken irradiated were not significantly different from those in control, except higher preference score of texture in irradiated ones. From these results, it might be concluded that the irradiation does not affect the physical and sensory qualities of dried fernbraken during and after soaking, especially in texture.

• 한국표면공학회지
• /
• 제50권3호
• /
• pp.192-197
• /
• 2017

A 6-way-cross consisting of a 2.75-inch CF flange was used as a main chamber on a PFEIFFER VACUUM TMP station based on a 67 l / sec turbo molecular pump and a diaphragm pump to produce a magnet array with a volume ratio of 5.5: 1.A 1-inch diameter copper target and graphite target were fabricated using MDX-1.5K from Advanced Energy Industries, Inc as a DC power supply. Ion current density of copper target and graphite target was measured by unbalanced magnetron sputtering. The basic pressure condition was $6.3{\times}10^{-7}mbar$ and the process pressure was Ar 50 sccm at $1.0{\times}10^{-2}mbar$ (7.5 mTorr) in the Ar atmosphere. Therefore, the relative density of copper ions reaching the substrate with the measured ion current density was derived.

• 한국재료학회지
• /
• 제9권4호
• /
• pp.414-418
• /
• 1999

Typical metal oxide thin films having optical and electrical properties are widely used as inorganic functional materials. Liquid phase deposition(LPD) method, a new low temperature process, has been developed for the several advantages of no vacuum system, low cost, high throughput, and low processing temperature(<$50^{\circ}C$). Silica powder was added to 40wt% hydrofluoro-silicic acid($H_2$SiF\ulcorner) to obtain an immersing solution of silica-saturated hydrofluorosilicic acid solution. Boric acid solution was continuously added in the range from 0 to 0.05M to prepare supersaturated hydrofluorosilicic acid solution. LPD $SiL_2$film was formed with the variation of added amount of $H_2$O. The SiO$_2$thin film could be prepared from hydrofluorosilicic acid by LPD method. The thickness of LPD $_SiO2$film was influenced by the boric acid concentration and added amount of $H_2$O. Silicon in thin film existed as SiF\ulcorner by Raman spectrum.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1575-1577
• /
• 2002

In this study, multi layer type OLED(Organic Light Emitting Diode) has been fabricated using $Snq_2$, $Snq_4$, and $Alq_3$ for development of high efficiency, electrical and optical properties of multi layer type OLED investigated. The HTL(Hole Transfer Layer) and EML(Emitting Material Layer) were fabricated by using vacuum evaporation on ITO electrode, and its thickness controlled using thickness monitor. Al was used as a cathode. The electrical and optical properties such as J-V, brightness-V and EL spectrum of OLED device was measured using I.V.L.T system. The result, brightness of $Alq_3$, $Snq_2$ and $Snq_4$ were $3900cd/m^2$, $63cd/m^2$ and $23cd/m^2$ respectively.

• Journal of Applied Biological Chemistry
• /
• 제42권3호
• /
• pp.113-118
• /
• 1999

The transgenic plant of Citrus species (Citrus aurantium L.) was constructed with a fatty acid desaturase gene using microprojectile bombardment transformation system. The DNA of a fatty acid desaturase gene, fad7, constructed in pBI121 was coated onto tungsten particles ($1.1{\mu}m$) and introduced into callus cells by bombarding with 1100 psi of helium pressure, 1/4 in of gap distance, 7.0 cm of target distance and 27 in Hg of chamber vacuum. The bombarded cells were selected on the medium containing kanamycin. The selected cells were successfully regenerated into plantlets via somatic embryogenesis on the media containing plant growth regulators. The results of polymerase chain reaction analysis of genomic DNAs from the putative transformants showed that the introduced DNAs of fad7 were present in both the selected callus cells and the regenerated plantlets.

• 한국해양공학회지
• /
• 제2권2호
• /
• pp.130-137
• /
• 1988

This thesis introduced that character of a treatment technique for a mading synthetic resin Hifiow-Ring. The material system of packings make an experiment air$NH_{3}$/air$H_{2}SO_{4}$, $SO_{2}$-air/NaOH, $NH_{3}$-air/$/H_{2}SO_{4}$ under general conditions. Lattices packing compared with conventional packings was proved low pressure loss and high separation efficiency for high loading per trans unit. And an inflow materal tested for absorption and rectification, it made an experiment under a range regular temperature, low energy and small amount of money. That made possible in simple equation, volume material tranfer coefficient$\beta_{L}$ . a by absorption or $\beta_{V}$ .a calculated in all range loading. The peculiarity pressure loss $\Delta\;P/NUT_{ov}$ for Hiflow-ring contributed to a fall cost of energy, a grade number of a vacuum rectification and absorption calculation.

• 한국수산과학회지
• /
• 제49권4호
• /
• pp.427-435
• /
• 2016

The effects of salt solution and chlorella on the quality of canned oyster, Crassostrea gigas, were evaluated to obtain basic data regarding the processing of two canned oyster products. In canned oyster processing, the shucked oyster meat was steamed for 20 min and then drained. Then, each can (301-3) was filled with 90 g boiled oyster in 60 mL 1.5% salt solution for the control samples or 30 mL 1.5% salt solution and 30 mL chlorella culture medium for the experimental samples. All canned products were sealed using a vacuum seamer and then sterilized to Fo values of 6-12 min in a steam retort system at 118℃. The viable bacteria count, proximate composition, pH, salinity, yield, volatile basic nitrogen (VBN), amino-nitrogen, thiobarbituric acid (TBA), mineral, color value, free amino acid levels, hardness, and sensory evaluation of the two canned products were measured under various sterilization conditions. There were no significant differences in the physical or chemical factors and little difference in the overall acceptance of the control and experimental samples.