• Wind and Structures
• /
• v.18 no.6
• /
• pp.651-668
• /
• 2014

Wind tunnel tests are conducted to investigate the wind loads on vertical fixed-roof cylindrical tanks with a very low aspect ratio of 0.275, which is a typical ratio for practical tanks with a volume of $100,000m^3$. Both the flat-roof tank and the dome-roof tank are investigated in present study. The first four moments of the measured wind pressure, including the mean and normalized deviation pressure, kurtosis and skewness of the pressure signal, are obtained to study the feature of the wind loads. It is shown that the wind loads are closely related to the behavior of flow around the structure. For either tank, the mean wind pressures on the cylinder are positive on the windward area and negative on the sides and the wake area, and the mean wind pressures on the whole roof are negative. The roof configurations have no considerable influence on the mean pressure distributions of cylindrical wall in general. Highly non-Gaussian feature is found in either tank. Conditional sampling technique, envelope method, and the proper orthogonal decomposition (POD) analysis are employed to investigate the characteristics of wind loads on the cylinder in more detail. It is shown that the patterns of wind pressure obtained from conditional sampling are similar to the mean pressure patterns.An instantaneous pressure coefficient can present a wide range from the maximum value to the minimum value. The quasi-steady assumption is not valid for structures considered in this paper according to the POD analysis.

• Journal of Families and Better Life
• /
• v.7 no.2
• /
• pp.85-94
• /
• 1989

The purpose of the study was to examine the characteristics of the Kansas Marital Satisfaction Scale(KMSS). KMSS was designed as a short and direct assessment of marital satisfaction. The scale consists of three items where respondents are directly asked how satisfied they are with their marriage, with their partner as a spouse, and with their relationship with their spouse. 1) Through item analysis, three items were significant discrimination for husbands and wives. 2) The KMSS consisted of 1 factor for husbands and wives. 3) Cronbach alpha estimates of internal consistency reliability of 93 for husband and of 89 for wives. 4) For wives, the item means between satifaction with their marriage and satisfaction with their relationsphip with their husbands were significantly different, even though the items were highly correlated. For husbands, three item means weren't significantly different. 5) The distribution of responses to the scale for husbands and wives departed si nificantly from normality in terms of skewness and kurtosis. 6) The scale was correlated, in expected directions, with the Marital Comparison Level Index (MCLI) and Marital Instability Index(MII), for husbands and wives. In conclusion, the scale offers promise for use in clinical evaluation and survey research where a brief but reliable measure of marital satisfaction is required.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.5
• /
• pp.856-866
• /
• 1987

In the present paper a statistical method using probability density function has been applied to investigate experimentally the flow patterns and fluctuations of time-averaged local void fraction in air-water two-phase mixtures which flow vertically upwards in concentric annuli. This study was carried out using three vertical concentric annuli. The annular test section consists of a lucite outer tube whose inside diameter is 38mm and a stainless steel inner rod. The rod diameter is either 12mm, 16mm or 20mm. The two-phase flow patterns observed in the experiment were bubbly, slug, annular and each transition patterns. It was first demonstrated that the variance, coefficients of skewness and kurtosis calculated from probability density function on time-averaged local void fraction can be used to identify the flow patterns in the annular passage, and the fluctuation of time-averaged local void fraction varies with the radial position in annular gap and the flow pattern.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.7
• /
• pp.679-686
• /
• 2013

The reduction unit is one of the most important components in railway cars, due to the transmission of torque from the motor to the wheels. Faulty reduction gears in high-speed trains result from excessive wear on the gear or damage to the gear. These types of gear defects have a significant effect on high-speed rail operation and safety; thus, a diagnosis system for the reduction unit is needed. Vibration diagnosis technology is one of the most effective diagnostics. In this paper, the vibration parameters of a reduction unit were evaluated during a driving-gear test and a full-vehicle test, using kurtosis and the crest factor. These tests were performed under normal operating conditions; a specimen tester was used to diagnose problems in defective gears.

• Journal of Fisheries and Marine Sciences Education
• /
• v.24 no.5
• /
• pp.616-626
• /
• 2012

The purpose of this study is to verify career maturity, achievement goal, learning attitude and academic achievement relation with subjects-related career education of middle school students. To achieve these aims, this study used SELS(Seoul education longitudinal study) of Seoul Education Research & Information Institute. Also, analysis as well as descriptive statistics calculation on average, deviation, skewness and kurtosis of variable factor and calculated characteristic item and degree of reliability(Cronbach ${\alpha}$). For goodness of fit test, this study used TLI(Tucker-Lewis index) and RMSEA(Root mean square error of approximation). To achieve the ultimate objects, this study used LMA(latent mean analysis) for analysis of difference career maturity, achievement goal, learning attitude and academic achievement relation with subjects-related career education in middle school students. The results are as follows. First, experience relation with subjects-related career education were influenced on career maturity with career cognition. Second, experience relation with subjects-related career education were influenced on achievement goal, learning attitude, and larger than career maturity and academic achievement. Third, experience relation with subjects-related career education were influenced on middle school students more than inexperienced relation with subjects-related career education.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.2
• /
• pp.185-190
• /
• 2010

Condition monitoring(CM) is a method based on non-destructive test(NDT). So, recently many kind of NDT were applied for CM. Acoustic emission(AE) is widely used for the early detection of faults in rotating machinery in these days because of high sensitivity than common accelerometers and detectable low energy vibration signals. And crack is considered one of severe fault in the rotating machine. Therefore, in this paper, study on early detection using AE has been accomplished for the crack of the low-speed shaft. There is a seeded initial crack on the shaft then the AE signal had been measured with low-speed rotation as the applied load condition. The signal detected from crack in rotating machine was detected by the AE transducer then the trend of crack growth had found out by using some of feature values such as peak value, skewness, kurtosis, crest factor, frequency center value(FC), variance frequency value(VF) and so on.

• Wind and Structures
• /
• v.24 no.1
• /
• pp.59-78
• /
• 2017

Non-stationarity and non-Gaussian property are two of the most important characteristics of wind. These two features are studied in this study based on wind speed records measured at different heights from a 325 m high meteorological tower during the synoptic wind storms. By using the time-frequency analysis tools, it is found that after removing the low frequency trend of the longitudinal wind, the retained fluctuating wind speeds remain to be asymmetrically non-Gaussian distributed. Results show that such non-Gaussianity is due to the weak-stationarity of the detrended fluctuating wind speed. The low frequency components of the fluctuating wind speeds mainly contribute to the non-zero skewness, while distribution of the high frequency component is found to have high kurtosis values. By further studying the decomposed wind speed, the mechanisms of the non-Gaussian distribution are examined from the phase, turbulence energy point of view.

• Earthquakes and Structures
• /
• v.11 no.6
• /
• pp.1143-1164
• /
• 2016

Time Delay of Arrival (TDOA) estimation methods based on correlation function analysis play an important role in the micro-seismic event monitoring. It makes full use of the similarity in the recorded signals that are from the same source. However, those methods are subjected to the noise effect, particularly when the global similarity of the signals is low. This paper proposes a new approach for micro-seismic monitoring based on cross wavelet transform. The cross wavelet transform is utilized to analyse the measured signals under micro-seismic events, and the cross wavelet power spectrum is used to measure the similarity of two signals in a multi-scale dimension and subsequently identify TDOA. The offset time instant associated with the maximum cross wavelet transform spectrum power is identified as TDOA, and then the location of micro-seismic event can be identified. Individual and statistical identification tests are performed with measurement data from an in-field mine. Experimental studies demonstrate that the proposed approach significantly improves the robustness and accuracy of micro-seismic source locating in mines compared to several existing methods, such as the cross-correlation, multi-correlation, STA/LTA and Kurtosis methods.

• Water for future
• /
• v.18 no.1
• /
• pp.57-65
• /
• 1985

In recent years, an increment of river engineering activities and more intensive use of flood plain, the river geomorphology has attracted considerable attention owing to an extensive land reclamation. One of the important problems is the maintenance of river meanders and almost all natural rivers exhibit the tendency to be a meander. A statistical analysis is applied to typifying their shapes and the meander characteristics are analyzed by channel model of line generalization algorithm in this study. This method is applied to Han River System. The results show that the variance of curvature is a better index to describe the meander intensity and the kurtosis is a good index to characterize the total lengh of the straight sections for a given reach. The channel model of line generalization algorithm gives good results in analysis of meander characteristics.

• Journal of the Korean Home Economics Association
• /
• v.51 no.1
• /
• pp.89-95
• /
• 2013

The purpose of this study is to identify a causal relationship among green consumer behavior, environmental knowledge and environmental attitudes of students at the university of education. A total of 366 copies of questionnaires were used for the data analysis; 31 copies were excluded due to lack of response to any given question. To ensure the reliability and validity of the questions, technical statistics were performed, such as frequency, ratio, average, standard deviation, skewness, and kurtosis via SPSS 15.0, item-total correlation and the totality, and reliability analysis. A structural analysis was undertaken via AMOS 7.0 in a bootstrapping method in order to perform a path analysis among variables as well as to assess the suitability of the model. The findings of the study were led to the following conclusions: First, the causal model among green consumer behavior, environmental knowledge and environmental attitudes of students at the university of education is suitable to the empirical analysis on research variables. Second, the environmental attitudes of students at the university of education has a direct, positive effect on green consumer behavior. Third, the environmental knowledge of students at the university of education has an indirect, positive effect on green consumer behavior.