• Korean Journal of Weed Science
• /
• v.10 no.4
• /
• pp.269-276
• /
• 1990

Weed species belonging to the broadleaf family prevailed in the experimental sites followed by Cyperucea and grass family. In terms of life cycle, the dominant weed species were the perennial weeds rather than annual weeds. Most of weeds were emerged between 30-60days after transplanting in Chuncheon and between 40-60 days after transplanting in Hongcheon and Hoengseong areas. Among agronomic characteristics of rice affected by weed emergence were decrease of plant height by 2-4㎝, panicle number by 1.3-2.9, spkelet by 3. 7-7.5, ripening rates by 3.3-6.5%, and milled yield by 12-17%.

• Korean Journal of Weed Science
• /
• v.10 no.2
• /
• pp.83-92
• /
• 1990

Experiment was conducted to establish the weed control system on the paddy fields by investigating species, period and amount of weeds in Gangwon province. Four locations were selected for these experiments : West plain area, Chunchon(74m above the sea level), mid-mountainous area, Hongchon(300 m), high alpine area, Hoengsong(450m), and east sea area, Myungju(14m). Weed emergence was investigated 6 times from 10 days after transplanting to 60 days with 10 days interval. From the experiments stated above, the results were summarized as follows ; The identity of weed species was small in grass family, but broad-leaf family was numerous. Also the dominant weed species was generally the perenial weeds. The weed emergence was initiated from 10 days after translanting. The amounts of weed counted the most in Chunchon. A large number of weeds were emerged between 30-60 days after transplanting in Chunchon and between 40-60 days after transplanting in Hongchon and Hoengsong. Among agronomic characteristics affected by weed emergence during rice development, plant height was decreased by 2~4cm, panicle number by 1.3~2.9, spikelet by 3.7~7.5, ripening rates 3.3~6.5%, and milled yield by 12~17%, respectively.

• Korean Journal of Food Science and Technology
• /
• v.25 no.5
• /
• pp.449-455
• /
• 1993

Vibrio vulnificus is a recentry recognized halophilic organism that may cause human infections. Patients infected with Vibrio vulnificus often have a history of exposure to the sea, suggesting that the organism may be common inhabitant of marine environment. In this studies 314 samples were collected from 9 sites of Chonnam coastal area, from April to Jun, 1993. Isolation rates of V. vulnificus were 7.1% in total samples, 33.3% in sea water, 55.5% in sediment, 1.7% in fish and shellfish, 6.3% in kitchen environment. In each areas of Chunnam V. vunificus were isolated from 3.6% to 11.4%. The isolation rates of V. vulnificus was correlated positively with organic matter and COD in sea warer and sediment. In sea water, Microorganism population were $4.5{\times}10^3{\sim}3.5{\times}10^5\;CFU/ml$, Vibrio strains were $1.8{\times}10^l4.6{\times}10^3\;CFU/ml$, Coliform bacteria were $1.9{\times}10^1{\times}3.7{\times}10^2\;CFU/100ml$. In sediment, Microorganism population were $4.8{\times}10^3{\sim}5.2{\times}10^5\;CFU/ml$. Vibrio strains were $1.9{\times}10^2{\sim}8.4{\times}10^4\;CFU/ml$, Coliform bacteria were $7.2{\times}10^1{\sim}9.9{\times}10^2\;CFU/100ml$.

• Food Science of Animal Resources
• /
• v.32 no.5
• /
• pp.659-668
• /
• 2012

The objective of this research was to investigate the effect of marbling scores on carcass grade factors, physico-chemical and sensory traits of Hanwoo. Data used in this study were collected from 73,316 carcasses obtained at the Nonghyup Seoul slaughterhouse in 2009 and 271 cuts of M. longissimusdorsi were analyzed to estimate beef qualities. As the marbling scores increased, backfat thickness was linearly increased (p<0.05) in cows (9.51 mm-14.69 mm) and steers (8.71 mm-14.23 mm). As the marbling scores increased, maturity of cows was increased and meat color, texture and quality grade improved for all genders. With increase of the marbling scores, crude fat contents (3.07%-26.70%), water holding capacity (52.09%-58.66%), $L^*$ value (34.08-41.97) were significantly increased (p<0.05) and Warner-Bratzler shear force was linearly decreased (p<0.05) from 8.58 kg to 2.60 kg. The increase of crude fat contents had the similar interval with the increase of marbling scores from 1 to 6 but it is sharply increased from marbling score 7. There was no difference observed on $pH_{24}$ (5.50-5.66), protein contents (19.57%-21.15%) among the marbling scores. Marbling score was significantly correlated with live weight (r=0.29) in cows, loineye area (r=0.35) in steer, and overall acceptability of panel scores (r=0.67) (p<0.01).

• Applied Biological Chemistry
• /
• v.18 no.4
• /
• pp.194-202
• /
• 1975

This study was conducted to study the properties of the water-soluble natural chelating agents from garbage compost and activated sewage sludge responsible for Fe chelation, which is closely associated with the effectiveness in correcting iron chlorosis in plant. The water-soluble fraction of these materials was fractionated by menas of Sephadex gel filtration and the fractions of Fe chehates were traced by radioactive $^{59}Fe$. The fractions were examined by ultraviolet and infrared. spectroscopy and stability constants for Fe. The water-soluble fraction from garbage compost was separated by Sephadex G-25 into approximately four fractions. Most of the added $^{59}Fe$ was associated with fraction I, which appeared at the void volume. Further fractionation by Sephadex G-50 indicated that the molecular weight of water-soluble chelating agents is in the approximate range of 5000 to 10,000. The water-soluble fraction from activated sewage sludge gave six fractions by Sephadex G-25. Most of the added $^{59}Fe$ was found in the fraction I,II, and III, The molecular weights of most chelating agents associated with $^{59}Fe$ appeared to be less than 5,000 and those of fraction I that appeared at the void volume was in the range of 5,000 to 1,000. Discrepancy between radio activity count and UV absorption indicated the heterogeneity of the fractions obtained by Sephadex gel filtration. Ultraviolet absorption spectra of all fractions separated by Sephadex G-25 and containing chelating agents showed no differences. Fraction IV and V of sewage extract showed absorption maxima and shifting similar to nucleic acid components suggesting the presence of decomposition products of nucleic acid. Similarity fraction VI contained phenolic type amino acid groups. Fraction I of compost extract contained most of the added $^{59}Fe$ and showed weak but extra definite absorption in the 1230, and $1270cm^{-1}$ region, suggesting that extra oxygen groups in polyphenolic structure were probably involved in Fe chelation. In sewage extract, fraction I,II, and III in which most of the $^{59}Fe$ was found, showed strong definite polypeptide absorption in the region of $1540cm^{-1}$ due to NH deformation and C-N stretching of amide groups in the peptidebond. These extra functional groups in fraction I, II, and III appeared to be associated with Fe chelation. The other fractions, not associated with $^{59}Fe$, still have carboxyl and hydroxyl groups, suggesting that these functional groups in these water extracts may not independently form the Fe chelates. Precipitation of ferric hydroxide precluded measuring the stability constants for Fe-chelates. However, the formation constants for Zn chelates as log K values for compost extract and sewage extract at pH 4.0 from which the strength of chelation with Fe could be presumed, were 8.23, and 9.75, respectively, indicating strong complexation with metals. The chelating capacity of compost extract containing 6.5 g organic matter per liter was 0.82 mM, and that of sewage extract containing 5.3 g per liter was 0. 64 mM.

• Korean Journal of Soil Science and Fertilizer
• /
• v.11 no.2
• /
• pp.119-126
• /
• 1979

Rice seeds, suweon 264, were germinated under 5 levels of toxic heavy metals, Cd(0, 0.05, 0.5, 5, 20ppm), Cu(0, 0.05, 0.5, 5, 20, ppm), Cr(0, 0.5, 1, 5, 10ppm), Ni(0, 0.5, 1, 5, 10ppm), Co(0, 0.5, 1, 5, 10ppm), Zn(0, 0.5, 5, 20, 40, ppm), Pb(0, 0.5, 5, 20, 40ppm) and Mn(0, 1, 10, 25, 50, ppm) in culture solution, and then grown with supplying culture solution contained respective concentrations. Germination and growth response to the toxic heavy metals were studied. Results obtained are as follows : 1) The germination injury of rice seeds by excess concentration of toxic heave metal in culture solution occured in Cd and Cu; below 0.05 ppm, Ni; below 0.5 ppm, Mn; below 1.0 ppm, Co and Cr; 0.5-1.0 ppm, and 0.5-5 ppm, Zn and Pb. Thereby, in the order of degrees of the elements toxicity to germination, they were arranged as follows : Cd>Cu>Ni>Co>Cr>Mn>Zn$$\geq_-$$Pb. 2) Toxic heavy metal concentrations in culture solution, which result in decreasing dry weight due to the injury of excess concentration of treated elements, were Cd: below 0.05 ppm, Ni, Cr and Co; below 0.5 ppm, Cu and Zn; 0.5-5 ppm, Pb; 5-20 ppm and Mn; 10-25 ppm. The order was Ni>Cd>Cr>Co>Cu$$\geq_-$$Zn>Pb>Mn. 3) The critical contents of Cd, Ni, Pb, Cu, Zn, Mn, and Co in dry matter, Which result in decreasing dry weight, were considered to be 0.05-15.5, 1.50-25.0, 24.0-28.0, 26.5-62.5, 470-645.0, 231.0-500.0 and below 15.0 ppm, respectively. 4) The contents of Cr, Co, Cd, Pb, Ni, Cu and Zn in dry matter by 0.5 ppm treatment concentration of each heavy metals was trace, 15.0, 17.5, 24.0, 25.0, 84.5 and 470.0 ppm, respectively. Thereby, in the order of each element to uptaked by rice seedlings, they were arranged as follow; Zn>Cu>Ni>Pb>Cd>Co>Cr. 5) The hazardous concentrations of root activity by toxic heavy metals in culture solution were Cd; below 0.05, Cu; 0.05-0.5, Cr; below 0.5, Ni; 0.5-1.0, Co; 0.5-1.0, Zn; above 0.5, Pb; 0.5-5.0 and Mn; 1.0-10.0 ppm. The hazardous degree of root activity by toxic heave metals was in the order of Cd>Cu>Cr>Zn>Ni>Co>Pb>Mn.

• Korean Journal of Weed Science
• /
• v.3 no.2
• /
• pp.143-150
• /
• 1983

Red rice (local name "Sore") as a weed has been a serious threat to rice production in direct-seeded rice culture in Ganghwagun, Gyeonggi province. In the Ganghwagun 508 ha out of 1,420 ha in the Samsanmyeon area is infested with red rice. The average lowland rice yield is about 4,300 kg/ha in the Ganghwagun, but the average upland rice yield is about 2,000 kg/ha in infested area. This study was carried out in order to clarify the ecological characteristics of red rice and factors affecting the competitive ability of five red rice varieties, collected from Samsanmyeon in 1981, with rice cultivar. Five varieties-Monggeunsare, Salsare, Ginkaragsare, Galsaegsalsare, Galsaegkaragsare-showed the same morphological characteristics of cultivated Japonica type, Chuncheongbyeo, but red rice tillers more profusely, is taller and lodges more easily than Chucheongbyeo. It shatters easily about 10-15 days after heading date, and at this time the hull is discolored in yellow or dark brown. There are many types of red rice with short or long owns on the spikelet, occasionally with or without own on the spikelet in the same hill, and the grains are short or long. In red reice leaf blast occurs more severely than in cultivated Indica/Japonica type, Teabaegbyeo, particulary serious in Monggeunsare. When red rice invaded in direct-seeded rice, number of panicles of rice became reduced more than other yield components.

• The Korean Journal of Nuclear Medicine
• /
• v.29 no.4
• /
• pp.533-540
• /
• 1995

Attenuation correction is important in producing quantitative positron emission tomography (PET) images. Conventionally, photon attenuation effects are corrected using transmission measurements performed before tracer administration. The pre-injection transmission measurement approach may require a time delay between transmission and emission scans for the tracer studies requiring a long uptake period, about 45 minutes for F-18 deoxyglucose study. The time delay will limit patient throughput and increase the likelihood of patient motion. A technique lot performing simultaneous transmission and emission scans (T+E method) after the tracer injection has been validated. The T+E method substracts the emission counts contaminating the transmission measurements to produce accurate attenuation correction coefficients. This method has been evaluated in experiments using a cylindrical phantom filled with background water (5750 cc) containing $0.4{\mu}Ci/cc$ of F-18 fluoride ion and one insert cylinder (276 cc) containing $4.3{\mu}Ci/cc$. GE $Advance^{TM}$ PET scanner and Ge-68 rotating pin sources for transmission scanning were used for this investigation. Post-injection transmission scan and emission scan were peformed alternatively over time. The error in emission images corrected using post-infection transmission scan to emission images corrected transmission scan was 2.6% at the concentration of $1.0{\mu}Ci/cc$. No obvious differences in image quality and noise were apparent between the two images. The attenuation correction can be accomplished with post-injection transmission measurement using rotating pin sources and this method can significantly shorten the time between transmission and omission scans and thereby reduce the likelihood of patient motion and increase scanning throughput in PET.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.16 no.1
• /
• pp.3293-3301
• /
• 1974

An experimental work was conducted by using a laboratory-made model dryer to investigate the effect of the rate of natural forced-air on the drying rate of rough rice which was deposited in the deep-bed. The dryer consisted of 8 cylinderical containers with grain holding screen at their bottoms, each of which having 30cm in diameter and 15cm in height. The containers were sacked vertically with keeping them air-tight by using paper tape during dryer operation. Two separate layers of containers were operated in the same time to have two replications. The moisture contents of grains within each bins after predetermined period of dryer operation were determined indirectly by measuring the weight of the individual containers. The air-rates were maintained at 6 levels, or 5, 8, 10, 15, 18 and 20 millimenters of static head of water. The roomair conditions during dryer operation were maintained in the range of 10-l5$^{\circ}C$ in temperature and 40-60% in relative humidity. The results of the study are summarized as follows: 1. Drying characteristics of the grains in the bottom layers were approximately the same regardless of airdelivery rates, giving the average drying rate as about 0.35 percent per hour after 40-hour drying period, during which moisture content (w. b.) reduced from 24 percent to about 10 percent. 2. After about 40-hour drying period, the mean drying rates increased from 0.163 percent per hour to 0.263 percent per hour as air-flow rates increased from 5mm to 87.16mm of static head of water. In the same time, the moisture differences of grains between lower and upper layers varied from 12.7 percent at the air rate of 5mm of water head to 7.5 percent at the air-flow rate of 20mn of water head. Thus, the greater the air-flow rate was, the more overall improvement in drying performance was. Additionally, from the result of ineffectiveness of drying grain positioned at 70cm depth or above by the air rate of 5mm of static head of water it may be suggested in practical application that the height of grain deposit would be maintained adequately within the limits of air-rates that may be actually delivered. 3. Drying after layer-turning operation was continued for about 30 hours to test the effectiveness of reducing moisture differences in the thick layers. As a result of this layer-turning operation, moisture distribution through layers approached to narrow ranges, giving the moisture range as about 7 percent at air-flow rate of 5mm head of water, about 3 percent at 10mm head about 2 percent at 15mm head, and less than 1 percent at 20mm head. In addition, from the desirable results that drying rate was rapid in the lower layers and dully in the upper layers, layer-turning operation may be very effective in natural air drying with deep-layer grain deposit, especially when the forced air was kept in low rate. 4. Even though the high rate of air delivery is very desirable for deep-layer natural-air drying of rough rice, it can be happened that the required air delivery rate could not be attained because of limitation of power source available on farms. To give a guide line for the practical application, the power required to perform the drying with the specified air rate was analyzed for different sizes of drying bin and is given in Table (5). If a farmer selects a motor of which size is 1 or {{{{1 { 1} over {2 } }}}} H.P. and air-delivery rate which ranges from 8~10mm of head, the diameter of grain bin may be suggested to choose about 2.4m, also power tiller or other moderate size of prime motor may be recommended when the diameter of grain bin is about 5.0m or more for about 120cm grain deposit.

• Journal of Pharmaceutical Investigation
• /
• v.31 no.4
• /
• pp.289-295
• /
• 2001

Carvedilol is an antihypertensive and antianginal compound that combines nonselective beta-adrenoceptor blocking and vasodilation properties and is devoid of intrinsic sympathomimetic activity. The purpose of the present study was to evaluate the bioequivalence of two carvedilol tablets, $Dilatrend^{TM}$ (Chong Kun Dang Pharmaceutical Co., Ltd.) and $Carvelol^{TM}$ (Dae Won Pharmaceutical Co., Ltd.), according to the prior and revised guidelines of Korea Food and Drug Administration (KFDA). The carvedilol release from the two carvedilol tablets in vitro was tested using KP VII Apparatus II method with various different kinds of dissolution media (pH 1.2, 4.0, 6.8 buffer solution, water and blend of PSB80 into water). Eighteen normal male volunteers, $24.22{\pm}1.86$ years in age and $64.81{\pm}4.56\;kg$ in body weight, were divided into two groups and a randomized $2{\times}2$ cross-over study was employed. After one tablet containing 25 mg of carvedilol was orally administered, blood was taken at predetermined time intervals and the concentrations of carvedilol in serum were determined using HPLC method with fluorescence detector. The dissolution profiles of two carvedilol tablets were very similar at all dissolution media. Besides, the pharmacokinetic parameters such as $AUC_t$, $C_{max}$ and $T_{max}$ were calculated and ANOVA test was utilized for the statistical analysis of the parameters using non-transformed and logarithmically transformed $AUC_t$ and $C_{max}$. The results showed that the differences in $AUC_t$, $C_{max}$ and $T_{max}$ between two tablets based on the $Dilatrend^{TM}$ were 2.23%, -2.00% and 0.00%, respectively. Minimum detectable differences $({\Delta})$ at ${\alpha}=0.05$ and $1-{\beta}=0.8$ were less than 20% (e.g., 13.55% and 17.61% for $AUC_t$ and $C_{max}$, respectively). The powers $(l-{\beta})$ at ${\alpha}=0.05$, ${\Delta}=0.2$ for $AUC_t$ and $C_{max}$ were 98.08% and 88.81%, respectively. The 90% confidence intervals were within ${\pm}20%$ (e.g., $-5.69{\sim}10.16$ and $-12.30{\sim}8.30$ for $AUC_t$ and $C_{max}$, respectively). There were no sequence effect between two tablets in logarithmically transformed $AUC_t$ and $C_{max}$. The 90% confidence intervals using logarithmically transformed were within the acceptance range of log(0.8) to log(1.25) (e.g., $0.95{\sim}1.11$ and $0.89{\sim}1.09$ for $AUC_t$ and $C_{max}$, respectively). Two parameters met the criteria of prior and revised KFDA guideline for bioequivalence, indicating that $Carvelol^{TM}$ tablet is bioequivalent to $Dilatrend^{TM}$ tablet.