80pF capacitive couplers were connected to six 6.6kV motor model coil terminals. The voltage applied to the coils were 3.81kv, 4.76 kV and 6.6kV, respectively. These stator coils have various types of artificial insulation defects such as large voids, semi-conductive coating damage and strand insulation fault. Digital PD detector(PDD) and turbine generator analyzer(TGA) were used to measure PD activity. TGA summarizes each plot with two quantities such as the normalized quantity number(NQN) and the peak PD magnitude(Qm). The PD levels in PD were measured with a conventional digital PD detector. Most of the defect mechanism of large motor stator winding can be associated with PD patterns such as internal and slot discharges. PD patterns coincide with PDD and TGA. These instruments have an input bandwidth of 40-400kHz and 0.1-350MHz. Surge testing detects faults in inter-turn winding of high voltage motor model coils.
Kim, S.Y.;Kim, S.D.;Ryoo, S.R.;You, N.K.;Kim, T.B.;Hong, C.O.;Ko, H.S.
Journal of computational fluids engineering
/
v.19
no.3
/
pp.24-28
/
2014
With ever rising concerns about saving of fossil fuel resource, there have been an increasing demand for use of energy more efficiently. The electric motor driven inverters can be a great help to improve energy efficiency. They are also used to control the motor speed to the actual need. Therefore the use of them can lead to reduce energy consumption. In particular, the medium voltage(MV) drive systems used for pumps, fans, steel rolling mills and tractions have widespread applications in the industry. They cover power ratings from 0.4MW to 40MW at the MV level of 2.3kV to 13.8kV. The majority of the installed MV drive systems however, are in the 1MW to 4MW range with voltage rating from 3.3kV to 6.6kV. But they are required to reduce size and weight like other power electronic equipments. In this paper, we studied on the 3.3kV(105A) compact rack type inverter system for improving the cooling efficiency. At first, we confirmed the tendency of temperature with computational simulation using ANSYS ICEPAK and actual experimental tests. And then we researched thermal performance improvement designs in order to reduce temperature of the transformer for the safe operation. It can reduce temperature of transformer that using pipe type flow guide in the system. As a result, we found out more efficient solution by thermal-fluid analysis.
$Ba(Ti,Sn)O_3$ thin films, for use as dielectrics for MLCCs, were grown from Sn doped BaTiO3 sources by e-beam evaporation. The crystalline phase, microstructure, dielectric and electrical properties of films were investigated as a function of the (Ti+Sn)/Ba ratio. When $BaTiO_3$ sources doped with $20{\sim}50\;mol%$ of Sn were evaporated, $BaSnO_3$films were grown due to the higher vapor pressure of Ba and Sn than of Ti. However, it was possible to grow the $Ba(Ti,Sn)O_3$ thin films with {\leq}\;15\;mol%$ of Sn by co-evaporation of BTS and Ti metal sources. The (Ti+Sn)/Ba and Sn/Ti ratio affected the microstructure and surface roughness of films and the dielectric constant increased with increasing Sn content. The dielectric constant and dissipation factor of $Ba(Ti,Sn)O_3$ thin films with {\leq}\;15\;mol%$ of Sn showed the range of 120 to 160 and $2.5{\sim}5.5%$ at 1 KHz, respectively. The leakage current density of films was order of the $10^{-9}{\sim}10^{-8}A/cm^2$ at 300 KV/cm. The research results showed that it was feasible to grow the $Ba(Ti,Sn)O_3$ thin films as dielectrics for MLCCs by an e-beam evaporation technique.
Proceedings of the Korean Society of Developmental Biology Conference
/
2003.10a
/
pp.87-87
/
2003
난자성숙 중 MPF활성은 MI 과 MII에서 최대로, MII로의 성숙 직후 난자를 핵이식에 이용하는 것은 핵과 세포질 사이의 reprogramming에의 효율을 높일 수 있을 것이다. 일반적으로 돼지의 IVF나 핵이식은 체외성숙후 44h에 이뤄지고 있다. 이는 aging을 낳을 수 있고 aging은 또한 발달능을 떨어뜨릴 수 있다. 따라서, 본 실험은 돼지의 체외성숙시간에 따른 체외성숙율과 단위발생후 체외발달율을 비교하여 최적의 체외성숙시간을 찾고자 실시하였다. 돼지 난포란을 10% pFF, 0.1mg/ml cysteine, 10IU/ml PMSG, 10IU/ml hCG, 10ng/ml EGF가 첨가된 TCM-199배양액에서 22, 30, 44시간 동안 배양하여 성숙을 유도하였다. 체외성숙이 야기된 난자는 난구세포를 제거한 후 전기자극(2.0kv/cm, $30 \mu s$) 후 5분 동안 TCM-199에서 세정하고 다시 4시간 동안 6-DMAP에서 배양된 후 4mg/ml BSA가 첨가된 NCSU-23에 넣어 $39^{\circ}C$, 5% $CO_2$배양기에서 각각 6-7일 동안 배양을 실시하였다. 체외성숙 22시간 성숙난자는 M I 44.3%(35/79)와 A I -T I 36.7%(29/79)로 81%가 M II로의 성숙에는 아직 미치지 못했다. 30시간 성숙난자는 46.3%(56/121)가 M II로 성숙하였고, M I과 A I -T I 은 각각 25.6%(31/121), 27 3%(33/121)이었다. 44시간 성숙난자는 78%(71/91)가 M II로 성숙하였고, M I 과 A I -T I 은 각각 12.1%(31/121), 7 7%(33/121)이었다. 단위발생율은 22시간에 난할율은 35.4%(75/137)이었고, 배반포 발달은 없었다. 30시간에 난할율은 51.8%(145/280)이었고, 배반포 발달율은 5.5%(8/145)이었다. 44시간에 난할율은 80.0%(244/306)이었고, 배반포 발달율은 14.3%(35/144)이었다. 본 연구결과 핵 및 세포질의 완전한 성숙은 44h에 이루어지고, 이에 따른 배발달율도 뒤따름을 알 수 있었다. 난자가 핵성숙의 완성에도 불구하고 완전한 활성을 위한 발달능은 갖지 못함을 알 수 있었으며, 질 좋은 배반포 생산을 위해 핵과 세포질 성숙의 synchronous가 중요하다 사료된다. 체외성숙을 위한 배양기술의 진전과 더불어 체외성숙 시간에 따른 세포질적인 기전에 대한 연구가 필요하다.
The purpose of this study was to observe the effect on the removal of dentinal smear layer and morphological changes of reduced dentin surfaces by various dentin surface conditioners. Thirty-two healthy human premolars extracted due to periodontal or orthodontic reasons were used. The teeth were cross-sectioned to expose dentin at the middle portion of the crown with diamond rotary saw. The specimens were then divided into 8 groups. The sectioned dentin surfaces in group 1 to 4 were grinded with No. 400 grit silicone abrasive paper and those in group 5 to 8 were cut with #700 carbide bur under air-water spray. The grinded or cut dentin surfaces were conditioned with 3% $H_2O$, Dentin Conditioner(GC Inter. Corp., Japan), and Scotchprep(3M Dent Prod., U.S.A) according to manufacturer's directions. All the specimens were dried in room temperature for 48 hours, and gold-coated with Eiko ion coater(Eik-engineering Co.), and observed in Hitachi S-450 Scanning electron microscope at 15-25 KV. The following results were obtained; 1. The dentin surfaces grinded with the silicon abrasive paper were rougher in texture and heavier in amount of smear layer than those cut with the carbide bur. 2. Scrubbing of 3% $H_2O_2$ was not effective in removing dentinal smear layer. 3. 20-second conditioning of Dentin Conditioner (GC Inter. Corp) resulted in the removal of a significant amount of the smear layer without removing the tubular plugs and dissolving the peritubular dentin. 4. Scotchprep removed the smear layer very effectively. But at the same time it dissolved the peritubular dentin. 5. Irrespective of the uses of the silicon carbide abrasive paper or the carbide bur the morphological changes of dentin surfaces treated with the same conditioning agents were similar.
Radiation myelitis is a rather rare, but irreversible fatal complication. Etiology, pathologic change, clinical symptoms and the method of diagnosis have been studied with animal experiments and human necropsies. In spite of massive studies, pathogenesis of post-irradiation myelitis and the level of tolerance dose still remain controversial. Thoracolumbar spine of 110 hybrid mice were irradiated with orthovoltage x-ray machine. Mild capillary congestion and axonal swelling were observed in 1,000 rad irradiated specimens. Focal necrosis in 3,500 rad specimens, fragmentation of neural tissue in 4,000 rad specimens were also observed. These results suggest that 5,000 rad is not a completely safe tolerable dose which have been accepted and we cannot exclude direct radiation damage to news tissue as the causative pathology of radiation myelitis in addition to blood vessel damage.
Journal of the Korean Crystal Growth and Crystal Technology
/
v.7
no.4
/
pp.589-598
/
1997
The effects of PT/PZ ratio variations in a modified PZT system on crystal structure and electrical properties were studied. $0.05Pb(Sn_{0.5}Sb_{0.5})O_3+xPbTiO_3+yPbZrO_3$+0.4Wt% $MnO_2$(=0.55PSS+0.11PT+0.84PZ+0.4wt%$MnO_2$ ; x+y=0.95) systems with variations of PT/PZ from 0.50/0.45 to 0.l1/0.84 were sintered at $1250^{\circ}C$ for 2 hr, and then sintering density, crystal structure, dielctric, piezoelectric, pyroelectic and voltage responsity to infrared were investigated. Sintering density was increased from 7.52g/$\textrm {cm}^3$ to 7.82g/$\textrm {cm}^3$ with increasing PZ content. Dielectric constants at 1 KHz were decreased from 1147 to 193 with variation of PT/PZ from 0.50/0.45 to 0.l1/0.84 after poling of $4 KV_{DC}$/mm at $140^{\circ}C$ for 20 minutes. All Dielectric losses at 1 KHz were less than 1 % in all specimens. $K_{p}$ was increased near to 1 of PT/PZ, and maximun value of 48.2 % was .at 0.45/0.50. Pyroelectric coefficient of PT/PZ with 0.l1/0.84 was maximun value, 0.0541 C/$\m^2$K, and voltage responsity to infrared was 1.5 V.
Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
/
2006.06a
/
pp.327-328
/
2006
본 연구에서는 0-3 타입의 압전 세라믹 - 고분자 복합소재를 제조하기 위해서 $Pb(Zr_{0.54}Ti_{0.48})O_3$ + 0.2 wt% $Cr_2O_3$ + 1 wt% $Nb_2O_5$ 조성을 기본 조성으로 하여, 세라믹-고분자 첨가량에 따른 복합소재의 전기적 특성과 여러 분극조건, 즉 분극온도, 분극시간, 분극전압 변화에 의한 압전 특성을 고찰하였다. 세라믹 첨가비율이 증가함에 따라 유전상수와 압전상수($d_{33}$)는 증가하였으며, 전압상수($g_{33}$)는 급격히 감소하는 경향을 보였으며, 분극시간과 분극전압도 전기적 특성에 영향을 주는 것을 확인하였다. 분극전압 5KV 인가한 고분자 15% 첨가한 복합 소재에서 유전상수 13, 압전상수 $d_{33}$ 23(${\ast}10^{-12}C/N$), 전압상수 $g_{33}$ 170($10^{-3}v.m/N$)의 우수한 특성을 나타내었다.
This study investigated whether the addition of porcine sperm cytosolic factor (SCF) at fusion/activation affects in vitro development of porcine parthenogenetic(PA) and nuclear transfer (NT) embryos. To determine the optimum concentration of SCF, control group of oocytes was activated with 0.3M mannitol (1.0 mM $CaCl_2{\cdot}2H_2O$), other three groups of oocytes were parthenogentically activated with the fusion medium (0.1mM $CaCl_2{\cdot}2H_2O$) supplemented with 100, 200 or 300 ${\mu}$g/ml SCF, respectively. Matured oocytes were activated with two electric pulses (DC) of 1.2 kv/cm for 30 ${\mu}$sec. The activated embryos were cultured in PZM-3 under 5% $CO_2$ in air at $38.5^{\circ}C$ for 6 days. Oocytes activated in the presence of SCF showed a significantly higher blastocyst rate than control (p<0.05). Apoptosis rate was significantly lower in 100 ${\mu}$g/ml SCF group than other groups (p<0.05). Cdc2 kinase activity in control and SCF treatment group of oocytes was determined using MESACUP cdc2 kinase assay kit at 1, 5, 10, 15, 30, 45 and 60 min after activation. Cdc2 kinase activity was significantly decreased (p<0.05) in SCF group than MII oocytes or control within 5 min. For NT embryo production, reconstructed oocytes were fused in the fusion medium supplemented with 0.1 mM $CaCl_2{\cdot}2H_2O$ (T1), 1.0 mM $CaCl_2{\cdot}2H_2O$ (T2) and 0.1 mM $CaCl_2{\cdot}2H_2O$ with 100 ${\mu}$g/ml SCF (T3). Fused embryos were cultured in PZM-3 under 5% $CO_2$ in air at $38.5^{\circ}C$ for 6 days. Developmental rate to blastocyst stage was significantly higher in T3 than other groups (23.0% vs. 13.5 to 15.2%) (p<0.05). Apoptosis rate was significantly lower in T3 than T1 or T2 (p<0.05). The relative abundance of Bax-${\alpha}$/Bcl-xl was significantly lower in in vivo or SCF group than that of control (p<0.05). Moreover, the expression of p53 and caspase3 mRNA was significantly lower in in vivo or SCF group than that of control (p<0.05). These results indicate that the addition of SCF at fusion/activation might improve in vitro development of porcine NT embryos through regulating cdc2 kinase level and expression of apoptosis related genes.
This study was undertaken to determine effect of parboiling on physical and cooking characteristic properties of milled rice. Equilibrium moisture content(EMC) of parboiled rice soaked at room tempe-rature(25$^{\circ}C$) and high temperature(75$^{\circ}C$) increased 1.8∼2.7 times & 1.4∼l.6 times as compare to raw rice, and time to reach EMC of parboiled rice became longer 4 times and 1.7 times than raw rice respectively. Equilibrium volume(EV), time to reach EV and volume increase rate constants(ku) were similar to EMC, time to reach EMC, and k. kv of parboiled rice brought about in decrease at room temperature and increase at high temperature. The geletinization temperature, time and peak viscosity of parboiled rice were higher than those of raw rice. Parboiling brought about in decrease in L/W of cooked parboiled rice kernels and L/W increased according to presoaking time was prolo-nged. Solid content of cooking water of raw rice were higher than those of parboiled rice. Hardness of uncooked PL20 & PL40 soaked for 30 min was higher than that of raw rice but that of uncookef parboiled rice soaked for 90 min was lower than that of raw rice. Springness of cooked parboile rice for initial 10 min decresed with that of cooked raw rice and then increased sharply, cooked f, r 15 min then increased slowly, cooked parboiled rice for 40 min increased more than cooked raw rice. Color differences($\Delta$I) of PT2O samples was the lowest L value of all the samples increased but a and b value decreased according to milling degree was high.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.