• Journal of Microbiology and Biotechnology
• /
• v.1 no.2
• /
• pp.121-125
• /
• 1991

The culture conditions and nutritional requirements for enhanced mycelial growth of the ectomycorrhizal fungus P. tinctorius SMF were determined in flask scale experiments. Optimum culture conditions for growth of P. tinctorius SMF in a further modified Melin-Norkrans broth were as follows; temperature 25~$27^{\circ}C$, agitation 120 rpm, and pH 4.0. P. tinctorius SMF utilized various carbon sources including monosaccharides, disaccharides, and polysaccharides. D-Glucose and mannitol were respectively the first and second most suitable carbon sources for mycelial growth. With D-Glucose as the principal carbon source, supplementation of modified Melin-Norkrans (MMN) broth with Lysine (800 mg/l), Glutamic Acid (500 mg/l), or Proline (50 mg/l) enhanced mycelial yields 63%, 34%, and 22% respectively as compared to growth in medium lacking amino acids. ThiaminㆍHCl＋biotin＋pyridoxine supplementation also enhanced growth. As compared to mycelial growth in the MMN medium, growth of P. tinctorius SMF was enhanced 120% in MMN broth when the carbon/nitrogen ratio was 25/1 in citrate buffer at pH 4.5, and growth was 50% greater in MMN broth of carbon/nitrogen ratio with a 10/1~20/1 without using the buffer. Standard conditions established for growth of P. tinctorius SMF in MMN broth were 25~$27^{\circ}C$, agitation 120 rpm, buffered to pH 4.0 with citrate, in MMN medium containing 10 g/l D-glucose supplemented with 800 mg/l lysine. In this medium the carbon/nitrogen ratio was 20/1~25/1, and the maximal mycelial yield ($Y_{x/s}$ ) was 0.472 (4.72 mg/ml) after 7 days of incubation, as compared to 0.214 (2.14 mg/ml), when the fungus was grown in standard MMN broth.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.47 no.1
• /
• pp.1-9
• /
• 2011

In order to investigate the cause and magnitude of scale effect occurring in the model experiments of fishing nets, five pairs of Nylon pyramid nets and one pair of PE ones in which all the two nets paired were equal each other in the factors determining their flow resistance, i. e., the ratio d/l of diameter d to length l of bars, the angle f between two adjacent bars, the attack angle q of nettings to the water flow, and the wall area S of nets, and different in the values of d and l were prepared. Then, the nets were attached to the circular steel frame alternately and their flow resistances with shapes in water were measured on the sea ascribing no turbulent flows by using the tension meter made of a block bearing for the experiment. All the Nylon nets were spreads out easily in water to form a circular cone at relatively low velocity of water and showed the resistance smaller a little in the nets with larger d and l than them with smaller d and l, because the filtration of water through meshes become easier in nets especially with larger l. But PE nettings were not spread out sufficiently on account of their small flexibility and showed higher resistance especially in them with thicker twines. Therefore, the difference in bar length or mesh size and flexibility of nettings between prototype and model nets are regarded to become factors ascribing scale effect. Especially the influence of the difference in mesh size may become large significantly in actual model experiments because the mesh size of model nets is decided at much larger value than that given by scale ratio and so the difference of mesh size between the two nets become much larger than that between nets used in this experiment.

• Geomechanics and Engineering
• /
• v.34 no.2
• /
• pp.115-124
• /
• 2023

By conducting three-dimensional simulation with consideration of small-strain characteristics of soil stiffness, the effects of excavation geometry and tunnel cover to diameter ratio on deformation mechanisms of an existing tunnel located either at a side of basement or directly underneath the basement were systematically studied. Field measurements were used to verify the numerical model and model parameters. For basement excavated at a side of an existing tunnel, the maximum settlement and horizontal displacement of the tunnel are always observed at the tunnel springline closer to basement and tunnel crown, respectively, regardless of basement geometry. By increasing basement length and width by five times, the maximum movements of tunnel located at the side of basement and directly underneath the basement increase by 450% and 186%, respectively. Obviously, tunnel movements are more sensitive to basement length rather than basement width. For basement excavated at a side of an existing tunnel, tunnel movements at basement centerline become stable when basement length reaches 10 H_e (i.e., final excavation depth). Moreover, tunnel heaves due to overlying basement excavation become stable when the normalized basement length (L/H_e) is larger than 8.0. As tunnel cover to diameter ratio varies from 2.5 to 3.0, the maximum heave and tensile strain of tunnel due to overlying basement excavation decrease by up to 41.0% and 44.5%, respectively. If basement length is less than 8 H_e, the assumption of plane strain condition of basement-tunnel interaction grossly overestimates tunnel movements, and ignores tensile strain of tunnel along its longitudinal direction. Thus, three-dimensional numerical analyses are required to obtain a reasonable estimation of tunnel responses due to adjacent and overlying basement excavations in clay.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.15 no.3
• /
• pp.247-256
• /
• 2012

Stable carbon isotope ratio of oil components are known to be unaffected by weathering processes and thus has been widely used to determine the origin of spilled oil. In this study, molecular index and composition of stable carbon isotope in 15 crude oils and petroleum product were analyzed and used as oil fingerprints to determine the discriminating power of each fingerprinting method among target crude oils. Through the fingerprints of alkane distribution only Bintulu and B-C(1%) were distinguishable from other crude oils. The pristane/phytane ratio can classify the crude oils into three groups but differentiation of crude oils within a group was impossible using the ratio. The crude oils of A.L., A.S.L., Foroozan and B-C(1%) were differentiated from the other oils using PAH source recognition indexes of C2D/C2P and C3D/C3P. The usage of 4-mD/1-mD and 2/3-mD/1-mD ratio was able to distinguish A.S.L., Bintulu and Oman from the other crude oils. However the PAH source recognition ratios in the other crude oils were similar and thus they were impractical to be used for source identification among the target crude oils. Stable carbon isotope ratios of alkanes were able to uniquely specify each crude oil in the plot of ${\delta}^{13}C_{C21}$ and ${\delta}^{13}C_{C25}$ except A.L., A.M., Qatar-Marine, B-C(1%). The oil fingerprinting method using stable carbon isotope ratios of individual alkane compounds showed more discriminating power among the target crude oils than the conventional source recognition indexes of PAHs or alkanes.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2000.09a
• /
• pp.201-210
• /
• 2000

Rock bridge in rock masses can be considered as one of several types of opening-mode fractures, and also it has been known to have a great influence on the stability of structures in rock mats. In the beginning of researching a rock bridge it used to be studied only in characteristics of its behavior, as considering resistance of material itself. However the distribution pattern of rock bridges, which can affect the stability of rock structures, is currently researched with a fracture mechanical approach in numerical studies. For investigating the effect of rock bridges on the development pattern of hydraulic fractures, the author analyzed numerically the stress state transition in rock bridges and their phenomena with a different pattern of the rock bridge distributons. From the numerical studies, a two-crack configuration could be defined to be representative of the most critical conditions for rock bridges, only when cracks are systematic and same in their length and angle. Moreover, coalescence stresses and onset of propagation stresses could be known to increase with decreasing s/L ratio or increasing d/L ratio. The effect of pre-existing crack on hydraulic fracturing was studied also in numerical models. Different to the simple hydraulic fracturing modeling in which the fractures propagated exactly parallel to the maximum remote stress, the hydraulic fractures with pre-existing cracks dial not propagate parallel to the maximum remote stress direction. These are representative of the tendency to change the hydraulic fractures direction because of the existence of pre-existing crack. Therefore s/L, d/L ratios will be identical as a function effective on hydraulic fractures propagation, that is, the $K_{I}$ vague increase with decreasing s/L ratio or increasing d/L ratio and its magnification from onset to propagation increases with decreasing s/L ratio. The scanline is a commonly used method to estimate the fracture distribution on outcrops. The data obtained from the scanline method can be applied to the evaluation of stress field in rock mass.s.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.7
• /
• pp.1119-1125
• /
• 2004

The effect of hemicellulose extracted from soy fiber on the level of blood glucose and serum cholesterol in the streptozotocin-induced diabetic rat were investigated. The experimental plots were divided to cellulose group (control, 0.5％ hemicellulose group (H-l) and 1％ hemicellulose group (H-2) group. The groups were fed for 6 weeks, then fed for 1 week more after streptozotocin injection. Food intakes, weight gain and food efficiency ratio of H-2 group were higher, while water intakes and liver weight were lower than those of control and H-l group. The content of blood glucose and urine glucose were 212.8 mg/dL, 0.97 mg/dL in the control group, 160.5 mg/dL, 0.53 mg/dL in the H-l group, 141.0 mg/dL, 0.35 mg/dL in the H-2 group, respectively. There was no significantly difference in the content of neutral lipid, while the content of total serum cholesterol was 101.6 mg/dL in the control group, 73.8-78.4 mg/dL in the hemicellulose groups. The content of serum HDL-cholesterol in the all experimental groups showed no significantly difference showing 39.8-44.7 mg/dL. HTR and atherogenic index were 0.44 and 1.27 in the control group, but 0.54 and 0.46-0.85 in the hemicellulose groups, respectively.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.159-162
• /
• 2007

The characteristic of air-assist spray injected into subsonic crossflow were studied experimentally. External-mixing air assist injector of Orifice nozzle with L/d of 3 were tested with various air-liquid ratio. Shadowgraph photography was performed for spray visualization and trajectory of spray measurements. The detailed spray structure was characterized in terms of SMD, velocity, and volume flux, using PDPA. Experimental results indicate that penetration length was increased and spray distribution was accelerated by increasing air-liquid ratio.

• Polymer(Korea)
• /
• v.35 no.1
• /
• pp.52-59
• /
• 2011

L-PLA or D-PLA was synthesized in bulk at $140^{\circ}C$ by ring opening polymerization(ROP) of L-lactide or D-lactide as a monomer using tin(II) octoate and lauryl alcohol as a catalyst and an initiator with changing the amounts of catalyst(0.25~1.0 wt%) and initiator(0.l~0.5 wt%). And stereocomplex-PLA was prepared by L-PLA/D-PLA having a wide range of molecular weight(30000~90000 g/mol) and L-PLA/D-PLA blends having different mixing ratio ($X_D$). The melting temperature. thermal degradation temperature and thermal stability of stereocomplex-PLA were higher than those of homopolymers(L-PLA, D-PLA). We supposed that these improvements arose from a strong interaction between L-PLA and D-PLA. The improved mechanical properties and changes in morphology of LPLA/D-PLA blends were compared to those of homopolymers(L-PLA, D-PLA).

• 한국체육학회지인문사회과학편
• /
• v.54 no.5
• /
• pp.727-737
• /
• 2015

The study investigated the relationship between vitamin D status and lifestyle risk factors in office workers. A total of 515 office workers(336 men and 179 women) aged 30 years or older were voluntarily recruited from S-city. Along with serum vitamin D levels, lifestyle risk factors including obesity index, physical fitness, metabolic risk factors, lipids profile and sedentary behavior were measured using standardized protocols. Subjects were classified as deficiency (<20ng/mL), insufficiency (20-29ng/mL), and sufficiency (≥30ng/mL) based on serum vitamin D levels. Linear contrast analysis using one-way ANOVA showed significant linear decreases in mean body fat (p=.030) and sedentary behavior (p<.001) and significant linear increases in skeletal muscle (p=.037), cardiorespiratory fitness (p<.001) and HDL-C (p=.013) across incremental serum vitamin D levels. Compared with the low cardiorespiratory fitness group, the high cardiorespiratory fitness group had a significantly higher odds ratio (men OR=2.144, p=.042, women OR=1.971, p=.045) for having vitamin D insufficiency or deficiency even adjustment after age. Compared to the shortest sitting time group, the longest sitting time group had a significantly higher odds-ratio in a group of female office workers (OR=1.262, p=.043) for having vitamin D insufficiency or deficiency even adjustment after age. The current findings of the study showed that poor physical fitness and sedentary behavior were the risk factors of low serum vitamin D levels, implying the urgent need for a healthy lifestyle modification along with vitamin D supplementation.

• Journal of Plant Biotechnology
• /
• v.32 no.1
• /
• pp.31-35
• /
• 2005

To obtain regeneration system of onion, we analyzed the effects of 2,4-D and BA concentration on the embryogenic callus induction from mature embryos. The highest embryogenic callus induction ratio was shown on MS medium (Murashie and Skoog 1962) containing $2.5\;\cal{mg/L}\;or\;5\;\cal{mg/L}$ picloram after mature embryos were placed on medium. When induced callus were cultured on half strength of MS medium containing $1\;\cal{mg/L}$ Kinetin, the highest shoot formation ratio was observed on MS medium containing $1\;{mg/L}$ 2,4-D and $1\;{mg/L}$ BA. Embryogenic callus were cultured in MS liquid medium containing $1\;\ccal{mg/L}$ of 2,4-D and $1\;\cal{mg/L}$ BA. The suspension cultured cell clumps could be mass propagated. Embryogenic callus were friable, but non-embryogenic callus included a lot of moisture, hence the identification between embryogenic and non-embryogenic callus as easily achieved. When embryogenic callus as cultured on half strength of MS medium containing $1\;\cal{mg/L}$ Kinetin, shoots were induced. The whole plantlet was obtained on rooting medium containing $0.5\;\cal{mg/}$ of NAA.